ramips: add support for WeVO W2914NS v2

Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe>
This commit is contained in:
perillamint 2016-11-18 20:46:27 +09:00 committed by John Crispin
parent a74394be00
commit 68634426fe
8 changed files with 168 additions and 0 deletions

View File

@ -303,6 +303,9 @@ vocore)
ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
set_wifi_led "$board:green:status"
;;
w2914nsv2)
set_usb_led "$board:green:usb"
;;
w502u)
set_usb_led "$board:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"

View File

@ -87,6 +87,7 @@ ramips_setup_interfaces()
sap-g3200u3|\
sk-wb8|\
vr500|\
w2914nsv2|\
wf-2881|\
witi|\
wl-wn575a3|\

View File

@ -13,6 +13,9 @@ ramips_board_detect() {
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
case "$machine" in
*"11AC NAS Router")
name="w2914nsv2"
;;
*"3G150B")
name="3g150b"
;;
@ -454,6 +457,9 @@ ramips_board_detect() {
*"W150M")
name="w150m"
;;
*"W2914NS v2")
name="w2914nsv2"
;;
*"W306R V2.0")
name="w306r-v20"
;;

View File

@ -133,6 +133,7 @@ platform_check_image() {
vocore|\
vr500|\
w150m|\
w2914nsv2|\
w306r-v20|\
w502u|\
wf-2881|\

View File

@ -0,0 +1,12 @@
/dts-v1/;
#include "W2914NSV2.dtsi"
/ {
model = "WeVO 11AC NAS Router";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
};

View File

@ -0,0 +1,12 @@
/dts-v1/;
#include "W2914NSV2.dtsi"
/ {
model = "WeVO W2914NS v2";
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
};

View File

@ -0,0 +1,117 @@
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb {
label = "w2914nsv2:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
};
};
&xhci {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pcie {
status = "okay";
pcie0 {
wifi@14c3,7662 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
mediatek,5ghz = <0>;
};
};
pcie1 {
wifi@14c3,7603 {
compatible = "pci14c3,7603";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "jtag", "mdio";
ralink,function = "gpio";
};
};
};

View File

@ -207,6 +207,22 @@ define Device/rb750gr3
endef
TARGET_DEVICES += rb750gr3
define Device/w2914nsv2
DTS := W2914NSV2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WeVO W2914NS v2
DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621 kmod-mt76
endef
TARGET_DEVICES += w2914nsv2
define Device/11acnas
DTS := 11ACNAS
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WeVO 11AC NAS Router
DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621 kmod-mt76
endef
TARGET_DEVICES += 11acnas
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile