mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-17 04:33:57 +02:00
Code Releases Activity

mvebu: remove obsolete Kernel 5.4

Browse Source 
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
This commit is contained in:
Paul Spooren 2021-10-01 11:28:36 -10:00 committed by Adrian Schmutzler
parent b48d30521d
commit 8ff8323335
73 changed files with 0 additions and 8546 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

421
target/linux/mvebu/config-5.4
View File

@ -1,421 +0,0 @@
CONFIG_AHCI_MVEBU=y
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARMADA_370_CLK=y
CONFIG_ARMADA_370_XP_IRQ=y
CONFIG_ARMADA_370_XP_TIMER=y
# CONFIG_ARMADA_37XX_WATCHDOG is not set
CONFIG_ARMADA_38X_CLK=y
CONFIG_ARMADA_THERMAL=y
CONFIG_ARMADA_XP_CLK=y
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_MVEBU_V7_CPUIDLE=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_LEDS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_FEROCEON_L2 is not set
CONFIG_CACHE_L2X0=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PJ4B=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_AES_ARM=y
CONFIG_CRYPTO_AES_ARM_BS=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_ESSIV=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=y
CONFIG_CRYPTO_SHA1_ARM_NEON=y
CONFIG_CRYPTO_SHA256_ARM=y
CONFIG_CRYPTO_SHA512_ARM=y
CONFIG_CRYPTO_SIMD=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_ALIGN_RODATA=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MVEBU_UART0=y
# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
CONFIG_DEBUG_UART_PHYS=0xd0012000
CONFIG_DEBUG_UART_VIRT=0xfec12000
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_DEBUG_USER=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DMA_OF=y
CONFIG_DMA_REMAP=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXT4_FS=y
CONFIG_EXTCON=y
CONFIG_F2FS_FS=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_SMP=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_HWBM=y
CONFIG_HWMON=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_PXA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_IWMMXT is not set
CONFIG_JBD2=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACH_ARMADA_370=y
# CONFIG_MACH_ARMADA_375 is not set
CONFIG_MACH_ARMADA_38X=y
# CONFIG_MACH_ARMADA_39X is not set
CONFIG_MACH_ARMADA_XP=y
# CONFIG_MACH_DOVE is not set
CONFIG_MACH_MVEBU_ANY=y
CONFIG_MACH_MVEBU_V7=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MANGLE_BOOTARGS=y
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_I2C=y
CONFIG_MEMFD_CREATE=y
CONFIG_MEMORY=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_CLK_COREDIV=y
CONFIG_MVEBU_CLK_CPU=y
CONFIG_MVEBU_DEVBUS=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
CONFIG_MVNETA_BM=y
CONFIG_MVNETA_BM_ENABLE=y
# CONFIG_MVPP2 is not set
CONFIG_MV_XOR=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_NR_CPUS=4
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_ORION_WATCHDOG=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PAGE_POOL=y
CONFIG_PCI=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MVEBU=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
CONFIG_PHY_MVEBU_A38X_COMPHY=y
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ARMADA_370=y
CONFIG_PINCTRL_ARMADA_38X=y
CONFIG_PINCTRL_ARMADA_XP=y
CONFIG_PINCTRL_MVEBU=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PJ4B_ERRATA_4742=y
CONFIG_PL310_ERRATA_753970=y
CONFIG_PLAT_ORION=y
CONFIG_PM_OPP=y
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_RATIONAL=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_MV=y
CONFIG_SATA_PMP=y
CONFIG_SCSI=y
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_TMP421=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SFP=y
CONFIG_SGL_ALLOC=y
CONFIG_SG_POOL=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SOC_BUS=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_ORION=y
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_ORION=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_PHY=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

92
target/linux/mvebu/cortexa53/config-5.4
View File

@ -1,92 +0,0 @@
CONFIG_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARM64=y
CONFIG_ARM64_4K_PAGES=y
CONFIG_ARM64_CONT_SHIFT=4
# CONFIG_ARM64_ERRATUM_1165522 is not set
# CONFIG_ARM64_ERRATUM_1286807 is not set
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_PA_BITS=48
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_SSBD=y
CONFIG_ARM64_SVE=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_ARM64_VA_BITS=39
CONFIG_ARM64_VA_BITS_39=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
# CONFIG_ARM_PL172_MPMC is not set
CONFIG_ARM_PSCI_FW=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
# CONFIG_DEBUG_ALIGN_RODATA is not set
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DRM_RCAR_WRITEBACK=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FUJITSU_ERRATUM_010001 is not set
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_MFD_SYSCON=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_PARTITION_PERCPU=y
CONFIG_PCI_AARDVARK=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_PHY_MVEBU_A3700_COMPHY=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_LINKSTATION is not set
CONFIG_POWER_SUPPLY=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_REGULATOR_GPIO=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SWIOTLB=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_VMAP_STACK=y
CONFIG_ZONE_DMA32=y

99
target/linux/mvebu/cortexa72/config-5.4
View File

@ -1,99 +0,0 @@
CONFIG_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARM64=y
CONFIG_ARM64_4K_PAGES=y
CONFIG_ARM64_CONT_SHIFT=4
# CONFIG_ARM64_ERRATUM_1165522 is not set
# CONFIG_ARM64_ERRATUM_1286807 is not set
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_PA_BITS=48
CONFIG_ARM64_PA_BITS_48=y
# CONFIG_ARM64_PTR_AUTH is not set
CONFIG_ARM64_SSBD=y
CONFIG_ARM64_SVE=y
# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
CONFIG_ARM64_VA_BITS=39
CONFIG_ARM64_VA_BITS_39=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
# CONFIG_ARM_PL172_MPMC is not set
CONFIG_ARM_PSCI_FW=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
# CONFIG_DEBUG_ALIGN_RODATA is not set
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DRM_RCAR_WRITEBACK=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FUJITSU_ERRATUM_010001 is not set
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_MARVELL_10G_PHY=y
CONFIG_MFD_SYSCON=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_MVPP2=y
CONFIG_MV_XOR_V2=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_PARTITION_PERCPU=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
# CONFIG_PCI_AARDVARK is not set
CONFIG_PGTABLE_LEVELS=3
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_LINKSTATION is not set
CONFIG_POWER_SUPPLY=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_RAS=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SWIOTLB=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_VMAP_STACK=y
CONFIG_ZONE_DMA32=y

28
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
View File

@ -1,28 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
* Copyright (C) 2018 Marvell
*
* Romain Perier <romain.perier@free-electrons.com>
* Konstantin Porotchkin <kostap@marvell.com>
*
*/
#include "armada-3720-espressobin.dts"
/ {
model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
"marvell,armada3720", "marvell,armada3710";
};
&sdhci0 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
mmccard: mmccard@0 {
compatible = "mmc-card";
reg = <0>;
};
};

43
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
View File

@ -1,43 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
* Copyright (C) 2018 Marvell
*
* Romain Perier <romain.perier@free-electrons.com>
* Konstantin Porotchkin <kostap@marvell.com>
*
*/
#include "armada-3720-espressobin.dts"
/ {
model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
"globalscale,espressobin", "marvell,armada3720",
"marvell,armada3710";
};
&ports {
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;
};
};
&sdhci0 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
mmccard: mmccard@0 {
compatible = "mmc-card";
reg = <0>;
};
};

31
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
View File

@ -1,31 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
* Copyright (C) 2018 Marvell
*
* Romain Perier <romain.perier@free-electrons.com>
* Konstantin Porotchkin <kostap@marvell.com>
*
*/
#include "armada-3720-espressobin.dts"
/ {
model = "Globalscale Marvell ESPRESSOBin Board V7";
compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
"marvell,armada3720", "marvell,armada3710";
};
&ports {
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;
};
};

55
target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
View File

@ -1,55 +0,0 @@
From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:35 +0200
Subject: [PATCH] arm64: dts: marvell: Add support for Marvell CN9130 SoC
support
A CN9130 SoC has one AP807 and one internal CP115.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 +++++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130 SoC.
+ */
+
+#include "armada-ap807-quad.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130 SoC";
+ compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
+ "marvell,armada-ap807";
+};
+
+/*
+ * Instantiate the internal CP115
+ */
+
+#define CP11X_NAME cp0
+#define CP11X_BASE f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
+ 0xe0000000 + ((iface - 1) * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP11X_PCIE0_BASE f2600000
+#define CP11X_PCIE1_BASE f2620000
+#define CP11X_PCIE2_BASE f2640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE

50
target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
View File

@ -1,50 +0,0 @@
From f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 Mon Sep 17 00:00:00 2001
From: Remi Pommarel <repk@triplefau.lt>
Date: Wed, 22 May 2019 23:33:50 +0200
Subject: [PATCH] PCI: aardvark: Wait for endpoint to be ready before training
link
When configuring pcie reset pin from gpio (e.g. initially set by
u-boot) to pcie function this pin goes low for a brief moment
asserting the PERST# signal. Thus connected device enters fundamental
reset process and link configuration can only begin after a minimal
100ms delay (see [1]).
Because the pin configuration comes from the "default" pinctrl it is
implicitly configured before the probe callback is called:
driver_probe_device()
really_probe()
...
pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
function and PERST# is asserted */
...
drv->probe()
[1] "PCI Express Base Specification", REV. 4.0
PCI Express, February 19 2014, 6.6.1 Conventional Reset
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -353,6 +353,14 @@ static void advk_pcie_setup_hw(struct ad
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
+ /*
+ * PERST# signal could have been asserted by pinctrl subsystem before
+ * probe() callback has been called, making the endpoint going into
+ * fundamental reset. As required by PCI Express spec a delay for at
+ * least 100ms after such a reset before link training is needed.
+ */
+ msleep(PCI_PM_D3COLD_WAIT);
+
/* Start link training */
reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
reg |= PCIE_CORE_LINK_TRAINING;

30
target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
View File

@ -1,30 +0,0 @@
From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:32 +0200
Subject: [PATCH] arm64: dts: marvell: Add support for CP115
Create a DTSI file based on the CP11x one. Differences will be
described in the near future.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE

1318
target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
View File

File diff suppressed because it is too large Load Diff

95
target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
View File

@ -1,95 +0,0 @@
From ff519e2acd463bff6c5bb4e8d7ed350c9bae885b Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:21 +0200
Subject: [PATCH 1/7] net: mvneta: introduce mvneta_update_stats routine
Introduce mvneta_update_stats routine to collect {rx/tx} statistics
(packets and bytes). This is a preliminary patch to add XDP support to
mvneta driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 43 ++++++++++++++-------------
1 file changed, 22 insertions(+), 21 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1913,6 +1913,23 @@ static void mvneta_rxq_drop_pkts(struct
}
}
+static void
+mvneta_update_stats(struct mvneta_port *pp, u32 pkts,
+ u32 len, bool tx)
+{
+ struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
+
+ u64_stats_update_begin(&stats->syncp);
+ if (tx) {
+ stats->tx_packets += pkts;
+ stats->tx_bytes += len;
+ } else {
+ stats->rx_packets += pkts;
+ stats->rx_bytes += len;
+ }
+ u64_stats_update_end(&stats->syncp);
+}
+
static inline
int mvneta_rx_refill_queue(struct mvneta_port *pp, struct mvneta_rx_queue *rxq)
{
@@ -2093,14 +2110,8 @@ static int mvneta_rx_swbm(struct napi_st
rxq->left_size = 0;
}
- if (rcvd_pkts) {
- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
-
- u64_stats_update_begin(&stats->syncp);
- stats->rx_packets += rcvd_pkts;
- stats->rx_bytes += rcvd_bytes;
- u64_stats_update_end(&stats->syncp);
- }
+ if (rcvd_pkts)
+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
/* return some buffers to hardware queue, one at a time is too slow */
refill = mvneta_rx_refill_queue(pp, rxq);
@@ -2223,14 +2234,8 @@ err_drop_frame:
napi_gro_receive(napi, skb);
}
- if (rcvd_pkts) {
- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
-
- u64_stats_update_begin(&stats->syncp);
- stats->rx_packets += rcvd_pkts;
- stats->rx_bytes += rcvd_bytes;
- u64_stats_update_end(&stats->syncp);
- }
+ if (rcvd_pkts)
+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
/* Update rxq management counters */
mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
@@ -2476,7 +2481,6 @@ static netdev_tx_t mvneta_tx(struct sk_b
out:
if (frags > 0) {
- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
struct netdev_queue *nq = netdev_get_tx_queue(dev, txq_id);
netdev_tx_sent_queue(nq, len);
@@ -2491,10 +2495,7 @@ out:
else
txq->pending += frags;
- u64_stats_update_begin(&stats->syncp);
- stats->tx_packets++;
- stats->tx_bytes += len;
- u64_stats_update_end(&stats->syncp);
+ mvneta_update_stats(pp, 1, len, true);
} else {
dev->stats.tx_dropped++;
dev_kfree_skb_any(skb);

102
target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
View File

@ -1,102 +0,0 @@
From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:24 +0200
Subject: [PATCH] arm64: dts: marvell: Add support for AP807/AP807-quad
Describe AP807 and AP807-quad support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../boot/dts/marvell/armada-ap807-quad.dtsi | 51 +++++++++++++++++++
arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++
2 files changed, 80 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+ model = "Marvell Armada AP807 Quad";
+ compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x001>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 0>;
+ };
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ };
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ #cooling-cells = <2>;
+ clocks = <&cpu_clk 1>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+ model = "Marvell Armada AP807";
+ compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+ ap_clk: clock {
+ compatible = "marvell,ap807-clock";
+ #clock-cells = <1>;
+ };
+};
+
+&ap_syscon1 {
+ cpu_clk: clock-cpu {
+ compatible = "marvell,ap807-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ };
+};

