From 455331a8ec804a99280125ed17665b19ae30bae4 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 20 Apr 2008 06:40:36 +0000 Subject: [PATCH] nuke trailing whitespaces SVN-Revision: 10872 --- .../files/arch/mips/atheros/ar5312/irq.c | 4 +- .../files/arch/mips/atheros/ar5315/irq.c | 4 +- .../atheros/files/arch/mips/atheros/board.c | 14 ++-- .../atheros/files/arch/mips/atheros/gpio.c | 4 +- .../atheros/files/arch/mips/atheros/prom.c | 2 +- .../atheros/files/arch/mips/atheros/reset.c | 10 +-- .../files/drivers/mtd/devices/spiflash.c | 46 ++++++------- .../atheros/files/drivers/net/ar2313/ar2313.c | 62 ++++++++--------- .../atheros/files/drivers/net/ar2313/ar2313.h | 10 +-- .../atheros/files/drivers/net/ar2313/dma.h | 6 +- .../asm-mips/mach-atheros/ar5312/ar5312.h | 2 +- .../asm-mips/mach-atheros/ar5315/ar5315.h | 66 +++++++++---------- .../include/asm-mips/mach-atheros/ar531x.h | 6 +- 13 files changed, 118 insertions(+), 118 deletions(-) diff --git a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c index 95bcf3a458..e2117a2ddd 100644 --- a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c +++ b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c @@ -56,7 +56,7 @@ asmlinkage void ar5312_irq_dispatch(void) } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) do_IRQ(AR531X_MISC_IRQ_AHB_PROC); else if (ar531x_misc_intrs & AR531X_ISR_GPIO) - ar5312_gpio_irq_dispatch(); + ar5312_gpio_irq_dispatch(); else if ((ar531x_misc_intrs & AR531X_ISR_UART0)) do_IRQ(AR531X_MISC_IRQ_UART0); else if (ar531x_misc_intrs & AR531X_ISR_WD) @@ -140,7 +140,7 @@ static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", procAddr, proc1, dmaAddr, dma1); - + machine_restart("AHB error"); /* Catastrophic failure */ return IRQ_HANDLED; } diff --git a/target/linux/atheros/files/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros/files/arch/mips/atheros/ar5315/irq.c index 621c7fc0b8..ed784ba88a 100644 --- a/target/linux/atheros/files/arch/mips/atheros/ar5315/irq.c +++ b/target/linux/atheros/files/arch/mips/atheros/ar5315/irq.c @@ -89,7 +89,7 @@ static void ar5315_gpio_intr_enable(unsigned int irq) /* reconfigure GPIO line as input */ sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio)); - + /* Enable interrupt with edge detection */ sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3)); } @@ -203,7 +203,7 @@ ar5315_misc_intr_disable(unsigned int irq) case AR531X_MISC_IRQ_SPI: imr &= ~AR5315_ISR_SPI; break; - + case AR531X_MISC_IRQ_TIMER: imr &= (~AR5315_ISR_TIMER); break; diff --git a/target/linux/atheros/files/arch/mips/atheros/board.c b/target/linux/atheros/files/arch/mips/atheros/board.c index 59aa134a3f..1b1e04fcee 100644 --- a/target/linux/atheros/files/arch/mips/atheros/board.c +++ b/target/linux/atheros/files/arch/mips/atheros/board.c @@ -51,7 +51,7 @@ static u8 *find_board_config(char *flash_limit) printk("WARNING: No board configuration data found!\n"); addr = NULL; } - + return addr; } @@ -59,8 +59,8 @@ static u8 *find_radio_config(char *flash_limit, char *board_config) { int dataFound; u32 radio_config; - - /* + + /* * Now find the start of Radio Configuration data, using heuristics: * Search forward from Board Configuration data by 0x1000 bytes * at a time until we find non-0xffffffff. @@ -123,14 +123,14 @@ int __init ar531x_find_config(char *flash_limit) printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config); rcfg_size = BOARD_CONFIG_BUFSZ - ((rcfg - bcfg) & (BOARD_CONFIG_BUFSZ - 1)); memcpy(radio_config, rcfg, rcfg_size); - + return 0; } void __init serial_setup(unsigned long mapbase, unsigned int uartclk) { struct uart_port s; - + memset(&s, 0, sizeof(s)); s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; @@ -162,7 +162,7 @@ const