kirkwood: add support for Iomega Storcenter ix4-200d
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1200Mhz - Flash size: 32 MiB - RAM: 512MB - LAN: 2x 1Gbit/s - 3x USB 2.0 Notes: - The blue drive LED is triggered by HDD activity, it can not be controlled via GPIO. - The LCD screen requires proprietary code and does not function at this time. - Due to a kernel-related issue with the Marvell 88SE6121 SATA controller, currently only trays numbered #3 and #4 work, #1 and #2 do not. [1] Serial pinout: CN4 -------------- | 10 8 6 4 2 | | 9 7 5 3 1 | -------------- PIN 1 Mark (fat line) 1 = RXD 4 = TXD 6 = GND 9 = 3.3V (not necessary to connect) Installation instructions: 1. download initramfs-uImage and copy into tftp server 2. connect the tftp server to network port #1 3. access uboot environment with serial cable and run setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x00800000 [initramfs-uImage filename] bootm 0x00800000 4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash [1] https://bugzilla.kernel.org/show_bug.cgi?id=216094 Signed-off-by: Sander van Deijck <sander@vandeijck.com> (aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Sander van Deijck
Christian Lamparter
parent
7365e6b00a
commit
4642d8abdc
|
|
@ -37,6 +37,9 @@ kirkwood_setup_interfaces()
|
|||
endian,4i-edge-200)
|
||||
ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
|
||||
;;
|
||||
iom,ix4-200d)
|
||||
ucidef_set_interface_lan "eth0 eth1" "dhcp"
|
||||
;;
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea3500|\
|
||||
linksys,ea4500)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,202 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Iomega ix4-200d";
|
||||
compatible = "iom,ix4-200d", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_white;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_power_white;
|
||||
led-upgrade = &led_status_red;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
|
||||
adt7473@2e {
|
||||
compatible = "adi,adt7473";
|
||||
reg = <0x2e>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_spi: pmx-spi {
|
||||
marvell,pins = "mpp12", "mpp13", "mpp14";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_keys: pmx-keys {
|
||||
marvell,pins = "mpp16", "mpp29", "mpp47", "mpp49";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi3 {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <0x1>;
|
||||
ranges;
|
||||
status = "okay";
|
||||
sck-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
mosi-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
cs-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
num-chipselects = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio_spi: gpio_spi@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <1>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_keys>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button-0 {
|
||||
label = "Next Button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
button-2 {
|
||||
label = "Cancel Button";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-3 {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER2>;
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_white: led-0 {
|
||||
label = "status:white";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio_spi 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_red: led-1 {
|
||||
label = "status:red";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_white: led-2 {
|
||||
label = "power:white";
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
ethernet1-port@0 {
|
||||
phy-handle = <ðphy1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@8 {
|
||||
reg = <8>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@9 {
|
||||
reg = <9>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "u-boot environment";
|
||||
reg = <0xa0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "kernel";
|
||||
reg = <0x100000 0x300000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "ubi";
|
||||
reg = <0x400000 0x1C00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pciec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -184,6 +184,24 @@ define Device/iom_ix2-200
|
|||
endef
|
||||
TARGET_DEVICES += iom_ix2-200
|
||||
|
||||
define Device/iom_ix4-200d
|
||||
DEVICE_VENDOR := Iomega
|
||||
DEVICE_MODEL := StorCenter ix4-200d
|
||||
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
|
||||
kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
|
||||
kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio
|
||||
PAGESIZE := 512
|
||||
SUBPAGESIZE := 256
|
||||
BLOCKSIZE := 16k
|
||||
KERNEL_SIZE := 3072k
|
||||
KERNEL_IN_UBI :=
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGE_SIZE := 31744k
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
||||
check-size
|
||||
endef
|
||||
TARGET_DEVICES += iom_ix4-200d
|
||||
|
||||
define Device/iptime_nas1
|
||||
DEVICE_VENDOR := ipTIME
|
||||
DEVICE_MODEL := NAS1
|
||||
|
|
|
|||
Loading…
Reference in New Issue