181
target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
View File

@ -1,181 +0,0 @@
From 568a3fa24a95476d40afe3f8616bafb543bc4182 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:22 +0200
Subject: [PATCH 2/7] net: mvneta: introduce page pool API for sw buffer
manager
Use the page_pool api for allocations and DMA handling instead of
__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
Pages are unmapped using page_pool_release_page before packets
go into the network stack.
The page_pool API offers buffer recycling capabilities for XDP but
allocates one page per packet, unless the driver splits and manages
the allocated page.
This is a preliminary patch to add XDP support to mvneta driver
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/Kconfig | 1 +
drivers/net/ethernet/marvell/mvneta.c | 83 +++++++++++++++++++++------
2 files changed, 65 insertions(+), 19 deletions(-)
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -61,6 +61,7 @@ config MVNETA
depends on ARCH_MVEBU || COMPILE_TEST
select MVMDIO
select PHYLINK
+ select PAGE_POOL
---help---
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -37,6 +37,7 @@
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/tso.h>
+#include <net/page_pool.h>
/* Registers */
#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
@@ -607,6 +608,10 @@ struct mvneta_rx_queue {
u32 pkts_coal;
u32 time_coal;
+ /* page_pool */
+ struct page_pool *page_pool;
+ struct xdp_rxq_info xdp_rxq;
+
/* Virtual address of the RX buffer */
void **buf_virt_addr;
@@ -1825,23 +1830,21 @@ static int mvneta_rx_refill(struct mvnet
struct mvneta_rx_queue *rxq,
gfp_t gfp_mask)
{
+ enum dma_data_direction dma_dir;
dma_addr_t phys_addr;
struct page *page;
- page = __dev_alloc_page(gfp_mask);
+ page = page_pool_alloc_pages(rxq->page_pool,
+ gfp_mask | __GFP_NOWARN);
if (!page)
return -ENOMEM;
- /* map page for use */
- phys_addr = dma_map_page(pp->dev->dev.parent, page, 0, PAGE_SIZE,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) {
- __free_page(page);
- return -ENOMEM;
- }
-
- phys_addr += pp->rx_offset_correction;
+ phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
+ dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
+ PAGE_SIZE, dma_dir);
mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
+
return 0;
}
@@ -1907,10 +1910,12 @@ static void mvneta_rxq_drop_pkts(struct
if (!data || !(rx_desc->buf_phys_addr))
continue;
- dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr,
- PAGE_SIZE, DMA_FROM_DEVICE);
- __free_page(data);
+ page_pool_put_page(rxq->page_pool, data, false);
}
+ if (xdp_rxq_info_is_reg(&rxq->xdp_rxq))
+ xdp_rxq_info_unreg(&rxq->xdp_rxq);
+ page_pool_destroy(rxq->page_pool);
+ rxq->page_pool = NULL;
}
static void
@@ -2047,8 +2052,7 @@ static int mvneta_rx_swbm(struct napi_st
skb_add_rx_frag(rxq->skb, frag_num, page,
frag_offset, frag_size,
PAGE_SIZE);
- dma_unmap_page(dev->dev.parent, phys_addr,
- PAGE_SIZE, DMA_FROM_DEVICE);
+ page_pool_release_page(rxq->page_pool, page);
rxq->left_size -= frag_size;
}
} else {
@@ -2078,9 +2082,7 @@ static int mvneta_rx_swbm(struct napi_st
frag_offset, frag_size,
PAGE_SIZE);
- dma_unmap_page(dev->dev.parent, phys_addr,
- PAGE_SIZE, DMA_FROM_DEVICE);
-
+ page_pool_release_page(rxq->page_pool, page);
rxq->left_size -= frag_size;
}
} /* Middle or Last descriptor */
@@ -2847,11 +2849,54 @@ static int mvneta_poll(struct napi_struc
return rx_done;
}
+static int mvneta_create_page_pool(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq, int size)
+{
+ struct page_pool_params pp_params = {
+ .order = 0,
+ .flags = PP_FLAG_DMA_MAP,
+ .pool_size = size,
+ .nid = cpu_to_node(0),
+ .dev = pp->dev->dev.parent,
+ .dma_dir = DMA_FROM_DEVICE,
+ };
+ int err;
+
+ rxq->page_pool = page_pool_create(&pp_params);
+ if (IS_ERR(rxq->page_pool)) {
+ err = PTR_ERR(rxq->page_pool);
+ rxq->page_pool = NULL;
+ return err;
+ }
+
+ err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id);
+ if (err < 0)
+ goto err_free_pp;
+
+ err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL,
+ rxq->page_pool);
+ if (err)
+ goto err_unregister_rxq;
+
+ return 0;
+
+err_unregister_rxq:
+ xdp_rxq_info_unreg(&rxq->xdp_rxq);
+err_free_pp:
+ page_pool_destroy(rxq->page_pool);
+ rxq->page_pool = NULL;
+ return err;
+}
+
/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
int num)
{
- int i;
+ int i, err;
+
+ err = mvneta_create_page_pool(pp, rxq, num);
+ if (err < 0)
+ return err;
for (i = 0; i < num; i++) {
memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc));

87
target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
View File

@ -1,87 +0,0 @@
From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00 2001
From: Grzegorz Jaszczyk <jaz@semihalf.com>
Date: Fri, 4 Oct 2019 16:27:27 +0200
Subject: [PATCH] arm64: dts: marvell: Add AP807-quad cache description
Adding appropriate entries to device-tree allows the cache description
to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../boot/dts/marvell/armada-ap807-quad.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -22,6 +22,13 @@
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
};
cpu1: cpu@1 {
device_type = "cpu";
@@ -30,6 +37,13 @@
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_0>;
};
cpu2: cpu@100 {
device_type = "cpu";
@@ -38,6 +52,13 @@
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
};
cpu3: cpu@101 {
device_type = "cpu";
@@ -46,6 +67,27 @@
enable-method = "psci";
#cooling-cells = <2>;
clocks = <&cpu_clk 1>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_1>;
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
};

303
target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
View File

@ -1,303 +0,0 @@
From 8dc9a0888f4c8e27b25e48ff1b4bc2b3a845cc2d Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:23 +0200
Subject: [PATCH 3/7] net: mvneta: rely on build_skb in mvneta_rx_swbm poll
routine
Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
allocate skb since the previous patch introduced buffer recycling using
the page_pool API.
This patch fixes even an issue in the original driver where dma buffers
are accessed before dma sync.
mvneta driver can run on not cache coherent devices so it is
necessary to sync DMA buffers before sending them to the device
in order to avoid memory corruptions. Running perf analysis we can
see a performance cost associated with this DMA-sync (anyway it is
already there in the original driver code). In follow up patches we
will add more logic to reduce DMA-sync as much as possible.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 185 +++++++++++++-------------
1 file changed, 95 insertions(+), 90 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -325,6 +325,11 @@
ETH_HLEN + ETH_FCS_LEN, \
cache_line_size())
+#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
+ NET_SKB_PAD))
+#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
+#define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD)
+
#define IS_TSO_HEADER(txq, addr) \
((addr >= txq->tso_hdrs_phys) && \
(addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
@@ -650,7 +655,6 @@ static int txq_number = 8;
static int rxq_def;
static int rx_copybreak __read_mostly = 256;
-static int rx_header_size __read_mostly = 128;
/* HW BM need that each port be identify by a unique ID */
static int global_port_id;
@@ -1842,7 +1846,7 @@ static int mvneta_rx_refill(struct mvnet
phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
dma_dir = page_pool_get_dma_dir(rxq->page_pool);
dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
- PAGE_SIZE, dma_dir);
+ MVNETA_MAX_RX_BUF_SIZE, dma_dir);
mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
return 0;
@@ -1960,30 +1964,102 @@ int mvneta_rx_refill_queue(struct mvneta
return i;
}
+static int
+mvneta_swbm_rx_frame(struct mvneta_port *pp,
+ struct mvneta_rx_desc *rx_desc,
+ struct mvneta_rx_queue *rxq,
+ struct page *page)
+{
+ unsigned char *data = page_address(page);
+ int data_len = -MVNETA_MH_SIZE, len;
+ struct net_device *dev = pp->dev;
+ enum dma_data_direction dma_dir;
+
+ if (MVNETA_SKB_SIZE(rx_desc->data_size) > PAGE_SIZE) {
+ len = MVNETA_MAX_RX_BUF_SIZE;
+ data_len += len;
+ } else {
+ len = rx_desc->data_size;
+ data_len += len - ETH_FCS_LEN;
+ }
+
+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
+ dma_sync_single_for_cpu(dev->dev.parent,
+ rx_desc->buf_phys_addr,
+ len, dma_dir);
+
+ rxq->skb = build_skb(data, PAGE_SIZE);
+ if (unlikely(!rxq->skb)) {
+ netdev_err(dev,
+ "Can't allocate skb on queue %d\n",
+ rxq->id);
+ dev->stats.rx_dropped++;
+ rxq->skb_alloc_err++;
+ return -ENOMEM;
+ }
+ page_pool_release_page(rxq->page_pool, page);
+
+ skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
+ skb_put(rxq->skb, data_len);
+ mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
+
+ rxq->left_size = rx_desc->data_size - len;
+ rx_desc->buf_phys_addr = 0;
+
+ return 0;
+}
+
+static void
+mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
+ struct mvneta_rx_desc *rx_desc,
+ struct mvneta_rx_queue *rxq,
+ struct page *page)
+{
+ struct net_device *dev = pp->dev;
+ enum dma_data_direction dma_dir;
+ int data_len, len;
+
+ if (rxq->left_size > MVNETA_MAX_RX_BUF_SIZE) {
+ len = MVNETA_MAX_RX_BUF_SIZE;
+ data_len = len;
+ } else {
+ len = rxq->left_size;
+ data_len = len - ETH_FCS_LEN;
+ }
+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
+ dma_sync_single_for_cpu(dev->dev.parent,
+ rx_desc->buf_phys_addr,
+ len, dma_dir);
+ if (data_len > 0) {
+ /* refill descriptor with new buffer later */
+ skb_add_rx_frag(rxq->skb,
+ skb_shinfo(rxq->skb)->nr_frags,
+ page, NET_SKB_PAD, data_len,
+ PAGE_SIZE);
+ }
+ page_pool_release_page(rxq->page_pool, page);
+ rx_desc->buf_phys_addr = 0;
+ rxq->left_size -= len;
+}
+
/* Main rx processing when using software buffer management */
static int mvneta_rx_swbm(struct napi_struct *napi,
struct mvneta_port *pp, int budget,
struct mvneta_rx_queue *rxq)
{
+ int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
struct net_device *dev = pp->dev;
- int rx_todo, rx_proc;
- int refill = 0;
- u32 rcvd_pkts = 0;
- u32 rcvd_bytes = 0;
+ int rx_todo, refill;
/* Get number of received packets */
rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
- rx_proc = 0;
/* Fairness NAPI loop */
- while ((rcvd_pkts < budget) && (rx_proc < rx_todo)) {
+ while (rx_proc < budget && rx_proc < rx_todo) {
struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
+ u32 rx_status, index;
unsigned char *data;
struct page *page;
- dma_addr_t phys_addr;
- u32 rx_status, index;
- int rx_bytes, skb_size, copy_size;
- int frag_num, frag_size, frag_offset;
index = rx_desc - rxq->descs;
page = (struct page *)rxq->buf_virt_addr[index];
@@ -1991,100 +2067,30 @@ static int mvneta_rx_swbm(struct napi_st
/* Prefetch header */
prefetch(data);
- phys_addr = rx_desc->buf_phys_addr;
rx_status = rx_desc->status;
rx_proc++;
rxq->refill_num++;
if (rx_status & MVNETA_RXD_FIRST_DESC) {
+ int err;
+
/* Check errors only for FIRST descriptor */
if (rx_status & MVNETA_RXD_ERR_SUMMARY) {
mvneta_rx_error(pp, rx_desc);
/* leave the descriptor untouched */
continue;
}
- rx_bytes = rx_desc->data_size -
- (ETH_FCS_LEN + MVNETA_MH_SIZE);
-
- /* Allocate small skb for each new packet */
- skb_size = max(rx_copybreak, rx_header_size);
- rxq->skb = netdev_alloc_skb_ip_align(dev, skb_size);
- if (unlikely(!rxq->skb)) {
- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
-
- netdev_err(dev,
- "Can't allocate skb on queue %d\n",
- rxq->id);
-
- rxq->skb_alloc_err++;
- u64_stats_update_begin(&stats->syncp);
- stats->rx_dropped++;
- u64_stats_update_end(&stats->syncp);
+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
+ if (err)
continue;
- }
- copy_size = min(skb_size, rx_bytes);
-
- /* Copy data from buffer to SKB, skip Marvell header */
- memcpy(rxq->skb->data, data + MVNETA_MH_SIZE,
- copy_size);
- skb_put(rxq->skb, copy_size);
- rxq->left_size = rx_bytes - copy_size;
-
- mvneta_rx_csum(pp, rx_status, rxq->skb);
- if (rxq->left_size == 0) {
- int size = copy_size + MVNETA_MH_SIZE;
-
- dma_sync_single_range_for_cpu(dev->dev.parent,
- phys_addr, 0,
- size,
- DMA_FROM_DEVICE);
-
- /* leave the descriptor and buffer untouched */
- } else {
- /* refill descriptor with new buffer later */
- rx_desc->buf_phys_addr = 0;
-
- frag_num = 0;
- frag_offset = copy_size + MVNETA_MH_SIZE;
- frag_size = min(rxq->left_size,
- (int)(PAGE_SIZE - frag_offset));
- skb_add_rx_frag(rxq->skb, frag_num, page,
- frag_offset, frag_size,
- PAGE_SIZE);
- page_pool_release_page(rxq->page_pool, page);
- rxq->left_size -= frag_size;
- }
} else {
- /* Middle or Last descriptor */
if (unlikely(!rxq->skb)) {
pr_debug("no skb for rx_status 0x%x\n",
rx_status);
continue;
}
- if (!rxq->left_size) {
- /* last descriptor has only FCS */
- /* and can be discarded */
- dma_sync_single_range_for_cpu(dev->dev.parent,
- phys_addr, 0,
- ETH_FCS_LEN,
- DMA_FROM_DEVICE);
- /* leave the descriptor and buffer untouched */
- } else {
- /* refill descriptor with new buffer later */
- rx_desc->buf_phys_addr = 0;
-
- frag_num = skb_shinfo(rxq->skb)->nr_frags;
- frag_offset = 0;
- frag_size = min(rxq->left_size,
- (int)(PAGE_SIZE - frag_offset));
- skb_add_rx_frag(rxq->skb, frag_num, page,
- frag_offset, frag_size,
- PAGE_SIZE);
-
- page_pool_release_page(rxq->page_pool, page);
- rxq->left_size -= frag_size;
- }
+ mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq, page);
} /* Middle or Last descriptor */
if (!(rx_status & MVNETA_RXD_LAST_DESC))
@@ -2109,7 +2115,6 @@ static int mvneta_rx_swbm(struct napi_st
/* clean uncomplete skb pointer in queue */
rxq->skb = NULL;
- rxq->left_size = 0;
}
if (rcvd_pkts)
@@ -2970,7 +2975,7 @@ static void mvneta_rxq_hw_init(struct mv
/* Set Offset */
mvneta_rxq_offset_set(pp, rxq, 0);
mvneta_rxq_buf_size_set(pp, rxq, PAGE_SIZE < SZ_64K ?
- PAGE_SIZE :
+ MVNETA_MAX_RX_BUF_SIZE :
MVNETA_RX_BUF_SIZE(pp->pkt_size));
mvneta_rxq_bm_disable(pp, rxq);
mvneta_rxq_fill(pp, rxq, rxq->size);
@@ -4713,7 +4718,7 @@ static int mvneta_probe(struct platform_
SET_NETDEV_DEV(dev, &pdev->dev);
pp->id = global_port_id++;
- pp->rx_offset_correction = 0; /* not relevant for SW BM */
+ pp->rx_offset_correction = NET_SKB_PAD;
/* Obtain access to BM resources if enabled and already initialized */
bm_node = of_parse_phandle(dn, "buffer-manager", 0);

135
target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
View File

@ -1,135 +0,0 @@
From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:30 +0200
Subject: [PATCH] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to
RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory
range. This shows that I/O memory has never been used/working on the
old SoCs despite the region being advertised. As PCIe I/O ranges will
not be supported in newer SoCs using CP11x co-processors, let's
simply drop them. It is not harmful in any case as PCIe device drivers
can do it all with the regular mapped memory anyway.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 2 --
.../boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +--
arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 4 ----
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 16 +++-------------
4 files changed, 4 insertions(+), 21 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -19,7 +19,6 @@
*/
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
-#define CP11X_PCIE_IO_BASE 0xf9000000
#define CP11X_PCIE_MEM_BASE 0xf6000000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
@@ -29,7 +28,6 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -179,8 +179,7 @@
num-lanes = <4>;
num-viewport = <8>;
reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
- ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
- 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+ ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
<&cp0_comphy2 0>, <&cp0_comphy3 0>;
phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -21,7 +21,6 @@
*/
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
-#define CP11X_PCIE_IO_BASE 0xf9000000
#define CP11X_PCIE_MEM_BASE 0xf6000000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
@@ -31,7 +30,6 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
@@ -42,7 +40,6 @@
*/
#define CP11X_NAME cp1
#define CP11X_BASE f4000000
-#define CP11X_PCIE_IO_BASE 0xfd000000
#define CP11X_PCIE_MEM_BASE 0xfa000000
#define CP11X_PCIE0_BASE f4600000
#define CP11X_PCIE1_BASE f4620000
@@ -52,7 +49,6 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_IO_BASE
#undef CP11X_PCIE_MEM_BASE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -10,7 +10,6 @@
#include "armada-common.dtsi"
-#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000))
#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
@@ -507,11 +506,8 @@
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
@@ -534,11 +530,8 @@
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
@@ -562,11 +555,8 @@
msi-parent = <&gic_v2m0>;
bus-range = <0 0xff>;
- ranges =
- /* downstream I/O */
- <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000
/* non-prefetchable memory */
- 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;

