ramips: add support for Netgear R6120

This patch adds support for the Netgear R6120, aka Netgear AC1200.

Specification:
- SoC: MediaTek MT7628 (580 MHz)
- Flash: 16 MiB
- RAM: 64 MiB
- Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E)
- LAN speed: 10/100
- LAN ports: 4
- WAN speed: 10/100
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600

To flash use nmrpflash with the provided factory.img.
Flashing via webinterface will not work, for now.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
This commit is contained in:
Ludwig Thomeczek 2018-06-12 21:17:23 +02:00 committed by Mathias Kresin
parent e5b802b9c2
commit 5543d63fc8
5 changed files with 180 additions and 0 deletions

View File

@ -319,6 +319,11 @@ mzk-ex750np)
na930)
set_usb_led "$boardname:blue:status"
;;
netgear,r6120)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt"
;;
newifi-d1)
set_usb_led "$boardname:red:status"
;;

View File

@ -103,6 +103,7 @@ ramips_setup_interfaces()
mzk-750dhp|\
mzk-w300nh2|\
d-team,newifi-d2|\
netgear,r6120|\
nixcore-x1-8M|\
nixcore-x1-16M|\
oy-0001|\

View File

@ -132,6 +132,7 @@ platform_check_image() {
psr-680w|\
px-4885-4M|\
px-4885-8M|\
netgear,r6120|\
rb750gr3|\
re6500|\
rp-n53|\

View File

@ -0,0 +1,145 @@
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,r6120", "mediatek,mt7628an-soc";
model = "Netgear AC1200 R6120";
aliases {
led-status = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "r6120:green:lan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "r6120:green:power";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
wlan {
label = "r6120:green:wlan2g";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wlan_orange {
label = "r6120:orange:wlan2g";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
wlan5 {
label = "r6120:green:wlan5g";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
wlan5_orange {
label = "r6120:orange:wlan5g";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p0led_an", "p1led_an", "p2led_an",
"p3led_an", "p4led_an", "wdt", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x20000>;
read-only;
};
nvram: partition@60000 {
label = "nvram";
reg = <0x60000 0x30000>;
read-only;
};
partition@90000 {
label = "firmware";
reg = <0x90000 0xf60000>;
};
partition@ff0000 {
label = "reserved";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-mac-address = <&nvram 0x100b0>;
mediatek,mtd-eeprom = <&factory 0x20000>;
};
&ethernet {
mtd-mac-address = <&nvram 0x100b0>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x28000>;
ieee80211-freq-limit = <5000000 6000000>;
mtd-mac-address = <&nvram 0x100b0>;
mtd-mac-address-increment = <(2)>;
};
};

View File

@ -2,6 +2,17 @@
# MT76x8 Profiles
#
DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
define Build/mksercommfw
$(STAGING_DIR_HOST)/bin/mksercommfw \
$@ \
$(SERCOMM_KERNEL_OFFSET) \
$(SERCOMM_HWID) \
$(SERCOMM_HWVER) \
$(SERCOMM_SWVER)
endef
define Device/tplink
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
@ -91,6 +102,23 @@ define Device/mt7628
endef
TARGET_DEVICES += mt7628
define Device/netgear_r6120
DTS := R6120
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Netgear AC1200 R6120
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
SERCOMM_KERNEL_OFFSET := 90000
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0040
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | mksercommfw
endef
TARGET_DEVICES += netgear_r6120
define Device/omega2
DTS := OMEGA2
IMAGE_SIZE := $(ralink_default_fw_size_16M)