char *get_system_type(void) case MACH_ATHEROS_AR2312: return "Atheros AR2312"; - + case MACH_ATHEROS_AR2313: return "Atheros AR2313"; #endif @@ -225,7 +225,7 @@ static int __init ar531x_register_gpiodev(void) struct platform_device *pdev; printk(KERN_INFO "ar531x: Registering GPIODEV device\n"); - + pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); if (!pdev) { diff --git a/target/linux/atheros/files/arch/mips/atheros/gpio.c b/target/linux/atheros/files/arch/mips/atheros/gpio.c index 5e34c857cc..26fba06446 100644 --- a/target/linux/atheros/files/arch/mips/atheros/gpio.c +++ b/target/linux/atheros/files/arch/mips/atheros/gpio.c @@ -27,7 +27,7 @@ #include #include #include "ar531x.h" -/* +/* GPIO Interrupt Support Make use of request_irq() and the function gpio_to_irq() to trap gpio events */ @@ -147,7 +147,7 @@ static void ar5315_gpio_intr_enable(unsigned int irq) { sysRegWrite(AR5315_GPIO_CR, reg); (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */ - /* Locate a free register slot to enable gpio intr + /* Locate a free register slot to enable gpio intr will fail silently if no more slots are available */ reg = sysRegRead(AR5315_GPIO_INT); diff --git a/target/linux/atheros/files/arch/mips/atheros/prom.c b/target/linux/atheros/files/arch/mips/atheros/prom.c index 73c66aca50..82617cdd3c 100644 --- a/target/linux/atheros/files/arch/mips/atheros/prom.c +++ b/target/linux/atheros/files/arch/mips/atheros/prom.c @@ -35,7 +35,7 @@ void __init prom_init(void) DO_AR5315(ar5315_prom_init();) #if 0 argv = (char **)fw_arg1; - /* RedBoot desired command line is argv[1] */ + /* RedBoot desired command line is argv[1] */ strcat(arcs_cmdline, argv[1]); #endif } diff --git a/target/linux/atheros/files/arch/mips/atheros/reset.c b/target/linux/atheros/files/arch/mips/atheros/reset.c index 3230aa1155..2342de81e0 100644 --- a/target/linux/atheros/files/arch/mips/atheros/reset.c +++ b/target/linux/atheros/files/arch/mips/atheros/reset.c @@ -37,7 +37,7 @@ static void hotplug_button(struct work_struct *wq) size_t len; char *scratch, *s; char buf[128]; - + event = container_of(wq, struct event_t, wq); if (!uevent_sock) goto done; @@ -48,7 +48,7 @@ static void hotplug_button(struct work_struct *wq) skb = alloc_skb(len + 2048, GFP_KERNEL); if (!skb) goto done; - + /* add header */ scratch = skb_put(skb, len); sprintf(scratch, "%s@",s); @@ -80,7 +80,7 @@ static irqreturn_t button_handler(int irq, void *dev_id) event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); if (!event) return IRQ_NONE; - + pressed = !pressed; DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) @@ -99,7 +99,7 @@ static irqreturn_t button_handler(int irq, void *dev_id) void ar531x_disable_reset_button(void) { - disable_irq(AR531X_RESET_GPIO_IRQ); + disable_irq(AR531X_RESET_GPIO_IRQ); } EXPORT_SYMBOL(ar531x_disable_reset_button); @@ -109,7 +109,7 @@ int __init ar531x_init_reset(void) bcfg = (struct ar531x_boarddata *) board_config; seen = jiffies; - + request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL); return 0; diff --git a/target/linux/atheros/files/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files/drivers/mtd/devices/spiflash.c index 7bfc252efe..c4c2016d8b 100644 --- a/target/linux/atheros/files/drivers/mtd/devices/spiflash.c +++ b/target/linux/atheros/files/drivers/mtd/devices/spiflash.c @@ -69,7 +69,7 @@ spin_lock_bh(&spidata->mutex); \ } \ } while (0) - + static __u32 spiflash_regread32(int reg); static void spiflash_regwrite32(int reg, __u32 data); @@ -132,7 +132,7 @@ struct opcodes { /* Driver private data structure */ struct spiflash_data { - struct mtd_info *mtd; + struct mtd_info *mtd; struct mtd_partition *parsed_parts; /* parsed partitions */ void *readaddr; /* memory