311
target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
View File

@ -1,311 +0,0 @@
From 0db51da7a8e99f0803ec3a8e25c1a66234a219cb Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:24 +0200
Subject: [PATCH 4/7] net: mvneta: add basic XDP support
Add basic XDP support to mvneta driver for devices that rely on software
buffer management. Currently supported verdicts are:
- XDP_DROP
- XDP_PASS
- XDP_REDIRECT
- XDP_ABORTED
- iptables drop:
$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
$nstat -n && sleep 1 && nstat
IpInReceives 151169 0.0
IpExtInOctets 6953544 0.0
IpExtInNoECTPkts 151165 0.0
- XDP_DROP via xdp1
$./samples/bpf/xdp1 3
proto 0: 421419 pkt/s
proto 0: 421444 pkt/s
proto 0: 421393 pkt/s
proto 0: 421440 pkt/s
proto 0: 421184 pkt/s
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 148 ++++++++++++++++++++++++--
1 file changed, 139 insertions(+), 9 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -38,6 +38,7 @@
#include <net/ipv6.h>
#include <net/tso.h>
#include <net/page_pool.h>
+#include <linux/bpf_trace.h>
/* Registers */
#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
@@ -325,8 +326,10 @@
ETH_HLEN + ETH_FCS_LEN, \
cache_line_size())
+#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
+ NET_IP_ALIGN)
#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
- NET_SKB_PAD))
+ MVNETA_SKB_HEADROOM))
#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
#define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD)
@@ -354,6 +357,11 @@ struct mvneta_statistic {
#define T_REG_64 64
#define T_SW 1
+#define MVNETA_XDP_PASS BIT(0)
+#define MVNETA_XDP_DROPPED BIT(1)
+#define MVNETA_XDP_TX BIT(2)
+#define MVNETA_XDP_REDIR BIT(3)
+
static const struct mvneta_statistic mvneta_statistics[] = {
{ 0x3000, T_REG_64, "good_octets_received", },
{ 0x3010, T_REG_32, "good_frames_received", },
@@ -435,6 +443,8 @@ struct mvneta_port {
u32 cause_rx_tx;
struct napi_struct napi;
+ struct bpf_prog *xdp_prog;
+
/* Core clock */
struct clk *clk;
/* AXI clock */
@@ -1965,10 +1975,50 @@ int mvneta_rx_refill_queue(struct mvneta
}
static int
+mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
+ struct bpf_prog *prog, struct xdp_buff *xdp)
+{
+ u32 ret, act = bpf_prog_run_xdp(prog, xdp);
+
+ switch (act) {
+ case XDP_PASS:
+ ret = MVNETA_XDP_PASS;
+ break;
+ case XDP_REDIRECT: {
+ int err;
+
+ err = xdp_do_redirect(pp->dev, xdp, prog);
+ if (err) {
+ ret = MVNETA_XDP_DROPPED;
+ xdp_return_buff(xdp);
+ } else {
+ ret = MVNETA_XDP_REDIR;
+ }
+ break;
+ }
+ default:
+ bpf_warn_invalid_xdp_action(act);
+ /* fall through */
+ case XDP_ABORTED:
+ trace_xdp_exception(pp->dev, prog, act);
+ /* fall through */
+ case XDP_DROP:
+ page_pool_recycle_direct(rxq->page_pool,
+ virt_to_head_page(xdp->data));
+ ret = MVNETA_XDP_DROPPED;
+ break;
+ }
+
+ return ret;
+}
+
+static int
mvneta_swbm_rx_frame(struct mvneta_port *pp,
struct mvneta_rx_desc *rx_desc,
struct mvneta_rx_queue *rxq,
- struct page *page)
+ struct xdp_buff *xdp,
+ struct bpf_prog *xdp_prog,
+ struct page *page, u32 *xdp_ret)
{
unsigned char *data = page_address(page);
int data_len = -MVNETA_MH_SIZE, len;
@@ -1988,7 +2038,26 @@ mvneta_swbm_rx_frame(struct mvneta_port
rx_desc->buf_phys_addr,
len, dma_dir);
- rxq->skb = build_skb(data, PAGE_SIZE);
+ xdp->data_hard_start = data;
+ xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
+ xdp->data_end = xdp->data + data_len;
+ xdp_set_data_meta_invalid(xdp);
+
+ if (xdp_prog) {
+ u32 ret;
+
+ ret = mvneta_run_xdp(pp, rxq, xdp_prog, xdp);
+ if (ret != MVNETA_XDP_PASS) {
+ mvneta_update_stats(pp, 1,
+ xdp->data_end - xdp->data,
+ false);
+ rx_desc->buf_phys_addr = 0;
+ *xdp_ret |= ret;
+ return ret;
+ }
+ }
+
+ rxq->skb = build_skb(xdp->data_hard_start, PAGE_SIZE);
if (unlikely(!rxq->skb)) {
netdev_err(dev,
"Can't allocate skb on queue %d\n",
@@ -1999,8 +2068,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
}
page_pool_release_page(rxq->page_pool, page);
- skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
- skb_put(rxq->skb, data_len);
+ skb_reserve(rxq->skb,
+ xdp->data - xdp->data_hard_start);
+ skb_put(rxq->skb, xdp->data_end - xdp->data);
mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
rxq->left_size = rx_desc->data_size - len;
@@ -2034,7 +2104,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
/* refill descriptor with new buffer later */
skb_add_rx_frag(rxq->skb,
skb_shinfo(rxq->skb)->nr_frags,
- page, NET_SKB_PAD, data_len,
+ page, MVNETA_SKB_HEADROOM, data_len,
PAGE_SIZE);
}
page_pool_release_page(rxq->page_pool, page);
@@ -2049,11 +2119,18 @@ static int mvneta_rx_swbm(struct napi_st
{
int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
struct net_device *dev = pp->dev;
+ struct bpf_prog *xdp_prog;
+ struct xdp_buff xdp_buf;
int rx_todo, refill;
+ u32 xdp_ret = 0;
/* Get number of received packets */
rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
+ rcu_read_lock();
+ xdp_prog = READ_ONCE(pp->xdp_prog);
+ xdp_buf.rxq = &rxq->xdp_rxq;
+
/* Fairness NAPI loop */
while (rx_proc < budget && rx_proc < rx_todo) {
struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
@@ -2081,7 +2158,8 @@ static int mvneta_rx_swbm(struct napi_st
continue;
}
- err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, &xdp_buf,
+ xdp_prog, page, &xdp_ret);
if (err)
continue;
} else {
@@ -2116,6 +2194,10 @@ static int mvneta_rx_swbm(struct napi_st
/* clean uncomplete skb pointer in queue */
rxq->skb = NULL;
}
+ rcu_read_unlock();
+
+ if (xdp_ret & MVNETA_XDP_REDIR)
+ xdp_do_flush_map();
if (rcvd_pkts)
mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
@@ -2857,13 +2939,14 @@ static int mvneta_poll(struct napi_struc
static int mvneta_create_page_pool(struct mvneta_port *pp,
struct mvneta_rx_queue *rxq, int size)
{
+ struct bpf_prog *xdp_prog = READ_ONCE(pp->xdp_prog);
struct page_pool_params pp_params = {
.order = 0,
.flags = PP_FLAG_DMA_MAP,
.pool_size = size,
.nid = cpu_to_node(0),
.dev = pp->dev->dev.parent,
- .dma_dir = DMA_FROM_DEVICE,
+ .dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE,
};
int err;
@@ -3366,6 +3449,11 @@ static int mvneta_change_mtu(struct net_
mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
}
+ if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) {
+ netdev_info(dev, "Illegal MTU value %d for XDP mode\n", mtu);
+ return -EINVAL;
+ }
+
dev->mtu = mtu;
if (!netif_running(dev)) {
@@ -4036,6 +4124,47 @@ static int mvneta_ioctl(struct net_devic
return phylink_mii_ioctl(pp->phylink, ifr, cmd);
}
+static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog *prog,
+ struct netlink_ext_ack *extack)
+{
+ bool need_update, running = netif_running(dev);
+ struct mvneta_port *pp = netdev_priv(dev);
+ struct bpf_prog *old_prog;
+
+ if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
+ NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not supported on XDP");
+ return -EOPNOTSUPP;
+ }
+
+ need_update = !!pp->xdp_prog != !!prog;
+ if (running && need_update)
+ mvneta_stop(dev);
+
+ old_prog = xchg(&pp->xdp_prog, prog);
+ if (old_prog)
+ bpf_prog_put(old_prog);
+
+ if (running && need_update)
+ return mvneta_open(dev);
+
+ return 0;
+}
+
+static int mvneta_xdp(struct net_device *dev, struct netdev_bpf *xdp)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ switch (xdp->command) {
+ case XDP_SETUP_PROG:
+ return mvneta_xdp_setup(dev, xdp->prog, xdp->extack);
+ case XDP_QUERY_PROG:
+ xdp->prog_id = pp->xdp_prog ? pp->xdp_prog->aux->id : 0;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
/* Ethtool methods */
/* Set link ksettings (phy address, speed) for ethtools */
@@ -4432,6 +4561,7 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,
+ .ndo_bpf = mvneta_xdp,
};
static const struct ethtool_ops mvneta_eth_tool_ops = {
@@ -4718,7 +4848,7 @@ static int mvneta_probe(struct platform_
SET_NETDEV_DEV(dev, &pdev->dev);
pp->id = global_port_id++;
- pp->rx_offset_correction = NET_SKB_PAD;
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
/* Obtain access to BM resources if enabled and already initialized */
bm_node = of_parse_phandle(dn, "buffer-manager", 0);

129
target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
View File

@ -1,129 +0,0 @@
From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:31 +0200
Subject: [PATCH] arm64: dts: marvell: Externalize PCIe macros from CP11x file
PCIe macros are specific to CP110 and will not fit CP115
constraints. To keep the same way the files are organized, just move
some macros out of the CP11x generic file and define them directly in
SoC DTSI, instead of defining single addresses in the SoC DTSI and
reusing them in macros.
In the end:
* CP11X_PCIE_MEM_BASE SoC define is dropped
* CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the
SoC files as it replaces the above definition.
* As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with
newer SoCs, we put it in the SoC files as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 6 ++++--
arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 12 ++++++++----
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 9 ++++-----
3 files changed, 16 insertions(+), 11 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -19,7 +19,8 @@
*/
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
-#define CP11X_PCIE_MEM_BASE 0xf6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
#define CP11X_PCIE2_BASE f2640000
@@ -28,7 +29,8 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -21,7 +21,8 @@
*/
#define CP11X_NAME cp0
#define CP11X_BASE f2000000
-#define CP11X_PCIE_MEM_BASE 0xf6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f2600000
#define CP11X_PCIE1_BASE f2620000
#define CP11X_PCIE2_BASE f2640000
@@ -30,7 +31,8 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
@@ -40,7 +42,8 @@
*/
#define CP11X_NAME cp1
#define CP11X_BASE f4000000
-#define CP11X_PCIE_MEM_BASE 0xfa000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f4600000
#define CP11X_PCIE1_BASE f4620000
#define CP11X_PCIE2_BASE f4640000
@@ -49,7 +52,8 @@
#undef CP11X_NAME
#undef CP11X_BASE
-#undef CP11X_PCIE_MEM_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -10,8 +10,7 @@
#include "armada-common.dtsi"
-#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
-#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
/ {
/*
@@ -507,7 +506,7 @@
bus-range = <0 0xff>;
/* non-prefetchable memory */
- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
@@ -531,7 +530,7 @@
bus-range = <0 0xff>;
/* non-prefetchable memory */
- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
@@ -556,7 +555,7 @@
bus-range = <0 0xff>;
/* non-prefetchable memory */
- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;

31
target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
View File

@ -1,31 +0,0 @@
From 525b0858ff2fdb78defec2d4d6d63baaa423d5fd Mon Sep 17 00:00:00 2001
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: Fri, 13 Mar 2020 16:42:44 +1300
Subject: [PATCH] gpio: mvebu: avoid error message for optional IRQ
platform_get_irq() will generate an error message if the requested irq
is not present
mvebu-gpio f1010140.gpio: IRQ index 3 not found
use platform_get_irq_optional() to avoid the error message being
generated.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/gpio/gpio-mvebu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -1248,7 +1248,7 @@ static int mvebu_gpio_probe(struct platf
* pins.
*/
for (i = 0; i < 4; i++) {
- int irq = platform_get_irq(pdev, i);
+ int irq = platform_get_irq_optional(pdev, i);
if (irq < 0)
continue;

43
target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
View File

@ -1,43 +0,0 @@
From fa383f6b77a2ed788266fa8fbfb659aa284d2f58 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:25 +0200
Subject: [PATCH 5/7] net: mvneta: move header prefetch in mvneta_swbm_rx_frame
Move data buffer prefetch in mvneta_swbm_rx_frame after
dma_sync_single_range_for_cpu
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2038,6 +2038,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
rx_desc->buf_phys_addr,
len, dma_dir);
+ /* Prefetch header */
+ prefetch(data);
+
xdp->data_hard_start = data;
xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
xdp->data_end = xdp->data + data_len;
@@ -2135,14 +2138,10 @@ static int mvneta_rx_swbm(struct napi_st
while (rx_proc < budget && rx_proc < rx_todo) {
struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
u32 rx_status, index;
- unsigned char *data;
struct page *page;
index = rx_desc - rxq->descs;
page = (struct page *)rxq->buf_virt_addr[index];
- data = page_address(page);
- /* Prefetch header */
- prefetch(data);
rx_status = rx_desc->status;
rx_proc++;

25
target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
View File

@ -1,25 +0,0 @@
From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:18 +0200
Subject: [PATCH] arm64: dts: marvell: Enumerate the first AP806 syscon
There are two system controllers in the AP80x, like for ap_syscon1,
enumerate the first one by renaming it s/ap_syscon/ap_syscon0/.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -246,7 +246,7 @@
status = "disabled";
};
- ap_syscon: system-controller@6f4000 {
+ ap_syscon0: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x2000>;

