mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: 5.10: backport additional qca8k fixes 

Backport 3 additional fixes for qca8k.
- Fix MTU calculation
- Fix a bug with config set to the wrong PAD when secondary cpu port is defined.
- Fix redundant check in parse_port_config

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
This commit is contained in:
Ansuel Smith 2021-12-19 01:16:11 +01:00 committed by Hauke Mehrtens
parent 2bb02ccae3
commit 5cf198f764
3 changed files with 123 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
target/linux/generic/backport-5.10/751-v5.16-net-dsa-qca8k-fix-internal-delay-applied-to-the-wrong-PAD.patch Normal file
View File

@ -0,0 +1,48 @@
From 3b00a07c2443745d62babfe08dbb2ad8e649526e Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Fri, 19 Nov 2021 03:03:49 +0100
Subject: [PATCH] net: dsa: qca8k: fix internal delay applied to the wrong PAD
config
With SGMII phy the internal delay is always applied to the PAD0 config.
This is caused by the falling edge configuration that hardcode the reg
to PAD0 (as the falling edge bits are present only in PAD0 reg)
Move the delay configuration before the reg overwrite to correctly apply
the delay.
Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1433,6 +1433,12 @@ qca8k_phylink_mac_config(struct dsa_swit
qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (state->interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
/* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
* falling edge is set writing in the PORT0 PAD reg
*/
@@ -1455,12 +1461,6 @@ qca8k_phylink_mac_config(struct dsa_swit
QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
val);
- /* From original code is reported port instability as SGMII also
- * require delay set. Apply advised values here or take them from DT.
- */
- if (state->interface == PHY_INTERFACE_MODE_SGMII)
- qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
-
break;
default:
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",

46
target/linux/generic/backport-5.10/752-v5.16-net-dsa-qca8k-fix-MTU-calculation.patch Normal file
View File

@ -0,0 +1,46 @@
From 65258b9d8cde45689bdc86ca39b50f01f983733b Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Fri, 19 Nov 2021 03:03:50 +0100
Subject: [PATCH] net: dsa: qca8k: fix MTU calculation
qca8k has a global MTU, so its tracking the MTU per port to make sure
that the largest MTU gets applied.
Since it uses the frame size instead of MTU the driver MTU change function
will then add the size of Ethernet header and checksum on top of MTU.
The driver currently populates the per port MTU size as Ethernet frame
length + checksum which equals 1518.
The issue is that then MTU change function will go through all of the
ports, find the largest MTU and apply the Ethernet header + checksum on
top of it again, so for a desired MTU of 1500 you will end up with 1536.
This is obviously incorrect, so to correct it populate the per port struct
MTU with just the MTU and not include the Ethernet header + checksum size
as those will be added by the MTU change function.
Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1256,8 +1256,12 @@ qca8k_setup(struct dsa_switch *ds)
/* Set initial MTU for every port.
* We have only have a general MTU setting. So track
* every port and set the max across all port.
+ * Set per port MTU to 1500 as the MTU change function
+ * will add the overhead and if its set to 1518 then it
+ * will apply the overhead again and we will end up with
+ * MTU of 1536 instead of 1518
*/
- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
+ priv->port_mtu[i] = ETH_DATA_LEN;
}
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */

29
target/linux/generic/backport-5.10/753-net-next-net-dsa-qca8k-remove-redundant-check-in-parse_port_config.patch Normal file
View File

@ -0,0 +1,29 @@
From b9133f3ef5a2659730cf47a74bd0a9259f1cf8ff Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Mon, 22 Nov 2021 16:23:40 +0100
Subject: net: dsa: qca8k: remove redundant check in parse_port_config
The very next check for port 0 and 6 already makes sure we don't go out
of bounds with the ports_config delay table.
Remove the redundant check.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -983,7 +983,7 @@ qca8k_parse_port_config(struct qca8k_pri
u32 delay;
/* We have 2 CPU port. Check them */
- for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
+ for (port = 0; port < QCA8K_NUM_PORTS; port++) {
/* Skip every other port */
if (port != 0 && port != 6)
continue;