ath79: add support for D-Link DIR-842 C3

Hardware spec of DIR-842 C3:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: circuit onboard, but components are not soldered

Flash instructions:

1. Upgrade the factory.bin through the factory web interface or
   the u-boot failsafe interface.
   The firmware will boot up correctly for the first time.
   Do not power off the device after OpenWrt has booted.
   Otherwise the u-boot will enter failsafe mode as the checksum
   of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
   After upgrading completes the u-boot won't complain about the
   firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
   just upgrade the factory.bin through the u-boot failsafe interface
   and then goto step 2.

Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
This commit is contained in:
Perry Melange 2019-08-07 19:25:13 +02:00 committed by David Bauer
parent d7b4b5ec24
commit 796ad2f7ef
6 changed files with 53 additions and 0 deletions

View File

@ -64,6 +64,7 @@ comfast,cf-e5)
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;

View File

@ -123,6 +123,7 @@ ath79_setup_interfaces()
dlink,dir-835-a1|\
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
dlink,dir-859-a1|\
engenius,epg5000|\
tplink,archer-c2-v3|\
@ -316,6 +317,7 @@ ath79_setup_macs()
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)

View File

@ -107,6 +107,7 @@ case "$FIRMWARE" in
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)

View File

@ -191,6 +191,7 @@ case "$FIRMWARE" in
case $board in
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\
nec,wg1200cr)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)

View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9563_dlink_dir-842-c.dtsi"
/ {
compatible = "dlink,dir-842-c3", "qca,qca9563";
model = "D-Link DIR-842 C3";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
wps {
label = "dir-842-c3:green:wps";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
power: power {
label = "dir-842-c3:green:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet {
label = "dir-842-c3:green:internet";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
label = "dir-842-c3:green:wlan";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};

View File

@ -399,6 +399,13 @@ define Device/dlink_dir-842-c2
endef
TARGET_DEVICES += dlink_dir-842-c2
define Device/dlink_dir-842-c3
$(Device/dlink_dir-842-c)
DEVICE_VARIANT := C3
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += dlink_dir-842-c3
define Device/elecom_wrc-1750ghbk2-i
ATH_SOC := qca9563
DEVICE_VENDOR := ELECOM