210
target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
View File

@ -1,210 +0,0 @@
From 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:26 +0200
Subject: [PATCH 6/7] net: mvneta: make tx buffer array agnostic
Allow tx buffer array to contain both skb and xdp buffers in order to
enable xdp frame recycling adding XDP_TX verdict support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++----------
1 file changed, 43 insertions(+), 23 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -565,6 +565,20 @@ struct mvneta_rx_desc {
};
#endif
+enum mvneta_tx_buf_type {
+ MVNETA_TYPE_SKB,
+ MVNETA_TYPE_XDP_TX,
+ MVNETA_TYPE_XDP_NDO,
+};
+
+struct mvneta_tx_buf {
+ enum mvneta_tx_buf_type type;
+ union {
+ struct xdp_frame *xdpf;
+ struct sk_buff *skb;
+ };
+};
+
struct mvneta_tx_queue {
/* Number of this TX queue, in the range 0-7 */
u8 id;
@@ -580,8 +594,8 @@ struct mvneta_tx_queue {
int tx_stop_threshold;
int tx_wake_threshold;
- /* Array of transmitted skb */
- struct sk_buff **tx_skb;
+ /* Array of transmitted buffers */
+ struct mvneta_tx_buf *buf;
/* Index of last TX DMA descriptor that was inserted */
int txq_put_index;
@@ -1793,14 +1807,9 @@ static void mvneta_txq_bufs_free(struct
int i;
for (i = 0; i < num; i++) {
+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_get_index];
struct mvneta_tx_desc *tx_desc = txq->descs +
txq->txq_get_index;
- struct sk_buff *skb = txq->tx_skb[txq->txq_get_index];
-
- if (skb) {
- bytes_compl += skb->len;
- pkts_compl++;
- }
mvneta_txq_inc_get(txq);
@@ -1808,9 +1817,12 @@ static void mvneta_txq_bufs_free(struct
dma_unmap_single(pp->dev->dev.parent,
tx_desc->buf_phys_addr,
tx_desc->data_size, DMA_TO_DEVICE);
- if (!skb)
+ if (!buf->skb)
continue;
- dev_kfree_skb_any(skb);
+
+ bytes_compl += buf->skb->len;
+ pkts_compl++;
+ dev_kfree_skb_any(buf->skb);
}
netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
@@ -2335,16 +2347,19 @@ static inline void
mvneta_tso_put_hdr(struct sk_buff *skb,
struct mvneta_port *pp, struct mvneta_tx_queue *txq)
{
- struct mvneta_tx_desc *tx_desc;
int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
+ struct mvneta_tx_desc *tx_desc;
- txq->tx_skb[txq->txq_put_index] = NULL;
tx_desc = mvneta_txq_next_desc_get(txq);
tx_desc->data_size = hdr_len;
tx_desc->command = mvneta_skb_tx_csum(pp, skb);
tx_desc->command |= MVNETA_TXD_F_DESC;
tx_desc->buf_phys_addr = txq->tso_hdrs_phys +
txq->txq_put_index * TSO_HEADER_SIZE;
+ buf->type = MVNETA_TYPE_SKB;
+ buf->skb = NULL;
+
mvneta_txq_inc_put(txq);
}
@@ -2353,6 +2368,7 @@ mvneta_tso_put_data(struct net_device *d
struct sk_buff *skb, char *data, int size,
bool last_tcp, bool is_last)
{
+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
struct mvneta_tx_desc *tx_desc;
tx_desc = mvneta_txq_next_desc_get(txq);
@@ -2366,7 +2382,8 @@ mvneta_tso_put_data(struct net_device *d
}
tx_desc->command = 0;
- txq->tx_skb[txq->txq_put_index] = NULL;
+ buf->type = MVNETA_TYPE_SKB;
+ buf->skb = NULL;
if (last_tcp) {
/* last descriptor in the TCP packet */
@@ -2374,7 +2391,7 @@ mvneta_tso_put_data(struct net_device *d
/* last descriptor in SKB */
if (is_last)
- txq->tx_skb[txq->txq_put_index] = skb;
+ buf->skb = skb;
}
mvneta_txq_inc_put(txq);
return 0;
@@ -2459,6 +2476,7 @@ static int mvneta_tx_frag_process(struct
int i, nr_frags = skb_shinfo(skb)->nr_frags;
for (i = 0; i < nr_frags; i++) {
+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
void *addr = skb_frag_address(frag);
@@ -2478,12 +2496,13 @@ static int mvneta_tx_frag_process(struct
if (i == nr_frags - 1) {
/* Last descriptor */
tx_desc->command = MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD;
- txq->tx_skb[txq->txq_put_index] = skb;
+ buf->skb = skb;
} else {
/* Descriptor in the middle: Not First, Not Last */
tx_desc->command = 0;
- txq->tx_skb[txq->txq_put_index] = NULL;
+ buf->skb = NULL;
}
+ buf->type = MVNETA_TYPE_SKB;
mvneta_txq_inc_put(txq);
}
@@ -2511,6 +2530,7 @@ static netdev_tx_t mvneta_tx(struct sk_b
struct mvneta_port *pp = netdev_priv(dev);
u16 txq_id = skb_get_queue_mapping(skb);
struct mvneta_tx_queue *txq = &pp->txqs[txq_id];
+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
struct mvneta_tx_desc *tx_desc;
int len = skb->len;
int frags = 0;
@@ -2543,16 +2563,17 @@ static netdev_tx_t mvneta_tx(struct sk_b
goto out;
}
+ buf->type = MVNETA_TYPE_SKB;
if (frags == 1) {
/* First and Last descriptor */
tx_cmd |= MVNETA_TXD_FLZ_DESC;
tx_desc->command = tx_cmd;
- txq->tx_skb[txq->txq_put_index] = skb;
+ buf->skb = skb;
mvneta_txq_inc_put(txq);
} else {
/* First but not Last */
tx_cmd |= MVNETA_TXD_F_DESC;
- txq->tx_skb[txq->txq_put_index] = NULL;
+ buf->skb = NULL;
mvneta_txq_inc_put(txq);
tx_desc->command = tx_cmd;
/* Continue with other skb fragments */
@@ -3138,9 +3159,8 @@ static int mvneta_txq_sw_init(struct mvn
txq->last_desc = txq->size - 1;
- txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb),
- GFP_KERNEL);
- if (!txq->tx_skb) {
+ txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf), GFP_KERNEL);
+ if (!txq->buf) {
dma_free_coherent(pp->dev->dev.parent,
txq->size * MVNETA_DESC_ALIGNED_SIZE,
txq->descs, txq->descs_phys);
@@ -3152,7 +3172,7 @@ static int mvneta_txq_sw_init(struct mvn
txq->size * TSO_HEADER_SIZE,
&txq->tso_hdrs_phys, GFP_KERNEL);
if (!txq->tso_hdrs) {
- kfree(txq->tx_skb);
+ kfree(txq->buf);
dma_free_coherent(pp->dev->dev.parent,
txq->size * MVNETA_DESC_ALIGNED_SIZE,
txq->descs, txq->descs_phys);
@@ -3207,7 +3227,7 @@ static void mvneta_txq_sw_deinit(struct
{
struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);
- kfree(txq->tx_skb);
+ kfree(txq->buf);
if (txq->tso_hdrs)
dma_free_coherent(pp->dev->dev.parent,

937
target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
View File

@ -1,937 +0,0 @@
From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001
From: Konstantin Porotchkin <kostap@marvell.com>
Date: Fri, 4 Oct 2019 16:27:22 +0200
Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807 based
SoCs
Prepare the support for Marvell AP807 die. This die is very similar to
AP806 but uses different DDR PHY. AP807 is a major component of CN9130
SoC series.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +----------------
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++
2 files changed, 458 insertions(+), 446 deletions(-)
create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -5,454 +5,10 @@
* Device Tree file for Marvell Armada AP806.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/dts-v1/;
+#define AP_NAME ap806
+#include "armada-ap80x.dtsi"
/ {
model = "Marvell Armada AP806";
compatible = "marvell,armada-ap806";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- gpio0 = &ap_gpio;
- spi0 = &spi0;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /*
- * This area matches the mapping done with a
- * mainline U-Boot, and should be updated by the
- * bootloader.
- */
-
- psci-area@4000000 {
- reg = <0x0 0x4000000 0x0 0x200000>;
- no-map;
- };
- };
-
- ap806 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- config-space@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
- gic: interrupt-controller@210000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x210000 0x10000>,
- <0x220000 0x20000>,
- <0x240000 0x20000>,
- <0x260000 0x20000>;
-
- gic_v2m0: v2m@280000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x280000 0x1000>;
- arm,msi-base-spi = <160>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m1: v2m@290000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x290000 0x1000>;
- arm,msi-base-spi = <192>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m2: v2m@2a0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2a0000 0x1000>;
- arm,msi-base-spi = <224>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m3: v2m@2b0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2b0000 0x1000>;
- arm,msi-base-spi = <256>;
- arm,msi-num-spis = <32>;
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu {
- compatible = "arm,cortex-a72-pmu";
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
-
- odmi: odmi@300000 {
- compatible = "marvell,odmi-controller";
- interrupt-controller;
- msi-controller;
- marvell,odmi-frames = <4>;
- reg = <0x300000 0x4000>,
- <0x304000 0x4000>,
- <0x308000 0x4000>,
- <0x30C000 0x4000>;
- marvell,spi-base = <128>, <136>, <144>, <152>;
- };
-
- gicp: gicp@3f0040 {
- compatible = "marvell,ap806-gicp";
- reg = <0x3f0040 0x10>;
- marvell,spi-ranges = <64 64>, <288 64>;
- msi-controller;
- };
-
- pic: interrupt-controller@3f0100 {
- compatible = "marvell,armada-8k-pic";
- reg = <0x3f0100 0x10>;
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- sei: interrupt-controller@3f0200 {
- compatible = "marvell,ap806-sei";
- reg = <0x3f0200 0x40>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <1>;
- interrupt-controller;
- msi-controller;
- };
-
- xor@400000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x400000 0x1000>,
- <0x410000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@420000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x420000 0x1000>,
- <0x430000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@440000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x440000 0x1000>,
- <0x450000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- xor@460000 {
- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
- reg = <0x460000 0x1000>,
- <0x470000 0x1000>;
- msi-parent = <&gic_v2m0>;
- clocks = <&ap_clk 3>;
- dma-coherent;
- };
-
- spi0: spi@510600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x510600 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- i2c0: i2c@511000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x511000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart0: serial@512000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512000 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
- };
-
- uart1: serial@512100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512100 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_clk 3>;
- status = "disabled";
-
- };
-
- watchdog: watchdog@610000 {
- compatible = "arm,sbsa-gwdt";
- reg = <0x610000 0x1000>, <0x600000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- ap_sdhci0: sdhci@6e0000 {
- compatible = "marvell,armada-ap806-sdhci";
- reg = <0x6e0000 0x300>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "core";
- clocks = <&ap_clk 4>;
- dma-coherent;
- marvell,xenon-phy-slow-mode;
- status = "disabled";
- };
-
- ap_syscon0: system-controller@6f4000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x2000>;
-
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
-
- ap_pinctrl: pinctrl {
- compatible = "marvell,ap806-pinctrl";
-
- uart0_pins: uart0-pins {
- marvell,pins = "mpp11", "mpp19";
- marvell,function = "uart0";
- };
- };
-
- ap_gpio: gpio@1040 {
- compatible = "marvell,armada-8k-gpio";
- offset = <0x1040>;
- ngpios = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&ap_pinctrl 0 0 20>;
- };
- };
-
- ap_syscon1: system-controller@6f8000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f8000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpu_clk: clock-cpu@278 {
- compatible = "marvell,ap806-cpu-clock";
- clocks = <&ap_clk 0>, <&ap_clk 1>;
- #clock-cells = <1>;
- reg = <0x278 0xa30>;
- };
-
- ap_thermal: thermal-sensor@80 {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x80 0x10>;
- interrupt-parent = <&sei>;
- interrupts = <18>;
- #thermal-sensor-cells = <1>;
- };
- };
- };
- };
-
- /*
- * The thermal IP features one internal sensor plus, if applicable, one
- * remote channel wired to one sensor per CPU.
- *
- * Only one thermal zone per AP/CP may trigger interrupts at a time, the
- * first one that will have a critical trip point will be chosen.
- */
- thermal-zones {
- ap_thermal_ic: ap-thermal-ic {
- polling-delay-passive = <0>; /* Interrupt driven */
- polling-delay = <0>; /* Interrupt driven */
-
- thermal-sensors = <&ap_thermal 0>;
-
- trips {
- ap_crit: ap-crit {
- temperature = <100000>; /* mC degrees */
- hysteresis = <2000>; /* mC degrees */
- type = "critical";
- };
- };
-
- cooling-maps { };
- };
-
- ap_thermal_cpu0: ap-thermal-cpu0 {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors = <&ap_thermal 1>;
-
- trips {
- cpu0_hot: cpu0-hot {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu0_emerg: cpu0-emerg {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map0_hot: map0-hot {
- trip = <&cpu0_hot>;
- cooling-device = <&cpu0 1 2>,
- <&cpu1 1 2>;
- };
- map0_emerg: map0-ermerg {
- trip = <&cpu0_emerg>;
- cooling-device = <&cpu0 3 3>,
- <&cpu1 3 3>;
- };
- };
- };
-
- ap_thermal_cpu1: ap-thermal-cpu1 {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors = <&ap_thermal 2>;
-
- trips {
- cpu1_hot: cpu1-hot {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu1_emerg: cpu1-emerg {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map1_hot: map1-hot {
- trip = <&cpu1_hot>;
- cooling-device = <&cpu0 1 2>,
- <&cpu1 1 2>;
- };
- map1_emerg: map1-emerg {
- trip = <&cpu1_emerg>;
- cooling-device = <&cpu0 3 3>,
- <&cpu1 3 3>;
- };
- };
- };
-
- ap_thermal_cpu2: ap-thermal-cpu2 {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors = <&ap_thermal 3>;
-
- trips {
- cpu2_hot: cpu2-hot {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu2_emerg: cpu2-emerg {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map2_hot: map2-hot {
- trip = <&cpu2_hot>;
- cooling-device = <&cpu2 1 2>,
- <&cpu3 1 2>;
- };
- map2_emerg: map2-emerg {
- trip = <&cpu2_emerg>;
- cooling-device = <&cpu2 3 3>,
- <&cpu3 3 3>;
- };
- };
- };
-
- ap_thermal_cpu3: ap-thermal-cpu3 {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors = <&ap_thermal 4>;
-
- trips {
- cpu3_hot: cpu3-hot {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu3_emerg: cpu3-emerg {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
- };
- };
-
- cooling-maps {
- map3_hot: map3-bhot {
- trip = <&cpu3_hot>;
- cooling-device = <&cpu2 1 2>,
- <&cpu3 1 2>;
- };
- map3_emerg: map3-emerg {
- trip = <&cpu3_emerg>;
- cooling-device = <&cpu2 3 3>,
- <&cpu3 3 3>;
- };
- };
- };
- };
};
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP80x.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ gpio0 = &ap_gpio;
+ spi0 = &spi0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /*
+ * This area matches the mapping done with a
+ * mainline U-Boot, and should be updated by the
+ * bootloader.
+ */
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ AP_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+ gic: interrupt-controller@210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x210000 0x10000>,
+ <0x220000 0x20000>,
+ <0x240000 0x20000>,
+ <0x260000 0x20000>;
+
+ gic_v2m0: v2m@280000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x280000 0x1000>;
+ arm,msi-base-spi = <160>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m1: v2m@290000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x290000 0x1000>;
+ arm,msi-base-spi = <192>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m2: v2m@2a0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2a0000 0x1000>;
+ arm,msi-base-spi = <224>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m3: v2m@2b0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2b0000 0x1000>;
+ arm,msi-base-spi = <256>;
+ arm,msi-num-spis = <32>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+
+ odmi: odmi@300000 {
+ compatible = "marvell,odmi-controller";
+ interrupt-controller;
+ msi-controller;
+ marvell,odmi-frames = <4>;
+ reg = <0x300000 0x4000>,
+ <0x304000 0x4000>,
+ <0x308000 0x4000>,
+ <0x30C000 0x4000>;
+ marvell,spi-base = <128>, <136>, <144>, <152>;
+ };
+
+ gicp: gicp@3f0040 {
+ compatible = "marvell,ap806-gicp";
+ reg = <0x3f0040 0x10>;
+ marvell,spi-ranges = <64 64>, <288 64>;
+ msi-controller;
+ };
+
+ pic: interrupt-controller@3f0100 {
+ compatible = "marvell,armada-8k-pic";
+ reg = <0x3f0100 0x10>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
+ xor@400000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x400000 0x1000>,
+ <0x410000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@420000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x420000 0x1000>,
+ <0x430000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@440000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x440000 0x1000>,
+ <0x450000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ xor@460000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x460000 0x1000>,
+ <0x470000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ clocks = <&ap_clk 3>;
+ dma-coherent;
+ };
+
+ spi0: spi@510600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x510600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@511000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x511000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart0: serial@512000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+ };
+
+ uart1: serial@512100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_clk 3>;
+ status = "disabled";
+
+ };
+
+ watchdog: watchdog@610000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_clk 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
+ ap_syscon0: system-controller@6f4000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f4000 0x2000>;
+
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp11", "mpp19";
+ marvell,function = "uart0";
+ };
+ };
+
+ ap_gpio: gpio@1040 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 20>;
+ };
+ };
+
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_clk: clock-cpu@278 {
+ compatible = "marvell,ap806-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ reg = <0x278 0xa30>;
+ };
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ interrupt-parent = <&sei>;
+ interrupts = <18>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+ };
+ };
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+ * first one that will have a critical trip point will be chosen.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <0>; /* Interrupt driven */
+ polling-delay = <0>; /* Interrupt driven */
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips {
+ ap_crit: ap-crit {
+ temperature = <100000>; /* mC degrees */
+ hysteresis = <2000>; /* mC degrees */
+ type = "critical";
+ };
+ };
+
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu0: ap-thermal-cpu0 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips {
+ cpu0_hot: cpu0-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_emerg: cpu0-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0_hot: map0-hot {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map0_emerg: map0-ermerg {
+ trip = <&cpu0_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips {
+ cpu1_hot: cpu1-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_emerg: cpu1-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map1_hot: map1-hot {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map1_emerg: map1-emerg {
+ trip = <&cpu1_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips {
+ cpu2_hot: cpu2-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_emerg: cpu2-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map2_hot: map2-hot {
+ trip = <&cpu2_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map2_emerg: map2-emerg {
+ trip = <&cpu2_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips {
+ cpu3_hot: cpu3-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_emerg: cpu3-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map3_hot: map3-bhot {
+ trip = <&cpu3_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map3_emerg: map3-emerg {
+ trip = <&cpu3_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
+ };
+ };
+};

