at91: add support for sam9x60-ek board

Add support for SAM9X60-EK board.

Hardware:
- SoC: SAM9X60
- RAM: Winbond W972GG6KB-25 (2Gbit DDR2)
- NAND Flash: Micron MT29F4G08ABAEA
- QSPI Flash: Microchip SST26VF064B
- EEPROM: Microchip 24AA02E48
- SDMMC: One standard 4-bit SD card interface
- USB: two stacked Type-A connectors with power switches, one micro-B
       USB device
- CAN: 2 interfaces (Microchip MCP2542)
- Ethernet: one 10/100Mbps
- WiFi/BT: one optional WiFi/Bluetooth interface
- Audio: one ClassD port
- Display: one 24-bit LCD interface
- Camera: one 12-bit image sensor interface
- IO: one IO expander (Microchip MCP23008)
- Debug ports: one J-Link-OB + CDC, one JTAG interface
- Leds: one RGB LED
- Buttons: 4 push button switches
- Expansion: one PIO connector, one mikrobus connector
- Power management: two power regulators, two power consumption measurement
                    devices

Flashing:
- follow the procedure at [1]

[1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
This commit is contained in:
Claudiu Beznea 2021-10-11 11:47:26 +03:00 committed by Hauke Mehrtens
parent 65c4e89dcf
commit 8746ba3657
3 changed files with 39 additions and 2 deletions

View File

@ -40,6 +40,18 @@ define AT91Bootstrap/at91sam9x5eksd_uboot
BUILD_DEVICES:=atmel_at91sam9x25ek atmel_at91sam9x35ek
endef
define AT91Bootstrap/sam9x60eknf_uboot
NAME:=AT91Bootstrap for SAM9X60-EK board (NandFlash)
BUILD_SUBTARGET:=sam9x
BUILD_DEVICES:=microchip_sam9x60ek
endef
define AT91Bootstrap/sam9x60eksd_uboot
NAME:=AT91Bootstrap for SAM9X60-EK board (SDcard)
BUILD_SUBTARGET:=sam9x
BUILD_DEVICES:=microchip_sam9x60ek
endef
define AT91Bootstrap/sama5d2_icpdf_qspi_uboot
TITLE:=AT91Bootstrap for SAMA5D2 ICP board (QSPI Flash)
BUILD_SUBTARGET:=sama5
@ -145,6 +157,8 @@ endef
AT91BOOTSTRAP_TARGETS := \
at91sam9x5eknf_uboot \
at91sam9x5eksd_uboot \
sam9x60eknf_uboot \
sam9x60eksd_uboot \
sama5d2_icpdf_qspi_uboot \
sama5d2_icpsd_uboot \
sama5d2_xplaineddf_uboot \

View File

@ -47,6 +47,18 @@ define U-Boot/at91sam9x5ek_mmc
atmel_at91sam9x35ek
endef
define U-Boot/sam9x60ek_nandflash
NAME:=SAM9X60-EK board (NandFlash)
BUILD_SUBTARGET:=sam9x
BUILD_DEVICES:=microchip_sam9x60ek
endef
define U-Boot/sam9x60ek_mmc
NAME:=SAM9X60-EK board (SDcard)
BUILD_SUBTARGET:=sam9x
BUILD_DEVICES:=microchip_sam9x60ek
endef
define U-Boot/sama5d3_xplained_nandflash
NAME:=SAMA5D3 Xplained board (NandFlash)
BUILD_SUBTARGET:=sama5
@ -135,6 +147,8 @@ UBOOT_TARGETS := \
at91sam9m10g45ek_nandflash \
at91sam9x5ek_nandflash \
at91sam9x5ek_mmc \
sam9x60ek_nandflash \
sam9x60ek_mmc \
sama5d3_xplained_nandflash \
sama5d3_xplained_mmc \
sama5d2_icp_mmc \

View File

@ -16,11 +16,11 @@ define Build/at91-sdcard
::$(DEVICE_NAME)-fit.itb
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-at91sam9x5ek_mmc/u-boot.bin \
$(BIN_DIR)/u-boot-$(if $(findstring sam9x60,$@),$(DEVICE_DTS:at91-%=%),at91sam9x5ek)_mmc/u-boot.bin \
::u-boot.bin
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-at91sam9x5eksd_uboot/at91bootstrap.bin \
$(BIN_DIR)/at91bootstrap-$(if $(findstring sam9x60,$@),$(DEVICE_DTS:at91-%=%),at91sam9x5ek)sd_uboot/at91bootstrap.bin \
::BOOT.bin
$(CP) uboot-env.txt $@-uboot-env.txt
@ -112,6 +112,15 @@ define Device/atmel_at91sam9x35ek
endef
TARGET_DEVICES += atmel_at91sam9x35ek
define Device/microchip_sam9x60ek
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAM9X60-EK
DEVICE_DTS := at91-sam9x60ek
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += microchip_sam9x60ek
define Device/calamp_lmu5000
$(Device/production)
DEVICE_VENDOR := CalAmp