ath79: add support for gl-ar750
This patch supports gl-ar750, which was previously supported by ar71xx. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 2xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Switch: 1x switch - Button: 1x reset button - LED: 3x LEDS (white) Flash instruction: Support for sysupgrade directive upgrades, as well as luci upgrades. Signed-off-by: Luochongjun <luochongjun@gl-inet.com>
This commit is contained in:
Luochongjun
Chuanhong Guo
parent
fb3574f123
commit
921675a2d1
|
|
@ -156,6 +156,11 @@ ath79_setup_interfaces()
|
|||
etactica,eg200)
|
||||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
glinet,gl-ar750)
|
||||
ucidef_set_interface_wan "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan"
|
||||
;;
|
||||
glinet,gl-ar750s)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
|
||||
|
|
|
|||
|
|
@ -122,6 +122,7 @@ case "$FIRMWARE" in
|
|||
ath10kcal_extract "art" 0x5000 0x844
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
|
||||
;;
|
||||
glinet,gl-ar750|\
|
||||
glinet,gl-ar750s)
|
||||
ath10kcal_extract "art" 0x5000 0x844
|
||||
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,142 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "glinet,gl-ar750", "qca,qca9531";
|
||||
model = "GL.iNet GL-AR750";
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
mode {
|
||||
label = "mode";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "gl-ar750:white:power";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "gl-ar750:white:wlan2g";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "gl-ar750:white:wlan5g";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
i2c {
|
||||
compatible = "i2c-gpio";
|
||||
|
||||
sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <0>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@50000 {
|
||||
label = "art";
|
||||
reg = <0x050000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x060000 0xfa0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
phy-handle = <&swphy4>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
|
@ -557,6 +557,16 @@ define Device/glinet_gl-ar300m-nor
|
|||
endef
|
||||
TARGET_DEVICES += glinet_gl-ar300m-nor
|
||||
|
||||
define Device/glinet_gl-ar750
|
||||
ATH_SOC := qca9531
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
DEVICE_MODEL := GL-AR750
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
||||
IMAGE_SIZE := 16000k
|
||||
SUPPORTED_DEVICES += gl-ar750
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-ar750
|
||||
|
||||
define Device/glinet_gl-ar750s
|
||||
ATH_SOC := qca9563
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
|
|
|
|||
Loading…
Reference in New Issue