175
target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
View File

@ -1,175 +0,0 @@
From b0a43db9087a21d96e1a0b716b8d9963064b2d58 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Sat, 19 Oct 2019 10:13:27 +0200
Subject: [PATCH 7/7] net: mvneta: add XDP_TX support
Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
pointer
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 128 ++++++++++++++++++++++++--
1 file changed, 121 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1813,16 +1813,19 @@ static void mvneta_txq_bufs_free(struct
mvneta_txq_inc_get(txq);
- if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr))
+ if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr) &&
+ buf->type != MVNETA_TYPE_XDP_TX)
dma_unmap_single(pp->dev->dev.parent,
tx_desc->buf_phys_addr,
tx_desc->data_size, DMA_TO_DEVICE);
- if (!buf->skb)
- continue;
-
- bytes_compl += buf->skb->len;
- pkts_compl++;
- dev_kfree_skb_any(buf->skb);
+ if (buf->type == MVNETA_TYPE_SKB && buf->skb) {
+ bytes_compl += buf->skb->len;
+ pkts_compl++;
+ dev_kfree_skb_any(buf->skb);
+ } else if (buf->type == MVNETA_TYPE_XDP_TX ||
+ buf->type == MVNETA_TYPE_XDP_NDO) {
+ xdp_return_frame(buf->xdpf);
+ }
}
netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
@@ -1987,6 +1990,111 @@ int mvneta_rx_refill_queue(struct mvneta
}
static int
+mvneta_xdp_submit_frame(struct mvneta_port *pp, struct mvneta_tx_queue *txq,
+ struct xdp_frame *xdpf, bool dma_map)
+{
+ struct mvneta_tx_desc *tx_desc;
+ struct mvneta_tx_buf *buf;
+ dma_addr_t dma_addr;
+
+ if (txq->count >= txq->tx_stop_threshold)
+ return MVNETA_XDP_DROPPED;
+
+ tx_desc = mvneta_txq_next_desc_get(txq);
+
+ buf = &txq->buf[txq->txq_put_index];
+ if (dma_map) {
+ /* ndo_xdp_xmit */
+ dma_addr = dma_map_single(pp->dev->dev.parent, xdpf->data,
+ xdpf->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) {
+ mvneta_txq_desc_put(txq);
+ return MVNETA_XDP_DROPPED;
+ }
+ buf->type = MVNETA_TYPE_XDP_NDO;
+ } else {
+ struct page *page = virt_to_page(xdpf->data);
+
+ dma_addr = page_pool_get_dma_addr(page) +
+ sizeof(*xdpf) + xdpf->headroom;
+ dma_sync_single_for_device(pp->dev->dev.parent, dma_addr,
+ xdpf->len, DMA_BIDIRECTIONAL);
+ buf->type = MVNETA_TYPE_XDP_TX;
+ }
+ buf->xdpf = xdpf;
+
+ tx_desc->command = MVNETA_TXD_FLZ_DESC;
+ tx_desc->buf_phys_addr = dma_addr;
+ tx_desc->data_size = xdpf->len;
+
+ mvneta_update_stats(pp, 1, xdpf->len, true);
+ mvneta_txq_inc_put(txq);
+ txq->pending++;
+ txq->count++;
+
+ return MVNETA_XDP_TX;
+}
+
+static int
+mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
+{
+ struct mvneta_tx_queue *txq;
+ struct netdev_queue *nq;
+ struct xdp_frame *xdpf;
+ int cpu;
+ u32 ret;
+
+ xdpf = convert_to_xdp_frame(xdp);
+ if (unlikely(!xdpf))
+ return MVNETA_XDP_DROPPED;
+
+ cpu = smp_processor_id();
+ txq = &pp->txqs[cpu % txq_number];
+ nq = netdev_get_tx_queue(pp->dev, txq->id);
+
+ __netif_tx_lock(nq, cpu);
+ ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false);
+ if (ret == MVNETA_XDP_TX)
+ mvneta_txq_pend_desc_add(pp, txq, 0);
+ __netif_tx_unlock(nq);
+
+ return ret;
+}
+
+static int
+mvneta_xdp_xmit(struct net_device *dev, int num_frame,
+ struct xdp_frame **frames, u32 flags)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+ int cpu = smp_processor_id();
+ struct mvneta_tx_queue *txq;
+ struct netdev_queue *nq;
+ int i, drops = 0;
+ u32 ret;
+
+ if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
+ return -EINVAL;
+
+ txq = &pp->txqs[cpu % txq_number];
+ nq = netdev_get_tx_queue(pp->dev, txq->id);
+
+ __netif_tx_lock(nq, cpu);
+ for (i = 0; i < num_frame; i++) {
+ ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true);
+ if (ret != MVNETA_XDP_TX) {
+ xdp_return_frame_rx_napi(frames[i]);
+ drops++;
+ }
+ }
+
+ if (unlikely(flags & XDP_XMIT_FLUSH))
+ mvneta_txq_pend_desc_add(pp, txq, 0);
+ __netif_tx_unlock(nq);
+
+ return num_frame - drops;
+}
+
+static int
mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
struct bpf_prog *prog, struct xdp_buff *xdp)
{
@@ -2008,6 +2116,11 @@ mvneta_run_xdp(struct mvneta_port *pp, s
}
break;
}
+ case XDP_TX:
+ ret = mvneta_xdp_xmit_back(pp, xdp);
+ if (ret != MVNETA_XDP_TX)
+ xdp_return_buff(xdp);
+ break;
default:
bpf_warn_invalid_xdp_action(act);
/* fall through */
@@ -4581,6 +4694,7 @@ static const struct net_device_ops mvnet
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,
.ndo_bpf = mvneta_xdp,
+ .ndo_xdp_xmit = mvneta_xdp_xmit,
};
static const struct ethtool_ops mvneta_eth_tool_ops = {

65
target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
View File

@ -1,65 +0,0 @@
From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Fri, 4 Oct 2019 16:27:23 +0200
Subject: [PATCH] arm64: dts: marvell: Move clocks to AP806 specific file
Regular clocks and CPU clocks are specific to AP806, move them out of
the generic AP80x file so that AP807 can use its own clocks.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------
2 files changed, 16 insertions(+), 12 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -12,3 +12,19 @@
model = "Marvell Armada AP806";
compatible = "marvell,armada-ap806";
};
+
+&ap_syscon0 {
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
+};
+
+&ap_syscon1 {
+ cpu_clk: clock-cpu@278 {
+ compatible = "marvell,ap806-cpu-clock";
+ clocks = <&ap_clk 0>, <&ap_clk 1>;
+ #clock-cells = <1>;
+ reg = <0x278 0xa30>;
+ };
+};
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -248,11 +248,6 @@
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x2000>;
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
-
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
@@ -278,13 +273,6 @@
#address-cells = <1>;
#size-cells = <1>;
- cpu_clk: clock-cpu@278 {
- compatible = "marvell,ap806-cpu-clock";
- clocks = <&ap_clk 0>, <&ap_clk 1>;
- #clock-cells = <1>;
- reg = <0x278 0xa30>;
- };
-
ap_thermal: thermal-sensor@80 {
compatible = "marvell,armada-ap806-thermal";
reg = <0x80 0x10>;

41
target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
View File

@ -1,41 +0,0 @@
From b37fa92e20ef28aada852cbf03b368d29a20478c Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Thu, 14 Nov 2019 01:25:55 +0200
Subject: [PATCH] net: mvneta: fix build skb for bm capable devices
Fix build_skb for bm capable devices when they fall-back using swbm path
(e.g. when bm properties are configured in device tree but
CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is
overwritten so we need to use it building skb instead of
MVNETA_SKB_HEADROOM directly
Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine")
Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reported-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2167,7 +2167,7 @@ mvneta_swbm_rx_frame(struct mvneta_port
prefetch(data);
xdp->data_hard_start = data;
- xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
+ xdp->data = data + pp->rx_offset_correction + MVNETA_MH_SIZE;
xdp->data_end = xdp->data + data_len;
xdp_set_data_meta_invalid(xdp);
@@ -2232,7 +2232,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
/* refill descriptor with new buffer later */
skb_add_rx_frag(rxq->skb,
skb_shinfo(rxq->skb)->nr_frags,
- page, MVNETA_SKB_HEADROOM, data_len,
+ page, pp->rx_offset_correction, data_len,
PAGE_SIZE);
}
page_pool_release_page(rxq->page_pool, page);

31
target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
View File

@ -1,31 +0,0 @@
From fe3ec631a77ded87817f449691710a436a80caa7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sat, 16 Nov 2019 11:07:01 +0000
Subject: [PATCH] arm64: dts: uDPU: remove i2c-fast-mode
The I2C bus violates the timing specifications when run in fast mode
on the uDPU, so switch to 100kHz mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -119,12 +119,14 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
+ /delete-property/mrvl,i2c-fast-mode;
lm75@48 {
status = "okay";

34
target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
View File

@ -1,34 +0,0 @@
From cd592187f9de3c6305d6c1c66f7fac084cb5b846 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 19 Nov 2019 22:53:04 +0000
Subject: [PATCH] arm64: dts: uDPU: SFP cages support 3W modules
The SFP cages are designed to support up to 3W modules, such as G.hn,
G.fast and MoCA modules. Although there is no way for such modules to
declare to software that they consume 3W, we document in DT that this
is the designed power level for these cages.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -69,6 +69,7 @@
mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
sfp_eth1: sfp-eth1 {
@@ -78,6 +79,7 @@
mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <3000>;
};
};

39
target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
View File

@ -1,39 +0,0 @@
From f383b2950070ce4f34e74db94f70bb565b746e97 Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Wed, 20 Nov 2019 16:54:17 +0200
Subject: [PATCH] net: mvneta: rely on page_pool_recycle_direct in
mvneta_run_xdp
Rely on page_pool_recycle_direct and not on xdp_return_buff in
mvneta_run_xdp. This is a preliminary patch to limit the dma sync len
to the one strictly necessary
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2110,7 +2110,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
err = xdp_do_redirect(pp->dev, xdp, prog);
if (err) {
ret = MVNETA_XDP_DROPPED;
- xdp_return_buff(xdp);
+ page_pool_recycle_direct(rxq->page_pool,
+ virt_to_head_page(xdp->data));
} else {
ret = MVNETA_XDP_REDIR;
}
@@ -2119,7 +2120,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
case XDP_TX:
ret = mvneta_xdp_xmit_back(pp, xdp);
if (ret != MVNETA_XDP_TX)
- xdp_return_buff(xdp);
+ page_pool_recycle_direct(rxq->page_pool,
+ virt_to_head_page(xdp->data));
break;
default:
bpf_warn_invalid_xdp_action(act);

53
target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
View File

@ -1,53 +0,0 @@
From 79572c98c554dcdb080bca547c871a51716dcdf8 Mon Sep 17 00:00:00 2001
From: Sven Auhagen <sven.auhagen@voleatech.de>
Date: Sat, 25 Jan 2020 08:07:03 +0000
Subject: [PATCH] mvneta driver disallow XDP program on hardware buffer
management
Recently XDP Support was added to the mvneta driver
for software buffer management only.
It is still possible to attach an XDP program if
hardware buffer management is used.
It is not doing anything at that point.
The patch disallows attaching XDP programs to mvneta
if hardware buffer management is used.
I am sorry about that. It is my first submission and I am having
some troubles with the format of my emails.
v4 -> v5:
- Remove extra tabs
v3 -> v4:
- Please ignore v3 I accidentally submitted
my other patch with git-send-mail and v4 is correct
v2 -> v3:
- My mailserver corrupted the patch
resubmission with git-send-email
v1 -> v2:
- Fixing the patches indentation
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4270,6 +4270,12 @@ static int mvneta_xdp_setup(struct net_d
return -EOPNOTSUPP;
}
+ if (pp->bm_priv) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Hardware Buffer Management not supported on XDP");
+ return -EOPNOTSUPP;
+ }
+
need_update = !!pp->xdp_prog != !!prog;
if (running && need_update)
mvneta_stop(dev);

67
target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
View File

@ -1,67 +0,0 @@
From 44efc78d0e464ce70b45b165c005f8bedc17952e Mon Sep 17 00:00:00 2001
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Wed, 29 Jan 2020 12:50:53 +0100
Subject: [PATCH] net: mvneta: fix XDP support if sw bm is used as fallback
In order to fix XDP support if sw buffer management is used as fallback
for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between
XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header
to 4-byte boundary.
Fix rx_offset_correction initialization if mvneta_bm_port_init fails in
mvneta_resume routine
Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -326,8 +326,7 @@
ETH_HLEN + ETH_FCS_LEN, \
cache_line_size())
-#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
- NET_IP_ALIGN)
+#define MVNETA_SKB_HEADROOM max(XDP_PACKET_HEADROOM, NET_SKB_PAD)
#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
MVNETA_SKB_HEADROOM))
#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
@@ -1174,6 +1173,7 @@ bm_mtu_err:
mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id);
pp->bm_priv = NULL;
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1);
netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n");
}
@@ -4989,7 +4989,6 @@ static int mvneta_probe(struct platform_
SET_NETDEV_DEV(dev, &pdev->dev);
pp->id = global_port_id++;
- pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
/* Obtain access to BM resources if enabled and already initialized */
bm_node = of_parse_phandle(dn, "buffer-manager", 0);
@@ -5014,6 +5013,10 @@ static int mvneta_probe(struct platform_
}
of_node_put(bm_node);
+ /* sw buffer management */
+ if (!pp->bm_priv)
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
+
err = mvneta_init(&pdev->dev, pp);
if (err < 0)
goto err_netdev;
@@ -5171,6 +5174,7 @@ static int mvneta_resume(struct device *
err = mvneta_bm_port_init(pdev, pp);
if (err < 0) {
dev_info(&pdev->dev, "use SW buffer management\n");
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
pp->bm_priv = NULL;
}
}

