kernel: bump 4.9 to 4.9.125

Refreshed all patches.

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
This commit is contained in:
Koen Vandeputte 2018-09-06 14:17:17 +02:00
parent 5c8d61d7e3
commit 81d73ae747
6 changed files with 14 additions and 20 deletions

View File

@ -2,11 +2,11 @@
LINUX_RELEASE?=1
LINUX_VERSION-4.9 = .124
LINUX_VERSION-4.14 = .67
LINUX_VERSION-4.9 = .125
LINUX_KERNEL_HASH-4.9.124 = 5ca6b0d48c8dd1265005169f1b97149a4e893668c0d8aa566a73c7663c8e4311
LINUX_KERNEL_HASH-4.14.67 = 3f4b056dc27233a78f7a4a35ed6fdcfd0a9680ec40b611a898bb6c8b905070ba
LINUX_KERNEL_HASH-4.9.125 = a764deef61bebfac1d07b2ed6890f93a12a9ab6d3fc3c53e3d850ed4681111cb
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

View File

@ -1,8 +1,6 @@
Index: linux-4.9.111/drivers/net/phy/at803x.c
===================================================================
--- linux-4.9.111.orig/drivers/net/phy/at803x.c
+++ linux-4.9.111/drivers/net/phy/at803x.c
@@ -461,12 +461,15 @@ static void at803x_link_change_notify(st
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -460,12 +460,15 @@ static void at803x_link_change_notify(st
static int at803x_aneg_done(struct phy_device *phydev)
{
@ -18,7 +16,7 @@ Index: linux-4.9.111/drivers/net/phy/at803x.c
/*
* in SGMII mode, if copper side autoneg is successful,
* also check SGMII side autoneg result
@@ -481,7 +484,8 @@ static int at803x_aneg_done(struct phy_d
@@ -480,7 +483,8 @@ static int at803x_aneg_done(struct phy_d
/* check if the SGMII link is OK. */
if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
pr_warn("803x_aneg_done: SGMII link is not ok\n");
@ -28,10 +26,8 @@ Index: linux-4.9.111/drivers/net/phy/at803x.c
}
/* switch back to copper page */
phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
Index: linux-4.9.111/include/linux/platform_data/phy-at803x.h
===================================================================
--- linux-4.9.111.orig/include/linux/platform_data/phy-at803x.h
+++ linux-4.9.111/include/linux/platform_data/phy-at803x.h
--- a/include/linux/platform_data/phy-at803x.h
+++ b/include/linux/platform_data/phy-at803x.h
@@ -7,6 +7,7 @@ struct at803x_platform_data {
int enable_rgmii_rx_delay:1;
int fixup_rgmii_tx_delay:1;

View File

@ -1,7 +1,5 @@
Index: linux-4.9.111/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
===================================================================
--- linux-4.9.111.orig/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ linux-4.9.111/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -134,7 +134,7 @@
#define QCA955X_PCI_CTRL_SIZE 0x100

View File

@ -8,7 +8,7 @@
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
@@ -231,6 +232,33 @@ static struct fixed_phy_status bcm47xx_f
@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
@ -42,7 +42,7 @@
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -250,6 +278,7 @@ static int __init bcm47xx_register_bus_c
@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);

View File

@ -302,7 +302,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
if (alx->flags & ALX_FLAG_USING_MSIX) {
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1885,7 +1885,7 @@ static int atl1c_clean(struct napi_struc
@@ -1886,7 +1886,7 @@ static int atl1c_clean(struct napi_struc
if (work_done < budget) {
quit_polling:

View File

@ -1658,7 +1658,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
return IRQ_HANDLED;
}
}
@@ -923,12 +932,32 @@ int usb_otg_start(struct platform_device
@@ -925,12 +934,32 @@ int usb_otg_start(struct platform_device
temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
switch (pdata->phy_mode) {
case FSL_USB2_PHY_ULPI: