ramips: add support for TP-Link RE305 v1
Specification: SoC: MediaTek MT7628AN RAM: 64MiB Flash: 8MiB Wifi: - 2.4GHz: MT7628AN - 5GHz: MT7612EN LAN: 1x 10/100 Mbps Flash instructions: Flash factory image through stock firmware WEB UI. Back to stock is possible by using TFTP and stripping down the Firmware provided by TP-Link to a initramfs. The flash space between 0x650000 and 0x7f0000 is blank in the stock firmware so I left it out as well. Signed-off-by: Steffen Förster <nemesis@chemnitz.freifunk.net>
This commit is contained in:
Steffen Förster
parent
c26b687e31
commit
93a4c8afbf
|
|
@ -0,0 +1,150 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,re305-v1", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link RE305 v1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "re305-v1:blue:power";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "re305-v1:blue:wlan2g";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "re305-v1:blue:wlan5g";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
rssi1 {
|
||||
label = "re305-v1:red:rssi";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssi2 {
|
||||
label = "re305-v1:blue:rssi";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x20000 0x5e0000>;
|
||||
};
|
||||
|
||||
config: partition@600000 {
|
||||
label = "config";
|
||||
reg = <0x600000 0x50000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/*
|
||||
The flash space between 0x650000 and 0x7f0000 is blank in the
|
||||
stock firmware so it is left out as well.
|
||||
*/
|
||||
|
||||
radio: partition@7f0000 {
|
||||
label = "radio";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
ralink,group = "refclk", "wdt", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
mt76@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&radio 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
mtd-mac-address = <&config 0x10008>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mediatek,mtd-eeprom = <&radio 0x0>;
|
||||
mtd-mac-address = <&config 0x10008>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&config 0x10008>;
|
||||
};
|
||||
|
|
@ -267,6 +267,20 @@ endef
|
|||
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD
|
||||
DEVICE_VARS += TPLINK_HVERSION
|
||||
|
||||
define Device/tplink-safeloader
|
||||
SOC := mt7628an
|
||||
DEVICE_VENDOR := TP-Link
|
||||
TPLINK_BOARD_ID :=
|
||||
TPLINK_HWID := 0x0
|
||||
TPLINK_HWREV := 0
|
||||
TPLINK_HEADER_VERSION := 1
|
||||
KERNEL := $(KERNEL_DTB) | tplink-v1-header -e -O
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
|
||||
append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||
endef
|
||||
|
||||
define Device/tplink_archer-c20-v4
|
||||
$(Device/tplink)
|
||||
IMAGE_SIZE := 7808k
|
||||
|
|
@ -328,6 +342,16 @@ define Device/tplink_archer-c50-v4
|
|||
endef
|
||||
TARGET_DEVICES += tplink_archer-c50-v4
|
||||
|
||||
define Device/tplink_re305-v1
|
||||
$(Device/tplink-safeloader)
|
||||
IMAGE_SIZE := 6016k
|
||||
DEVICE_MODEL := RE305
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_PACKAGES := kmod-mt76x2
|
||||
TPLINK_BOARD_ID := RE305-V1
|
||||
endef
|
||||
TARGET_DEVICES += tplink_re305-v1
|
||||
|
||||
define Device/tplink_tl-mr3020-v3
|
||||
$(Device/tplink)
|
||||
IMAGE_SIZE := 7808k
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ ramips_setup_interfaces()
|
|||
alfa-network,awusfree1|\
|
||||
d-team,pbr-d1|\
|
||||
tama,w06|\
|
||||
tplink,re305-v1|\
|
||||
tplink,tl-mr3020-v3|\
|
||||
tplink,tl-wr802n-v4)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
|
|
|
|||
|
|
@ -1437,6 +1437,42 @@ static struct device_info boards[] = {
|
|||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the RE305 v1 */
|
||||
{
|
||||
.id = "RE305-V1",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
|
||||
"{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
|
||||
.support_trail = '\x00',
|
||||
.soft_ver = NULL,
|
||||
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x20000},
|
||||
{"firmware", 0x20000, 0x5e0000},
|
||||
{"partition-table", 0x600000, 0x02000},
|
||||
{"default-mac", 0x610000, 0x00020},
|
||||
{"pin", 0x610100, 0x00020},
|
||||
{"product-info", 0x611100, 0x01000},
|
||||
{"soft-version", 0x620000, 0x01000},
|
||||
{"support-list", 0x621000, 0x01000},
|
||||
{"profile", 0x622000, 0x08000},
|
||||
{"user-config", 0x630000, 0x10000},
|
||||
{"default-config", 0x640000, 0x10000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the RE350 v1 */
|
||||
{
|
||||
.id = "RE350-V1",
|
||||
|
|
|
|||
Loading…
Reference in New Issue