60
target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
View File

@ -1,60 +0,0 @@
From 6964494582f56a3882c2c53b0edbfe99eb32b2e1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Thu, 30 Apr 2020 10:06:14 +0200
Subject: [PATCH] PCI: aardvark: Train link immediately after enabling training
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
training and starting link training causes detection issues with some
buggy cards (such as Compex WLE900VX).
Move the code which enables link training immediately before the one
which starts link traning.
This fixes detection issues of Compex WLE900VX card on Turris MOX after
cold boot.
Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -315,11 +315,6 @@ static void advk_pcie_setup_hw(struct ad
reg |= LANE_COUNT_1;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
- /* Enable link training */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg |= LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* Enable MSI */
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
@@ -361,7 +356,15 @@ static void advk_pcie_setup_hw(struct ad
*/
msleep(PCI_PM_D3COLD_WAIT);
- /* Start link training */
+ /* Enable link training */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Start link training immediately after enabling it.
+ * This solves problems for some buggy cards.
+ */
reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
reg |= PCIE_CORE_LINK_TRAINING;
advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);

208
target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
View File

@ -1,208 +0,0 @@
From 43fc679ced18006b12d918d7a8a4af392b7fbfe7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:17 +0200
Subject: [PATCH] PCI: aardvark: Improve link training
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Currently the aardvark driver trains link in PCIe gen2 mode. This may
cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
even not detected. Moreover when ASPM code tries to retrain link second
time, these cards may stop responding and link goes down. If gen1 is
used this does not happen.
Unconditionally forcing gen1 is not a good solution since it may have
performance impact on gen2 cards.
To overcome this, read 'max-link-speed' property (as defined in PCI
device tree bindings) and use this as max gen mode. Then iteratively try
link training at this mode or lower until successful. After successful
link training choose final controller gen based on Negotiated Link Speed
from Link Status register, which should match card speed.
Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++------
1 file changed, 89 insertions(+), 25 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -39,6 +39,7 @@
#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
#define PCIE_CORE_LINK_TRAINING BIT(5)
+#define PCIE_CORE_LINK_SPEED_SHIFT 16
#define PCIE_CORE_LINK_WIDTH_SHIFT 20
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
@@ -206,6 +207,7 @@ struct advk_pcie {
struct mutex msi_used_lock;
u16 msi_msg;
int root_bus_nr;
+ int link_gen;
struct pci_bridge_emul bridge;
};
@@ -230,20 +232,16 @@ static int advk_pcie_link_up(struct advk
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
{
- struct device *dev = &pcie->pdev->dev;
int retries;
/* check if the link is up or not */
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
- if (advk_pcie_link_up(pcie)) {
- dev_info(dev, "link up\n");
+ if (advk_pcie_link_up(pcie))
return 0;
- }
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
}
- dev_err(dev, "link never came up\n");
return -ETIMEDOUT;
}
@@ -258,6 +256,85 @@ static void advk_pcie_wait_for_retrain(s
}
}
+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+{
+ int ret, neg_gen;
+ u32 reg;
+
+ /* Setup link speed */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~PCIE_GEN_SEL_MSK;
+ if (gen == 3)
+ reg |= SPEED_GEN_3;
+ else if (gen == 2)
+ reg |= SPEED_GEN_2;
+ else
+ reg |= SPEED_GEN_1;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Enable link training. This is not needed in every call to this
+ * function, just once suffices, but it does not break anything either.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg |= LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /*
+ * Start link training immediately after enabling it.
+ * This solves problems for some buggy cards.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ reg |= PCIE_CORE_LINK_TRAINING;
+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+
+ ret = advk_pcie_wait_for_link(pcie);
+ if (ret)
+ return ret;
+
+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
+ neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+
+ return neg_gen;
+}
+
+static void advk_pcie_train_link(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ int neg_gen = -1, gen;
+
+ /*
+ * Try link training at link gen specified by device tree property
+ * 'max-link-speed'. If this fails, iteratively train at lower gen.
+ */
+ for (gen = pcie->link_gen; gen > 0; --gen) {
+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
+ if (neg_gen > 0)
+ break;
+ }
+
+ if (neg_gen < 0)
+ goto err;
+
+ /*
+ * After successful training if negotiated gen is lower than requested,
+ * train again on negotiated gen. This solves some stability issues for
+ * some buggy gen1 cards.
+ */
+ if (neg_gen < gen) {
+ gen = neg_gen;
+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
+ }
+
+ if (neg_gen == gen) {
+ dev_info(dev, "link up at gen %i\n", gen);
+ return;
+ }
+
+err:
+ dev_err(dev, "link never came up\n");
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
@@ -303,12 +380,6 @@ static void advk_pcie_setup_hw(struct ad
PCIE_CORE_CTRL2_TD_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- /* Set GEN2 */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~PCIE_GEN_SEL_MSK;
- reg |= SPEED_GEN_2;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* Set lane X1 */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LANE_CNT_MSK;
@@ -356,20 +427,7 @@ static void advk_pcie_setup_hw(struct ad
*/
msleep(PCI_PM_D3COLD_WAIT);
- /* Enable link training */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg |= LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /*
- * Start link training immediately after enabling it.
- * This solves problems for some buggy cards.
- */
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg |= PCIE_CORE_LINK_TRAINING;
- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-
- advk_pcie_wait_for_link(pcie);
+ advk_pcie_train_link(pcie);
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
@@ -1193,6 +1251,12 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ ret = of_pci_get_max_link_speed(dev->of_node);
+ if (ret <= 0 || ret > 3)
+ pcie->link_gen = 3;
+ else
+ pcie->link_gen = ret;
+
advk_pcie_setup_hw(pcie);
ret = advk_sw_pci_bridge_init(pcie);

123
target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
View File

@ -1,123 +0,0 @@
From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Thu, 30 Apr 2020 10:06:18 +0200
Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Add support for issuing PERST via GPIO specified in 'reset-gpios'
property (as described in PCI device tree bindings).
Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
after reboot when PERST is not issued during driver initialization.
If bootloader already enabled link training then issuing PERST has no
effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
not detected. We therefore clear the LINK_TRAINING_EN register before.
It was observed that Compex WLE900VX card needs to be in PERST reset
for at least 10ms if bootloader enabled link training.
Tested on Turris MOX.
Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 43 ++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -9,6 +9,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
@@ -17,6 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
+#include <linux/of_gpio.h>
#include <linux/of_pci.h>
#include "../pci.h"
@@ -209,6 +211,7 @@ struct advk_pcie {
int root_bus_nr;
int link_gen;
struct pci_bridge_emul bridge;
+ struct gpio_desc *reset_gpio;
};
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -335,10 +338,31 @@ err:
dev_err(dev, "link never came up\n");
}
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+ u32 reg;
+
+ if (!pcie->reset_gpio)
+ return;
+
+ /* PERST does not work for some cards when link training is enabled */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* 10ms delay is needed for some cards */
+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ advk_pcie_issue_perst(pcie);
+
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -421,7 +445,8 @@ static void advk_pcie_setup_hw(struct ad
/*
* PERST# signal could have been asserted by pinctrl subsystem before
- * probe() callback has been called, making the endpoint going into
+ * probe() callback has been called or issued explicitly by reset gpio
+ * function advk_pcie_issue_perst(), making the endpoint going into
* fundamental reset. As required by PCI Express spec a delay for at
* least 100ms after such a reset before link training is needed.
*/
@@ -1251,6 +1276,22 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
+ "reset-gpios", 0,
+ GPIOD_OUT_LOW,
+ "pcie1-reset");
+ ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
+ if (ret) {
+ if (ret == -ENOENT) {
+ pcie->reset_gpio = NULL;
+ } else {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get reset-gpio: %i\n",
+ ret);
+ return ret;
+ }
+ }
+
ret = of_pci_get_max_link_speed(dev->of_node);
if (ret <= 0 || ret > 3)
pcie->link_gen = 3;

152
target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
View File

@ -1,152 +0,0 @@
From 366697018c9a2aa67d457bfdc495115cface6ae8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:20 +0200
Subject: [PATCH] PCI: aardvark: Add PHY support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
With recent proposed changes for U-Boot it is possible that bootloader
won't initialize the PHY for this controller (currently the PHY is
initialized regardless whether PCI is used in U-Boot, but with these
proposed changes the PHY is initialized only on request).
Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
PCIe PHY, and since Linux' functionality should be independent on what
bootloader did, add code for enabling generic PHY if found in device OF
node.
The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
Instead ARM Trusted Firmware expects PCIe driver to do this step,
probably because the register is in PCIe controller address space,
instead of PHY address space. We therefore add this step into the
advk_pcie_setup_hw function.
[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836
Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_gpio.h>
@@ -104,6 +105,8 @@
#define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
#define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6)
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
+#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
+#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
#define PCIE_MSG_PM_PME_MASK BIT(7)
@@ -212,6 +215,7 @@ struct advk_pcie {
int link_gen;
struct pci_bridge_emul bridge;
struct gpio_desc *reset_gpio;
+ struct phy *phy;
};
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
@@ -363,6 +367,11 @@ static void advk_pcie_setup_hw(struct ad
advk_pcie_issue_perst(pcie);
+ /* Enable TX */
+ reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
+ reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
+
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -1241,6 +1250,62 @@ out_release_res:
return err;
}
+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
+{
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+}
+
+static int advk_pcie_enable_phy(struct advk_pcie *pcie)
+{
+ int ret;
+
+ if (!pcie->phy)
+ return 0;
+
+ ret = phy_init(pcie->phy);
+ if (ret)
+ return ret;
+
+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+ if (ret) {
+ phy_exit(pcie->phy);
+ return ret;
+ }
+
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ phy_exit(pcie->phy);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int advk_pcie_setup_phy(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+ struct device_node *node = dev->of_node;
+ int ret = 0;
+
+ pcie->phy = devm_of_phy_get(dev, node, NULL);
+ if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
+ return PTR_ERR(pcie->phy);
+
+ /* Old bindings miss the PHY handle */
+ if (IS_ERR(pcie->phy)) {
+ dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy));
+ pcie->phy = NULL;
+ return 0;
+ }
+
+ ret = advk_pcie_enable_phy(pcie);
+ if (ret)
+ dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
+
+ return ret;
+}
+
static int advk_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1298,6 +1363,10 @@ static int advk_pcie_probe(struct platfo
else
pcie->link_gen = ret;
+ ret = advk_pcie_setup_phy(pcie);
+ if (ret)
+ return ret;
+
advk_pcie_setup_hw(pcie);
ret = advk_sw_pci_bridge_init(pcie);

93
target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
View File

@ -1,93 +0,0 @@
From 715878016984b2617f6c1f177c50039e12e7bd5b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:23 +0200
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio
function
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
We found out that we are unable to control the PERST# signal via the
default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
value of this register does not change the pin output when measuring
with voltmeter.
We do not know if this is a bug in the SOC, or if it works only when
PCIe controller is in a certain state.
Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
before training link") says that when this pin changes pinctrl mode
from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
moment.
So currently the situation is that on A3700 boards the PERST# signal is
asserted in U-Boot (because the code in U-Boot issues reset via this pin
via GPIO mode), and then in Linux by the obscure and undocumented
mechanism described by the above mentioned commit.
We want to issue PERST# signal in a known way, therefore this patch
changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
reset-gpios property to the PCIe node in device tree files of
EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
has this property and uDPU does not have a PCIe port).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Remi Pommarel <repk@triplefau.lt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 3 +++
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 +
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 4 ----
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -128,6 +128,9 @@
/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -59,6 +59,7 @@
phys = <&comphy1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
};
/* J6 */
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -127,10 +127,6 @@
};
};
-&pcie_reset_pins {
- function = "gpio";
-};
-
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -318,7 +318,7 @@
pcie_reset_pins: pcie-reset-pins {
groups = "pcie1";
- function = "pcie";
+ function = "gpio";
};
pcie_clkreq_pins: pcie-clkreq-pins {

57
target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
View File

@ -1,57 +0,0 @@
From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
Date: Thu, 30 Apr 2020 10:06:24 +0200
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
property
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Move the comphy handle property of the PCIe node from board specific
device tree files (EspressoBin and Turris Mox) to the generic
armada-37xx.dtsi.
This is correct since this is the only possible PCIe PHY configuration
on Armada 37xx, so when PCIe is enabled on any board, this handle is
correct.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
3 files changed, 1 insertion(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -56,7 +56,6 @@
/* J9 */
&pcie0 {
status = "okay";
- phys = <&comphy1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -133,7 +133,6 @@
status = "okay";
max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- phys = <&comphy1 0>;
/*
* U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
* contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -501,6 +501,7 @@
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;

44
target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
View File

@ -1,44 +0,0 @@
From 1b5a2dd9e266d78d5fddd7e6b116e47ba9577b5e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Thu, 30 Apr 2020 10:06:25 +0200
Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed
property
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Move the max-link-speed property of the PCIe node from board specific
device tree files to the generic armada-37xx.dtsi.
Armada 37xx supports only PCIe gen2 speed so max-link-speed property
should be in the generic armada-37xx.dtsi file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -131,7 +131,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
status = "okay";
- max-link-speed = <2>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
/*
* U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -501,6 +501,7 @@
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
+ max-link-speed = <2>;
phys = <&comphy1 0>;
pcie_intc: interrupt-controller {
interrupt-controller;

53
target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
View File

@ -1,53 +0,0 @@
From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 6 May 2020 10:40:37 +0100
Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../boot/dts/marvell/armada-3720-uDPU.dts | 22 +++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -117,18 +117,36 @@
};
};
+&pinctrl_nb {
+ i2c1_recovery_pins: i2c1-recovery-pins {
+ groups = "i2c1";
+ function = "gpio";
+ };
+
+ i2c2_recovery_pins: i2c2-recovery-pins {
+ groups = "i2c2";
+ function = "gpio";
+ };
+};
+
&i2c0 {
status = "okay";
- pinctrl-names = "default";
+ pinctrl-names = "default", "recovery";
pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&i2c1_recovery_pins>;
/delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c1 {
status = "okay";
- pinctrl-names = "default";
+ pinctrl-names = "default", "recovery";
pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&i2c2_recovery_pins>;
/delete-property/mrvl,i2c-fast-mode;
+ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
lm75@48 {
status = "okay";

50
target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
View File

@ -1,50 +0,0 @@
From 70e380250c3621c55ff218cbaf2272830d9dbb1d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Thu, 2 Jul 2020 10:30:36 +0200
Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card
connected
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
When there is no PCIe card connected and advk_pcie_rd_conf() or
advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
root bridge, the aardvark driver throws the following error message:
advk-pcie d0070000.pcie: config read/write timed out
Obviously accessing PCIe registers of disconnected card is not possible.
Extend check in advk_pcie_valid_device() function for validating
availability of PCIe bus. If PCIe link is down, then the device is marked
as Not Found and the driver does not try to access these registers.
This is just an optimization to prevent accessing PCIe registers when card
is disconnected. Trying to access PCIe registers of disconnected card does
not cause any crash, kernel just needs to wait for a timeout. So if card
disappear immediately after checking for PCIe link (before accessing PCIe
registers), it does not cause any problems.
Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/pci/controller/pci-aardvark.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -725,6 +725,13 @@ static bool advk_pcie_valid_device(struc
if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
return false;
+ /*
+ * If the link goes down after we check for link-up, nothing bad
+ * happens but the config access times out.
+ */
+ if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+ return false;
+
return true;
}

