mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ar71xx: add support for TP-Link TL-WR1043N v5 

TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option.

The software is more in line with the Archer series in that it uses a
nested bootloader scheme.

Specifications:

 - QCA9563 at 775 MHz
 - 64 MB RAM
 - 16 MB flash
 - 3 (non-detachable) Antennas / 450 Mbit
 - 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
 - reset and Wi-Fi buttons

Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
This commit is contained in:
Tim Thorpe 2017-09-25 04:38:49 -05:00 committed by Piotr Dymacz
parent e202a8b9f6
commit 673793d753
14 changed files with 162 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -813,14 +813,20 @@ tl-wr1043nd-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr1043n-v5|\
tl-wr1043nd-v4)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
case "$board" in
tl-wr1043nd-v4)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
;;
esac
;;
tl-wr2543n)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt"

4
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -277,7 +277,8 @@ ar71xx_setup_interfaces()
dir-835-a1|\
esr900|\
mynet-n750|\
sr3200)
sr3200|\
tl-wr1043n-v5)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
@ -542,6 +543,7 @@ ar71xx_setup_macs()
fritz300e)
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
tl-wr1043n-v5|\
tl-wr1043nd-v4)
lan_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$lan_mac" 1)

1
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -395,6 +395,7 @@ get_status_led() {
tl-wdr3320-v2|\
tl-wdr3500|\
tl-wr1041n-v2|\
tl-wr1043n-v5|\
tl-wr1043nd|\
tl-wr1043nd-v2|\
tl-wr1043nd-v4|\

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -1130,6 +1130,9 @@ ar71xx_board_detect() {
*"TL-WR1041N v2")
name="tl-wr1041n-v2"
;;
*"TL-WR1043N v5")
name="tl-wr1043n-v5"
;;
*"TL-WR1043ND")
name="tl-wr1043nd"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -278,6 +278,7 @@ platform_check_image() {
tew-712br|\
tew-732br|\
tew-823dru|\
tl-wr1043n-v5|\
tl-wr942n-v1|\
unifi|\
unifi-outdoor|\

1
target/linux/ar71xx/config-4.4
View File

@ -199,6 +199,7 @@ CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043N_V5=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND_V4=y

1
target/linux/ar71xx/config-4.9
View File

@ -197,6 +197,7 @@ CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
CONFIG_ATH79_MACH_TL_WPA8630=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043N_V5=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND_V4=y

9
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -1810,6 +1810,15 @@ config ATH79_MACH_TL_WR1041N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_TL_WR1043N_V5
bool "TP-LINK TL-WR1043N v5 support"
select SOC_QCA956X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_TL_WR1043ND
bool "TP-LINK TL-WR1043ND support"
select SOC_AR913X

82
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
View File

@ -5,6 +5,7 @@
* Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
* Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de>
* Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net>
* Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net>
*
* Derived from: mach-dir-869-a1.c
*
@ -62,6 +63,8 @@
#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
#define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008
static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
{
.name = "tp-link:green:wps",
@ -188,3 +191,82 @@ static void __init tl_wr1043nd_v4_setup(void)
MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
"TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = {
{
.name = "tp-link:green:wps",
.gpio = TL_WR1043_V4_GPIO_LED_WPS,
.active_low = 1,
},
{
.name = "tp-link:green:system",
.gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
.active_low = 1,
},
{
.name = "tp-link:green:wlan",
.gpio = TL_WR1043_V4_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "tp-link:green:wan",
.gpio = TL_WR1043_V4_GPIO_LED_WAN,
.active_low = 1,
},
{
.name = "tp-link:green:lan1",
.gpio = TL_WR1043_V4_GPIO_LED_LAN1,
.active_low = 1,
},
{
.name = "tp-link:green:lan2",
.gpio = TL_WR1043_V4_GPIO_LED_LAN2,
.active_low = 1,
},
{
.name = "tp-link:green:lan3",
.gpio = TL_WR1043_V4_GPIO_LED_LAN3,
.active_low = 1,
},
{
.name = "tp-link:green:lan4",
.gpio = TL_WR1043_V4_GPIO_LED_LAN4,
.active_low = 1,
},
};
/* The 1043Nv5 is identical to the 1043NDv4,
* only missing the usb and small firmware layout changes */
static void __init tl_wr1043nv5_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio),
tl_wr1043n_v5_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
tl_wr1043nd_v4_gpio_keys);
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
}
MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5",
tl_wr1043nv5_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -247,6 +247,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */

13
target/linux/ar71xx/image/tp-link.mk
View File

@ -676,6 +676,17 @@ define Device/tl-wr1041n-v2
endef
TARGET_DEVICES += tl-wr1041n-v2
define Device/tl-wr1043n-v5
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK TL-WR1043N v5
BOARDNAME := TL-WR1043N-v5
SUPPORTED_DEVICES := tl-wr1043n-v5
DEVICE_PROFILE := TLWR1043
MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro
IMAGE_SIZE := 15104k
TPLINK_BOARD_ID := TLWR1043NV5
endef
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
@ -726,7 +737,7 @@ define Device/tl-wr2543-v1
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
endef
TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 tl-wr2543-v1
TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 tl-wr1043n-v5 tl-wr2543-v1
define Device/tl-wr703n-v1
$(Device/tplink-4mlzma)

1
target/linux/ar71xx/mikrotik/config-default
View File

@ -159,6 +159,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
# CONFIG_ATH79_MACH_TL_WPA8630 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set

1
target/linux/ar71xx/nand/config-default
View File

@ -155,6 +155,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
# CONFIG_ATH79_MACH_TL_WPA8630 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set

40
tools/firmware-utils/src/tplink-safeloader.c
View File

@ -683,6 +683,42 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the TL-WR1043 v5 */
{
.id = "TLWR1043NV5",
.vendor = "",
.support_list =
"SupportList:\n"
"{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
"{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
.support_trail = '\x00',
.soft_ver = "soft_ver:1.0.0\n",
.partitions = {
{"factory-boot", 0x00000, 0x20000},
{"fs-uboot", 0x20000, 0x20000},
{"os-image", 0x40000, 0x180000},
{"file-system", 0x1c0000, 0xd40000},
{"default-mac", 0xf00000, 0x00200},
{"pin", 0xf00200, 0x00200},
{"device-id", 0xf00400, 0x00100},
{"product-info", 0xf00500, 0x0fb00},
{"soft-version", 0xf10000, 0x01000},
{"extra-para", 0xf11000, 0x01000},
{"support-list", 0xf12000, 0x0a000},
{"profile", 0xf1c000, 0x04000},
{"default-config", 0xf20000, 0x10000},
{"user-config", 0xf30000, 0x40000},
{"qos-db", 0xf70000, 0x40000},
{"certificate", 0xfb0000, 0x10000},
{"partition-table", 0xfc0000, 0x10000},
{"log", 0xfd0000, 0x20000},
{"radio", 0xff0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the TL-WR1043 v4 */
{
.id = "TLWR1043NDV4",
@ -1261,7 +1297,9 @@ static void build_image(const char *output,
parts[3] = read_file("os-image", kernel_image, false);
parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) {
/* Some devices need the extra-para partition to accept the firmware */
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);
} else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0) {