ramips: add support for ALFA Network AC1200RM
ALFA Network AC1200RM is an AC1200 router, with 5-port FE switch and USB 2.0 port. Device is based on MediaTek MT7620A + MT7612EN. Specification: - MT7620A (580 MHz) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet with passive PoE output in WAN and LAN4 - 2T2R 2.4 GHz (MT7620A) - 2T2R 5 GHz (MT7612EN) - 1x USB 2.0 - 9x LED (8 driven by GPIO) - 1x button (reset) - DC jack for main power input (12-24 V) - 2x UART, I2C, I2S and LED headers Flash instruction (do it under U-Boot, using UART and TFTP server): Select option "2: Load system code then write to Flash via TFTP" and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
parent
53e3df2e71
commit
5352669c2c
|
|
@ -56,6 +56,10 @@ air3gii)
|
|||
set_wifi_led "$boardname:green:wlan"
|
||||
set_usb_led "$boardname:green:mobile"
|
||||
;;
|
||||
alfa-network,ac1200rm)
|
||||
set_wifi_led "$boardname:green:wlan2g" "wlan1"
|
||||
ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
|
||||
;;
|
||||
all0256n-4M|\
|
||||
all0256n-8M)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
|
|
|||
|
|
@ -71,6 +71,7 @@ ramips_setup_interfaces()
|
|||
;;
|
||||
3g-6200n|\
|
||||
ai-br100|\
|
||||
alfa-network,ac1200rm|\
|
||||
d240|\
|
||||
db-wrt01|\
|
||||
dir-300-b7|\
|
||||
|
|
|
|||
|
|
@ -69,6 +69,13 @@ get_status_led() {
|
|||
ht-tm02)
|
||||
status_led="$boardname:blue:wlan"
|
||||
;;
|
||||
alfa-network,ac1200rm|\
|
||||
awapn2403|\
|
||||
dir-645|\
|
||||
sk-wb8|\
|
||||
wrh-300cr)
|
||||
status_led="$boardname:green:wps"
|
||||
;;
|
||||
all0239-3g|\
|
||||
dcs-930|\
|
||||
dir-300-b1|\
|
||||
|
|
@ -102,12 +109,6 @@ get_status_led() {
|
|||
ip2202)
|
||||
status_led="$boardname:green:run"
|
||||
;;
|
||||
awapn2403|\
|
||||
dir-645|\
|
||||
sk-wb8|\
|
||||
wrh-300cr)
|
||||
status_led="$boardname:green:wps"
|
||||
;;
|
||||
c108)
|
||||
status_led="$boardname:green:lan"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ platform_check_image() {
|
|||
a5-v11|\
|
||||
ai-br100|\
|
||||
air3gii|\
|
||||
alfa-network,ac1200rm|\
|
||||
all0239-3g|\
|
||||
all0256n-4M|\
|
||||
all0256n-8M|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,171 @@
|
|||
/*
|
||||
* BSD LICENSE
|
||||
*
|
||||
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the names of the copyright holders nor the names of any
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7620a.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
|
||||
model = "ALFA Network AC1200RM";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan2g {
|
||||
label = "ac1200rm:green:wlan2g";
|
||||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "ac1200rm:green:wps";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
mediatek,portmap = "llllw";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ephy_pins>;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gsw {
|
||||
mediatek,port4 = "ephy";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
pcie-bridge {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-sources = <2>;
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "nd_sd", "spi refclk", "wled";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0>;
|
||||
};
|
||||
|
|
@ -27,6 +27,15 @@ define Device/ai-br100
|
|||
endef
|
||||
TARGET_DEVICES += ai-br100
|
||||
|
||||
define Device/alfa-network_ac1200rm
|
||||
DTS := AC1200RM
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_TITLE := ALFA Network AC1200RM
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
||||
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
||||
endef
|
||||
TARGET_DEVICES += alfa-network_ac1200rm
|
||||
|
||||
define Device/Archer
|
||||
TPLINK_HWREVADD := 0
|
||||
TPLINK_HVERSION := 3
|
||||
|
|
|
|||
Loading…
Reference in New Issue