207
target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
View File

@ -1,207 +0,0 @@
From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu@gmail.com>
Date: Wed, 15 Jul 2020 15:35:14 +0200
Subject: [PATCH] power: reset: add driver for LinkStation power off
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some Buffalo LinkStations perform the power off operation, at restart
time, depending on the state of an output pin (LED2/INTn) at the ethernet
PHY. This pin is also used to wake the machine when a WoL packet is
received by the PHY.
The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU),
and other models. Without it, the board remains forever halted if a
power off command is executed, unless the PSU is disconnected and
connected again.
Add the driver to provide the power off function and also make the WoL
feature to be available.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/power/reset/Kconfig | 11 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/linkstation-poweroff.c | 136 +++++++++++++++++++++
3 files changed, 148 insertions(+)
create mode 100644 drivers/power/reset/linkstation-poweroff.c
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -99,6 +99,17 @@ config POWER_RESET_HISI
help
Reboot support for Hisilicon boards.
+config POWER_RESET_LINKSTATION
+ tristate "Buffalo LinkStation power-off driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF_MDIO && PHYLIB
+ help
+ This driver supports turning off some Buffalo LinkStations by
+ setting an output pin at the ethernet PHY to the correct state.
+ It also makes the device compatible with the WoL function.
+
+ Say Y here if you have a Buffalo LinkStation LS421D/E.
+
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on ARCH_QCOM
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
--- /dev/null
+++ b/drivers/power/reset/linkstation-poweroff.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LinkStation power off restart driver
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+#include <linux/phy.h>
+
+/* Defines from the eth phy Marvell driver */
+#define MII_MARVELL_COPPER_PAGE 0
+#define MII_MARVELL_LED_PAGE 3
+#define MII_MARVELL_WOL_PAGE 17
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MII_PHY_LED_CTRL 16
+#define MII_88E1318S_PHY_LED_TCR 18
+#define MII_88E1318S_PHY_WOL_CTRL 16
+#define MII_M1011_IEVENT 19
+
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
+#define LED2_FORCE_ON (0x8 << 8)
+#define LEDMASK GENMASK(11,8)
+
+static struct phy_device *phydev;
+
+static void mvphy_reg_intn(u16 data)
+{
+ int rc = 0, saved_page;
+
+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
+ if (saved_page < 0)
+ goto err;
+
+ /* Force manual LED2 control to let INTn work */
+ __phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
+
+ /* Set the LED[2]/INTn pin to the required state */
+ __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
+ MII_88E1318S_PHY_LED_TCR_FORCE_INT,
+ MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
+
+ if (!data) {
+ /* Clear interrupts to ensure INTn won't be holded in high state */
+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
+ __phy_read(phydev, MII_M1011_IEVENT);
+
+ /* If WOL was enabled and a magic packet was received before powering
+ * off, we won't be able to wake up by sending another magic packet.
+ * Clear WOL status.
+ */
+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+ }
+err:
+ rc = phy_restore_page(phydev, saved_page, rc);
+ if (rc < 0)
+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
+
+ if (!data) {
+ /* Slow down the PHY to save energy */
+ rc= phy_speed_down(phydev, false);
+ if (rc < 0)
+ dev_err(&phydev->mdio.dev, "PHY speed down failed, %d\n", rc);
+ }
+}
+
+static int linkstation_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ if (action == SYS_RESTART)
+ mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block linkstation_reboot_nb = {
+ .notifier_call = linkstation_reboot_notifier,
+};
+
+static void linkstation_poweroff(void)
+{
+ unregister_reboot_notifier(&linkstation_reboot_nb);
+ mvphy_reg_intn(0);
+
+ kernel_restart("Power off");
+}
+
+static const struct of_device_id ls_poweroff_of_match[] = {
+ { .compatible = "buffalo,ls421d" },
+ { .compatible = "buffalo,ls421de" },
+ { },
+};
+
+static int __init linkstation_poweroff_init(void)
+{
+ struct mii_bus *bus;
+ struct device_node *dn;
+
+ dn = of_find_matching_node(NULL, ls_poweroff_of_match);
+ if (!dn)
+ return -ENODEV;
+ of_node_put(dn);
+
+ dn = of_find_node_by_name(NULL, "mdio");
+ if (!dn)
+ return -ENODEV;
+
+ bus = of_mdio_find_bus(dn);
+ of_node_put(dn);
+ if (!bus)
+ return -EPROBE_DEFER;
+
+ phydev = phy_find_first(bus);
+ if (!phydev)
+ return -EPROBE_DEFER;
+
+ register_reboot_notifier(&linkstation_reboot_nb);
+ pm_power_off = linkstation_poweroff;
+
+ pr_info("LinkStation power off driver registered\n");
+ return 0;
+}
+
+static void __exit linkstation_poweroff_exit(void)
+{
+ pm_power_off = NULL;
+ unregister_reboot_notifier(&linkstation_reboot_nb);
+}
+
+module_init(linkstation_poweroff_init);
+module_exit(linkstation_poweroff_exit);
+
+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
+MODULE_DESCRIPTION("LinkStation power off driver");
+MODULE_LICENSE("GPL v2");

44
target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
View File

@ -1,44 +0,0 @@
From b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Wed, 2 Sep 2020 16:43:44 +0200
Subject: [PATCH] PCI: aardvark: Fix initialization with old Marvell's Arm
Trusted Firmware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Old ATF automatically power on pcie phy and does not provide SMC call for
phy power on functionality which leads to aardvark initialization failure:
[ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
[ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95
[ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95)
[ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95
This patch fixes above failure by ignoring 'not supported' error in
aardvark driver. In this case it is expected that phy is already power on.
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org
Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1281,7 +1281,9 @@ static int advk_pcie_enable_phy(struct a
}
ret = phy_power_on(pcie->phy);
- if (ret) {
+ if (ret == -EOPNOTSUPP) {
+ dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
+ } else if (ret) {
phy_exit(pcie->phy);
return ret;
}

88
target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
View File

@ -1,88 +0,0 @@
From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Mon, 7 Sep 2020 13:27:17 +0200
Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Espressobin boards have 3 ethernet ports and some of them got assigned more
then one MAC address. MAC addresses are stored in U-Boot environment.
Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave
device") kernel can use MAC addresses from DT for particular DSA port.
Currently Espressobin DTS file contains alias just for ethernet0.
This patch defines additional ethernet aliases in Espressobin DTS files, so
bootloader can fill correct MAC address for DSA switch ports if more MAC
addresses were specified.
DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
are used for lan ports for both Espressobin revisions (V5 and V7).
Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
Cc: <stable@vger.kernel.org> # a2c7023f7075c: dsa: read mac address
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../dts/marvell/armada-3720-espressobin-v7-emmc.dts | 10 ++++++++--
.../boot/dts/marvell/armada-3720-espressobin-v7.dts | 10 ++++++++--
3 files changed, 24 insertions(+), 8 deletions(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -15,16 +15,22 @@
compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
"globalscale,espressobin", "marvell,armada3720",
"marvell,armada3710";
+
+ aliases {
+ /* ethernet1 is wan port */
+ ethernet1 = &switch0port3;
+ ethernet3 = &switch0port1;
+ };
};
&ports {
- port@1 {
+ switch0port1: port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
- port@3 {
+ switch0port3: port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -14,16 +14,22 @@
model = "Globalscale Marvell ESPRESSOBin Board V7";
compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
"marvell,armada3720", "marvell,armada3710";
+
+ aliases {
+ /* ethernet1 is wan port */
+ ethernet1 = &switch0port3;
+ ethernet3 = &switch0port1;
+ };
};
&ports {
- port@1 {
+ switch0port1: port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&switch0phy0>;
};
- port@3 {
+ switch0port3: port@3 {
reg = <3>;
label = "wan";
phy-handle = <&switch0phy2>;

65
target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
View File

@ -1,65 +0,0 @@
From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
From: Tomasz Maciej Nowak <tmn505@gmail.com>
Date: Tue, 10 Nov 2020 16:38:31 +0100
Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
With board revision 1.3, SolidRun moved the power LED to the middle of
the board. In old place of power LED a GPIO controllable heartbeat LED
was added. This commit only touches Single Shot variant, since only this
variant is all revision 1.3.
Note:
This is slightly modified patch. Some boards could be placed in an
enclosure, so the LED18 is enabled by default, since that'll be the only
visible indicator that the board is operating.
Reported-by: Alexandra Alth <alexandra@alth.de>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -5,6 +5,8 @@
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
*/
+#include <dt-bindings/leds/common.h>
+
#include "armada-8040-mcbin.dtsi"
/ {
@@ -12,6 +14,20 @@
compatible = "marvell,armada8040-mcbin-singleshot",
"marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cp0_led18_pins>;
+ pinctrl-names = "default";
+
+ led18 {
+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
};
&cp0_eth0 {
@@ -27,3 +43,10 @@
managed = "in-band-status";
sfp = <&sfp_eth1>;
};
+
+&cp0_pinctrl {
+ cp0_led18_pins: led18-pins {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+};

74
target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
View File

@ -1,74 +0,0 @@
From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Sun, 15 Nov 2020 14:59:17 +0100
Subject: ARM: dts: turris-omnia: enable HW buffer management
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The buffer manager is available on Turris Omnia but needs to be
described in device-tree to be used.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -84,12 +84,23 @@
};
};
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
+};
+
/* Connected to 88E6176 switch, port 6 */
&eth0 {
pinctrl-names = "default";
pinctrl-0 = <&ge0_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@@ -103,6 +114,9 @@
pinctrl-0 = <&ge1_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@@ -115,6 +129,9 @@
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
&i2c0 {

37
target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
View File

@ -1,37 +0,0 @@
From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Sun, 15 Nov 2020 14:59:18 +0100
Subject: ARM: dts: turris-omnia: add comphy handle to eth2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
be able to switch between 1G and 2.5G modes the comphy link has to be
defined.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -129,6 +129,7 @@
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;
+ phys = <&comphy5 2>;
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;

61
target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
View File

@ -1,61 +0,0 @@
From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Sun, 15 Nov 2020 14:59:19 +0100
Subject: ARM: dts: turris-omnia: describe switch interrupt
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Describe switch interrupt for Turris Omnia so that the CPU does not have
to poll the switch. We also need to to set mpp45 pin to gpio function
for this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -261,13 +261,18 @@
/* Switch MV88E6176 at address 0x10 */
switch@10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
- dsa,member = <0 0>;
+ dsa,member = <0 0>;
reg = <0x10>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -320,6 +325,11 @@
marvell,function = "gpio";
};
+ swint_pins: swint-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
spi0cs0_pins: spi0cs0-pins {
marvell,pins = "mpp25";
marvell,function = "spi0";

90
target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
View File

@ -1,90 +0,0 @@
From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Mon, 16 Nov 2020 13:24:22 +0100
Subject: ARM: dts: turris-omnia: add SFP node
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Turris Omnia has an SFP cage that, together with WAN PHY, is connected
to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
the multiplexor switches the SerDes signal from PHY to SFP.
Describe the SFP cage, but leave it disabled. Until phylink has support
for such configuration, we are leaving it to U-Boot to enable SFP and
disable WAN PHY at boot time depending on whether a SFP module is
present.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -82,6 +82,24 @@
};
};
};
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_i2c>;
+ tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <3000>;
+
+ /*
+ * For now this has to be enabled at boot time by U-Boot when
+ * a SFP module is present. Read more in the comment in the
+ * eth2 node below.
+ */
+ status = "disabled";
+ };
};
&bm {
@@ -126,10 +144,20 @@
/* WAN port */
&eth2 {
+ /*
+ * eth2 is connected via a multiplexor to both the SFP cage and to
+ * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+ * a SFP module is present, as determined by the mode-def0 GPIO.
+ *
+ * Until kernel supports this configuration properly, in case SFP module
+ * is present, U-Boot has to enable the sfp node above, remove phy
+ * handle and add managed = "in-band-status" property.
+ */
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;
phys = <&comphy5 2>;
+ sfp = <&sfp>;
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
@@ -195,7 +223,7 @@
/* routed to PCIe2 connector (CN62A) */
};
- i2c@4 {
+ sfp_i2c: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;

52
target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
View File

@ -1,52 +0,0 @@
From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Sun, 15 Nov 2020 14:59:22 +0100
Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.
Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
incorrect according to device-tree bindings documentation.
Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
needed. Kernel can read the PHY identifier itself.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -155,7 +155,7 @@
*/
status = "okay";
phy-mode = "sgmii";
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phys = <&comphy5 2>;
sfp = <&sfp>;
buffer-manager = <&bm>;
@@ -278,9 +278,9 @@
pinctrl-0 = <&mdio_pins>;
status = "okay";
- phy1: phy@1 {
+ phy1: ethernet-phy@1 {
status = "okay";
- compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
marvell,reg-init = <3 18 0 0x4985>;

33
target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
View File

@ -1,33 +0,0 @@
From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001
From: Rui Salvaterra <rsalvaterra@gmail.com>
Date: Wed, 17 Feb 2021 15:30:38 +0000
Subject: ARM: dts: turris-omnia: fix hardware buffer management
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Hardware buffer management has never worked on the Turris Omnia, as the
required MBus window hadn't been reserved. Fix thusly.
Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -31,7 +31,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {

208
target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
View File

@ -1,208 +0,0 @@
From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
From: Adrian Panella <ianchi74@outlook.com>
Date: Thu, 9 Mar 2017 09:37:17 +0100
Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
This patch has been modified to be mvebu specific. The original patch
did not pass the bootloader cmdline on if no append-rootblock stanza
was found, resulting in blank cmdline and failure to boot.
Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
---
arch/arm/Kconfig | 11 ++++
arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
init/main.c | 16 +++++
3 files changed, 111 insertions(+), 1 deletion(-)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to a new device tree property: bootloader-args.
+ If there is a property "append-rootblock" in DT under /chosen
+ and a root= option in bootloaders command line it will be parsed
+ and added to DT bootargs with the form: <append-rootblock>XX.
+ Only command line ATAG will be processed, the rest of the ATAGs
+ sent by bootloader will be ignored.
+
endchoice
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -4,6 +4,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
#endif
@@ -67,6 +69,72 @@ static uint32_t get_cell_size(const void
return cell_size;
}
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
+{
+ char *ptr, *end;
+ char *root="root=";
+ int i, l;
+ const char *rootblock;
+
+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
+ ptr = str - 1;
+
+ do {
+ //first find an 'r' at the begining or after a space
+ do {
+ ptr++;
+ ptr = strchr(ptr, 'r');
+ if (!ptr)
+ goto no_append;
+
+ } while (ptr != str && *(ptr-1) != ' ');
+
+ //then check for the rest
+ for(i = 1; i <= 4; i++)
+ if(*(ptr+i) != *(root+i)) break;
+
+ } while (i != 5);
+
+ end = strchr(ptr, ' ');
+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
+
+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
+ ptr = end + 1;
+
+ /* if append-rootblock property is set use it to append to command line */
+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
+ if (rootblock == NULL)
+ goto no_append;
+
+ if (*dest != ' ') {
+ *dest = ' ';
+ dest++;
+ len++;
+ }
+
+ if (len + l + i <= COMMAND_LINE_SIZE) {
+ memcpy(dest, rootblock, l);
+ dest += l - 1;
+ memcpy(dest, ptr, i);
+ dest += i;
+ }
+
+ return dest;
+
+no_append:
+ len = strlen(str);
+ if (len + 1 < COMMAND_LINE_SIZE) {
+ memcpy(dest, str, len);
+ dest += len;
+ }
+
+ return dest;
+}
+#endif
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
@@ -86,12 +154,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //save original bootloader args
+ //and append ubi.mtd with root partition number to current cmdline
+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+
+#else
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
+#endif
}
*ptr = '\0';
@@ -166,7 +243,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ }
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
@@ -210,6 +289,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
+#else
+
+ }
+#endif
return fdt_pack(fdt);
}
--- a/init/main.c
+++ b/init/main.c
@@ -104,6 +104,10 @@
#define CREATE_TRACE_POINTS
#include <trace/events/initcall.h>
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#include <linux/of.h>
+#endif
+
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -631,6 +635,18 @@ asmlinkage __visible void __init start_k
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //Show bootloader's original command line for reference
+ if(of_chosen) {
+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
+ if(prop)
+ pr_notice("Bootloader command line (ignored): %s\n", prop);
+ else
+ pr_notice("Bootloader command line not present\n");
+ }
+#endif
+
/* parameters may set static keys */
jump_label_init();
parse_early_param();

10
target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -69,6 +69,7 @@ config MACH_ARMADA_38X
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
+ select ARCH_WANT_LIBATA_LEDS
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.

770
target/linux/mvebu/patches-5.4/302-add_powertables.patch
View File

@ -1,770 +0,0 @@
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -212,11 +212,19 @@
&pcie1 {
/* Marvell 88W8864, 5GHz-only */
status = "okay";
+
+ mwlwifi {
+ marvell,2ghz = <0>;
+ };
};
&pcie2 {
/* Marvell 88W8864, 2GHz-only */
status = "okay";
+
+ mwlwifi {
+ marvell,5ghz = <0>;
+ };
};
&pinctrl {
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -142,3 +142,205 @@
};
};
};
+
+&pcie1 {
+ mwlwifi {
+ marvell,chainmask = <2 2>;
+ marvell,powertable {
+ AU =
+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
+ CA =
+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
+ CN =
+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
+ ETSI =
+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
+ FCC =
+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
+ };
+ };
+};
+
+&pcie2 {
+ mwlwifi {
+ marvell,chainmask = <2 2>;
+ marvell,powertable {
+ AU =
+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
+ CA =
+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
+ CN =
+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
+ ETSI =
+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
+ FCC =
+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -142,3 +142,205 @@
};
};
};
+
+&pcie1 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ AU =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
+ CA =
+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
+ CN =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
+ ETSI =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
+ FCC =
+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
+ };
+ };
+};
+
+&pcie2 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ AU =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ CA =
+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
+ CN =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ ETSI =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ FCC =
+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -142,3 +142,205 @@
};
};
};
+
+&pcie1 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ AU =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
+ CA =
+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
+ CN =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
+ ETSI =
+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
+ FCC =
+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
+ };
+ };
+};
+
+&pcie2 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ AU =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ CA =
+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
+ CN =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ ETSI =
+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
+ FCC =
+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
+ };
+ };
+};
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -157,6 +157,18 @@
};
};
+&pcie1 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+};
+
+&pcie2 {
+ mwlwifi {
+ marvell,chainmask = <4 4>;
+ };
+};
+
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -225,12 +225,100 @@
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
+
+ mwlwifi {
+ marvell,5ghz = <0>;
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ FCC =
+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
+
+ ETSI =
+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
+ };
+ };
};
/* Second mini-PCIe port */
pcie@3,0 {
/* Port 0, Lane 3 */
status = "okay";
+
+ mwlwifi {
+ marvell,2ghz = <0>;
+ marvell,chainmask = <4 4>;
+ marvell,powertable {
+ FCC =
+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
+
+ ETSI =
+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
+ };
+ };
};
};

17
target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
View File

@ -1,17 +0,0 @@
Newer Linksys boards might come with a Winbond W29N02GV which can be
configured in different ways. Make sure we configure it the same way
as the older chips so everything keeps working.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -148,6 +148,8 @@
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
marvell,nand-keep-config;
nand-on-flash-bbt;
};

15
target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
View File

@ -1,15 +0,0 @@
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -237,12 +237,10 @@
};
&i2c0 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
};
&i2c1 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11100 0x100>;
};

19
target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
View File

@ -1,19 +0,0 @@
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -103,6 +103,16 @@
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0 0x400000>;
+ };
+
+ partition@1 {
+ label = "firmware";
+ reg = <0x400000 0xc00000>;
+ };
};
};

35
target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
View File

@ -1,35 +0,0 @@
From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 13 Jan 2015 11:14:09 +0100
Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -218,19 +218,19 @@
#size-cells = <1>;
partition@0 {
- label = "U-Boot";
+ label = "u-boot";
reg = <0x00000000 0x00800000>;
read-only;
};
partition@800000 {
- label = "uImage";
+ label = "kernel";
reg = <0x00800000 0x00400000>;
read-only;
};
partition@c00000 {
- label = "Root";
+ label = "ubi";
reg = <0x00c00000 0x3f400000>;
};
};

10
target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -485,3 +485,7 @@
};
};
};
+
+&coherencyfab {
+ broken-idle;
+};

11
target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
View File

@ -1,11 +0,0 @@
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -387,7 +387,7 @@
port@4 {
reg = <4>;
- label = "internet";
+ label = "wan";
};
port@5 {

50
target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
View File

@ -1,50 +0,0 @@
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -14,6 +14,13 @@
compatible = "linksys,armada385", "marvell,armada385",
"marvell,armada380";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -71,7 +78,7 @@
pinctrl-0 = <&gpio_leds_pins>;
pinctrl-names = "default";
- power {
+ led_power: power {
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -26,6 +26,13 @@
compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
"marvell,armadaxp", "marvell,armada-370-xp";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
@@ -197,7 +204,7 @@
pinctrl-0 = <&power_led_pin>;
pinctrl-names = "default";
- power {
+ led_power: power {
label = "mamba:white:power";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
default-state = "on";

25
target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
View File

@ -1,25 +0,0 @@
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -116,7 +116,7 @@
};
&eth2 {
- status = "okay";
+ status = "disabled";
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
@@ -200,10 +200,10 @@
label = "wan";
};
- port@5 {
- reg = <5>;
+ port@6 {
+ reg = <6>;
label = "cpu";
- ethernet = <&eth2>;
+ ethernet = <&eth0>;
fixed-link {
speed = <1000>;

68
target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
View File

@ -1,68 +0,0 @@
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -12,8 +12,8 @@
/ {
model = "Linksys WRT3200ACM";
- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
+ compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
+ "marvell,armada385", "marvell,armada380";
};
&expander0 {
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -22,9 +22,10 @@
#include "armada-xp-mv78230.dtsi"
/ {
- model = "Linksys WRT1900AC";
- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- "marvell,armadaxp", "marvell,armada-370-xp";
+ model = "Linksys WRT1900AC v1";
+ compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
+ "marvell,armadaxp-mv78230", "marvell,armadaxp",
+ "marvell,armada-370-xp";
aliases {
led-boot = &led_power;
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -9,8 +9,9 @@
#include "armada-385-linksys.dtsi"
/ {
- model = "Linksys WRT1900ACv2";
- compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+ model = "Linksys WRT1900AC v2";
+ compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
+ "linksys,armada385", "marvell,armada385",
"marvell,armada380";
};
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -10,8 +10,8 @@
/ {
model = "Linksys WRT1200AC";
- compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
+ compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
+ "marvell,armada385", "marvell,armada380";
};
&expander0 {
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -10,7 +10,8 @@
/ {
model = "Linksys WRT1900ACS";
- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+ compatible = "linksys,wrt1900acs", "linksys,shelby",
+ "linksys,armada385", "marvell,armada385",
"marvell,armada380";
};

87
target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
View File

@ -1,87 +0,0 @@
From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 29 Nov 2016 10:15:45 +0000
Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 +
.../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++
2 files changed, 63 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "armada-388-clearfog.dtsi"
+#include "armada-38x-solidrun-microsom-emmc.dtsi"
/ {
model = "SolidRun Clearfog Base A1";
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/ {
+ soc {
+ internal-regs {
+ sdhci@d8000 {
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ pinctrl-0 = <&microsom_sdhci_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ wp-inverted;
+ };
+ };
+ };
+};

25
target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
View File

@ -1,25 +0,0 @@
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -24,6 +24,10 @@
aliases {
/* So that mvebu u-boot can update the MAC addresses */
ethernet1 = &eth0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
};
chosen {
@@ -73,10 +77,9 @@
pinctrl-names = "default";
pinctrl-0 = <&helios_system_led_pins>;
- status-led {
+ led_status: status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
default-state = "on";
};

20
target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
View File

@ -1,20 +0,0 @@
From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Tue, 4 Jul 2017 19:25:28 -0600
Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -18,6 +18,7 @@
#size-cells = <2>;
aliases {
+ ethernet0 = &eth0;
serial0 = &uart0;
serial1 = &uart1;
};

26
target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
View File

@ -1,26 +0,0 @@
From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001
From: Tomasz Maciej Nowak <tmn505@gmail.com>
Date: Tue, 9 Apr 2019 15:53:42 +0200
Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
phandle
Instead of referencing the whole mdio node, add ports phandle to adjust
port labels in dts for different hardware iterations of ESPRESSObin
boards.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
---
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -147,7 +147,7 @@
dsa,member = <0 0>;
- ports {
+ ports: ports {
#address-cells = <1>;
#size-cells = <0>;

34
target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
View File

@ -1,34 +0,0 @@
Certain SFP modules (most notably Nokia GPON ones) first check
connectivity on 1000base-x, and switch to 2500base-x afterwards. This
is considered a quirk so the phylink switches the interface to
2500base-x as well.
However, after power-cycling the uDPU device, network interface/SFP module
will not work correctly until the module is re-seated. This patch
resolves this issue by forcing the interface to be brought up in
2500base-x mode by default.
Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -162,7 +162,7 @@
};
&eth0 {
- phy-mode = "sgmii";
+ phy-mode = "2500base-x";
status = "okay";
managed = "in-band-status";
phys = <&comphy1 0>;
@@ -170,7 +170,7 @@
};
&eth1 {
- phy-mode = "sgmii";
+ phy-mode = "2500base-x";
status = "okay";
managed = "in-band-status";
phys = <&comphy0 1>;

37
target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
View File

@ -1,37 +0,0 @@
From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
From: Tad <tad@spotco.us>
Date: Fri, 5 Feb 2021 22:32:11 -0500
Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
partition to 4MB
Signed-off-by: Tad Davanzo <tad@spotco.us>
---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -456,9 +456,9 @@
reg = <0xa00000 0x2800000>; /* 40MB */
};
- partition@d00000 {
+ partition@e00000 {
label = "rootfs1";
- reg = <0xd00000 0x2500000>; /* 37MB */
+ reg = <0xe00000 0x2400000>; /* 36MB */
};
/* kernel2 overlaps with rootfs2 by design */
@@ -467,9 +467,9 @@
reg = <0x3200000 0x2800000>; /* 40MB */
};
- partition@3500000 {
+ partition@3600000 {
label = "rootfs2";
- reg = <0x3500000 0x2500000>; /* 37MB */
+ reg = <0x3600000 0x2400000>; /* 36MB */
};
/*

29
target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
View File

@ -1,29 +0,0 @@
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -234,7 +234,7 @@
clocks = <&gateclk 23>;
clock-names = "cesa0";
marvell,crypto-srams = <&crypto_sram>;
- marvell,crypto-sram-size = <0x7e0>;
+ marvell,crypto-sram-size = <0x800>;
};
};
@@ -255,12 +255,17 @@
* cpuidle workaround.
*/
idle-sram@0 {
+ status = "disabled";
reg = <0x0 0x20>;
};
};
};
};
+&coherencyfab {
+ broken-idle;
+};
+
/*
* Default UART pinctrl setting without RTS/CTS, can be overwritten on
* board level if a different configuration is used.

60
target/linux/mvebu/patches-5.4/400-find_active_root.patch
View File

@ -1,60 +0,0 @@
The WRT1900AC among other Linksys routers uses a dual-firmware layout.
Dynamically rename the active partition to "ubi".
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
--- a/drivers/mtd/parsers/ofpart_core.c
+++ b/drivers/mtd/parsers/ofpart_core.c
@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
return of_get_property(pp, "compatible", NULL);
}
+static int mangled_rootblock;
+
static int parse_fixed_partitions(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
struct device_node *mtd_node;
struct device_node *ofpart_node;
const char *partname;
+ const char *owrtpart = "ubi";
struct device_node *pp;
int nr_parts, i, ret = 0;
bool dedicated = true;
@@ -133,9 +136,13 @@ static int parse_fixed_partitions(struct
parts[i].size = of_read_number(reg + a_cells, s_cells);
parts[i].of_node = pp;
- partname = of_get_property(pp, "label", &len);
- if (!partname)
- partname = of_get_property(pp, "name", &len);
+ if (mangled_rootblock && (i == mangled_rootblock)) {
+ partname = owrtpart;
+ } else {
+ partname = of_get_property(pp, "label", &len);
+ if (!partname)
+ partname = of_get_property(pp, "name", &len);
+ }
parts[i].name = partname;
if (of_get_property(pp, "read-only", &len))
@@ -249,6 +256,18 @@ static int __init ofpart_parser_init(voi
return 0;
}
+static int __init active_root(char *str)
+{
+ get_option(&str, &mangled_rootblock);
+
+ if (!mangled_rootblock)
+ return 1;
+
+ return 1;
+}
+
+__setup("mangled_rootblock=", active_root);
+
static void __exit ofpart_parser_exit(void)
{
deregister_mtd_parser(&ofpart_parser);

38
target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
View File

@ -1,38 +0,0 @@
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.
Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4691,6 +4691,16 @@ static int mvneta_ethtool_set_eee(struct
return phylink_ethtool_set_eee(pp->phylink, eee);
}
+#ifndef CONFIG_ARM64
+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
+ struct net_device *sb_dev)
+{
+ /* XXX: hardware queue scheduling is broken,
+ * use only one queue until it is fixed */
+ return 0;
+}
+#endif
+
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
@@ -4701,6 +4711,9 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,
+#ifndef CONFIG_ARM64
+ .ndo_select_queue = mvneta_select_queue,
+#endif
.ndo_bpf = mvneta_xdp,
.ndo_xdp_xmit = mvneta_xdp_xmit,
};

40
target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
View File

@ -1,40 +0,0 @@
From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 3 Oct 2015 09:13:05 +0100
Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
The cpuidle ->enter method expects the return value to be the sleep
state we entered. Returning negative numbers or other codes is not
permissible since coupled CPU idle was merged.
At least some of the mvebu_v7_cpu_suspend() implementations return the
value from cpu_suspend(), which returns zero if the CPU vectors back
into the kernel via cpu_resume() (the success case), or the non-zero
return value of the suspend actor, or one (failure cases).
We do not want to be returning the failure case value back to CPU idle
as that indicates that we successfully entered one of the deeper idle
states. Always return zero instead, indicating that we slept for the
shortest amount of time.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/cpuidle/cpuidle-mvebu-v7.c
+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
ret = mvebu_v7_cpu_suspend(deepidle);
cpu_pm_exit();
+ /*
+ * If we failed to enter the desired state, indicate that we
+ * slept lightly.
+ */
if (ret)
- return ret;
+ return 0;
return index;
}

60
target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
View File

@ -1,60 +0,0 @@
From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sat, 9 Jul 2016 10:58:16 +0100
Subject: pci: mvebu: time out reset on link up
If the port reports that the link is up while we are resetting, there's
little point in waiting for the full duration.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve
if (port->reset_gpio) {
u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
+ unsigned int i;
of_property_read_u32(port->dn, "reset-delay-us",
&reset_udelay);
@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve
udelay(100);
gpiod_set_value_cansleep(port->reset_gpio, 0);
- msleep(reset_udelay / 1000);
+ for (i = 0; i < reset_udelay; i += 1000) {
+ if (mvebu_pcie_link_up(port))
+ break;
+ msleep(1);
+ }
+
+ printk("%s: reset completed in %dus\n", port->name, i);
}
return 0;
@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf
if (!child)
continue;
- ret = mvebu_pcie_powerup(port);
- if (ret < 0)
- continue;
-
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (IS_ERR(port->base)) {
dev_err(dev, "%s: cannot map registers\n", port->name);
port->base = NULL;
- mvebu_pcie_powerdown(port);
+ continue;
+ }
+
+ ret = mvebu_pcie_powerup(port);
+ if (ret < 0) {
+ port->base = NULL;
continue;
}