mapped data for read */ void *mmraddr; /* memory mapped register space */ @@ -161,7 +161,7 @@ spiflash_regread32(int reg) return (*data); } -static void +static void spiflash_regwrite32(int reg, __u32 data) { volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg); @@ -171,7 +171,7 @@ spiflash_regwrite32(int reg, __u32 data) } -static __u32 +static __u32 spiflash_sendcmd (int op, u32 addr) { u32 reg; @@ -187,7 +187,7 @@ spiflash_sendcmd (int op, u32 addr) spiflash_regwrite32(SPI_FLASH_CTL, reg); busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0); - + if (!ptr_opcode->rx_cnt) return 0; @@ -218,12 +218,12 @@ spiflash_sendcmd (int op, u32 addr) * Function returns 0 for failure. * and flashconfig_tbl array index for success. */ -static int +static int spiflash_probe_chip (void) { __u32 sig; int flash_size; - + /* Read the signature on the flash device */ spin_lock_bh(&spidata->mutex); sig = spiflash_sendcmd(SPI_RD_SIG, 0); @@ -267,7 +267,7 @@ retry: spin_unlock_bh(&spidata->mutex); schedule(); remove_wait_queue(&spidata->wq, &wait); - + if(signal_pending(current)) return 0; @@ -285,7 +285,7 @@ static inline void spiflash_done(void) wake_up(&spidata->wq); } -static int +static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) { struct opcodes *ptr_opcode; @@ -312,7 +312,7 @@ spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) spin_unlock_bh(&spidata->mutex); msleep(800); spin_lock_bh(&spidata->mutex); - + busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20); spiflash_done(); @@ -322,15 +322,15 @@ spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) return 0; } -static int +static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) { u8 *read_addr; - + /* sanity checks */ if (!len) return (0); if (from + len > mtd->size) return (-EINVAL); - + /* we always read len bytes */ *retlen = len; @@ -343,7 +343,7 @@ spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_cha return 0; } -static int +static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) { u32 opcode, bytes_left; @@ -353,10 +353,10 @@ spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u /* sanity checks */ if (!len) return (0); if (to + len > mtd->size) return (-EINVAL); - + opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; bytes_left = len; - + do { u32 xact_len, reg, page_offset, spi_data = 0; @@ -389,7 +389,7 @@ spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; break; case 4: - spi_data = (buf[3] << 24) | (buf[2] << 16) | + spi_data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; break; default: @@ -439,7 +439,7 @@ static int spiflash_probe(struct platform_device *pdev) spin_lock_init(&spidata->mutex); init_waitqueue_head(&spidata->wq); spidata->state = FL_READY; - + if (!spidata->mmraddr) { printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); kfree(spidata); @@ -451,7 +451,7 @@ static int spiflash_probe(struct platform_device *pdev) kfree(spidata); return -ENXIO; } - + if (!(index = spiflash_probe_chip())) { printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); goto error; @@ -483,9 +483,9 @@ static int spiflash_probe(struct platform_device *pdev) result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts); spidata->mtd = mtd; - + return (result); - + error: kfree(mtd); kfree(spidata); @@ -505,7 +505,7 @@ struct platform_driver spiflash_driver = { .remove = spiflash_remove, }; -int __init +int __init spiflash_init (void) { spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); @@ -518,7 +518,7 @@ spiflash_init (void) return 0; } -void __exit +void __exit spiflash_exit (void) { kfree(spidata); diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c index 68fcb587be..fb1efa19c1 100644 --- a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c +++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c @@ -14,7 +14,7 @@ * (at your option) any later version. * * Additional credits: - * This code is taken from John Taylor's Sibyte driver and then + * This code is taken from John Taylor's Sibyte driver and then * modified for the AR2313. */ @@ -134,7 +134,7 @@ #define CRC_LEN 4 #define RX_OFFSET 2 -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) #define VLAN_HDR 4 #else #define VLAN_HDR 0 @@ -232,8 +232,8 @@ int __init ar2313_probe(struct platform_device *pdev) return (-ENXIO); } - /* - * When there's only one MAC, PHY regs are typically on ENET0, + /* + * When there's only one MAC, PHY regs are typically on ENET0, * even though the MAC might be on ENET1. * Needto remap PHY regs separately in this case */ @@ -270,7 +270,7 @@ int __init ar2313_probe(struct platform_device *pdev) sp->board_idx = BOARD_IDX_STATIC; if (ar2313_init(dev)) { - /* + /* * ar2313_init() calls ar2313_init_cleanup() on error. */ kfree(dev); @@ -295,7 +295,7 @@ int __init ar2313_probe(struct platform_device *pdev) sp->mii_bus.id = 0; sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); *sp->mii_bus.irq = PHY_POLL; - + mdiobus_register(&sp->mii_bus); if (mdiobus_probe(dev) != 0) { @@ -308,7 +308,7 @@ int __init ar2313_probe(struct platform_device *pdev) /* start link poll timer */ ar2313_setup_timer(dev); } - + return 0; } @@ -379,9 +379,9 @@ static void printMcList(struct net_device *dev) */ static void ar2313_multicast_list(struct net_device *dev) { - /* - * Always listen to broadcasts and - * treat IFF bits independently + /* + * Always listen to broadcasts and + * treat IFF bits independently */ struct ar2313_private *sp = (struct ar2313_private *) dev->priv; unsigned int recognise; @@ -420,7 +420,7 @@ static void rx_tasklet_cleanup(struct net_device *dev) { struct ar2313_private *sp = dev->priv; - /* + /* * Tasklet may be scheduled. Need to get it removed from the list * since we're about to free the struct. */ @@ -442,7 +442,7 @@ static int __exit ar2313_remove(struct platform_device *pdev) /* - * Restart the AR2313 ethernet controller. + * Restart the AR2313 ethernet controller. */ static int ar2313_restart(struct net_device *dev) { @@ -606,7 +606,7 @@ static void ar2313_link_timer_fn(unsigned long data) // autonegotiated value of half or full duplex. ar2313_check_link(dev); - // Loop faster when we don't have link. + // Loop faster when we don't have link. // This was needed to speed up the AP bootstrap time. if (sp->link == 0) { mod_timer(&sp->link_timer, jiffies + HZ / 2); @@ -728,7 +728,7 @@ static int ar2313_init(struct net_device *dev) struct ar2313_private *sp = dev->priv; int ecode = 0; - /* + /* * Allocate descriptors */ if (ar2313_allocate_descriptors(dev)) { @@ -738,7 +738,7 @@ static int ar2313_init(struct net_device *dev) goto init_error; } - /* + /* * Get the memory for the skb rings. */ if (sp->rx_skb == NULL) { @@ -767,7 +767,7 @@ static int ar2313_init(struct net_device *dev) } memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); - /* + /* * Set tx_csm before we start receiving interrupts, otherwise * the interrupt handler might think it is supposed to process * tx ints before we are up and running, which may cause a null @@ -778,23 +778,23 @@ static int ar2313_init(struct net_device *dev) sp->tx_prd = 0; sp->tx_csm = 0; - /* + /* * Zero the stats before starting the interface */ memset(&sp->stats, 0, sizeof(sp->stats)); - /* + /* * We load the ring here as there seem to be no way to tell the * firmware to wipe the ring without re-initializing it. */ ar2313_load_rx_ring(dev, RX_RING_SIZE); - /* + /* * Init hardware */ ar2313_reset_reg(dev); - /* + /* * Get the IRQ */ ecode = @@ -852,7 +852,7 @@ static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) // partha: create additional room in the front for tx pkt capture skb_reserve(skb, 32); - /* + /* * Make sure IP header starts on a fresh cache line. */ skb->dev = dev; @@ -899,7 +899,7 @@ static int ar2313_rx_int(struct net_device *dev) idx = sp->cur_rx; - /* process at most the entire ring and then wait for another interrupt + /* process at most the entire ring and then wait for another interrupt */ while (1) { @@ -1081,7 +1081,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id) unsigned int status, enabled; /* clear interrupt */ - /* + /* * Don't clear RI bit if currently disabled. */ status = sp->dma_regs->status; @@ -1090,7 +1090,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id) if (status & DMA_STATUS_NIS) { /* normal status */ - /* + /* * Don't schedule rx processing if interrupt * is already disabled. */ @@ -1178,12 +1178,12 @@ static void ar2313_halt(struct net_device *dev) static int ar2313_close(struct net_device *dev) { #if 0 - /* + /* * Disable interrupts */ disable_irq(dev->irq); - /* + /* * Without (or before) releasing irq and stopping hardware, this * is an absolute non-sense, by the way. It will be reset instantly * by the first irq. @@ -1251,7 +1251,7 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; struct ar2313_private *sp = dev->priv; int ret; - + switch (cmd) { case SIOCETHTOOL: @@ -1271,12 +1271,12 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) return -EFAULT; return 0; - + case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: return phy_mii_ioctl(sp->phy_dev, data, cmd); - + default: break; } @@ -1314,7 +1314,7 @@ static void ar2313_adjust_link(struct net_device *dev) #define MII_ADDR(phy, reg) \ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) -static int +static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) { struct net_device *const dev = bus->priv; @@ -1326,7 +1326,7 @@ mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) return (ethernet->mii_data >> MII_DATA_SHIFT); } -static int +static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) { diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files/drivers/net/ar2313/ar2313.h index f1868e6c3c..d4299addcd 100644 --- a/target/linux/atheros/files/drivers/net/ar2313/ar2313.h +++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.h @@ -64,7 +64,7 @@ typedef struct { } ETHERNET_STRUCT; /******************************************************************** - * Interrupt controller + * Interrupt controller ********************************************************************/ typedef struct { @@ -118,7 +118,7 @@ struct ar2313_private { spinlock_t lock; /* Serialise access to device */ - /* + /* * RX and TX descriptors, must be adjacent */ ar2313_descr_t *rx_ring; @@ -128,19 +128,19 @@ struct ar2313_private { struct sk_buff **rx_skb; struct sk_buff **tx_skb; - /* + /* * RX elements */ u32 rx_skbprd; u32 cur_rx; - /* + /* * TX elements */ u32 tx_prd; u32 tx_csm; - /* + /* * Misc elements */ int board_idx; diff --git a/target/linux/atheros/files/drivers/net/ar2313/dma.h b/target/linux/atheros/files/drivers/net/ar2313/dma.h index 113827047b..6d478d21fe 100644 --- a/target/linux/atheros/files/drivers/net/ar2313/dma.h +++ b/target/linux/atheros/files/drivers/net/ar2313/dma.h @@ -16,13 +16,13 @@ * $Log: dma.h,v $ * Revision 1.3 2002/06/06 18:34:03 astichte * Added XXX_PhysicalAddress and XXX_VirtualAddress - * + * * Revision 1.2 2002/06/05 18:30:46 astichte * Removed IDTField - * + * * Revision 1.1 2002/05/29 17:33:21 sysarch * jba File moved from vcode/include/idt/acacia - * + * * ******************************************************************************/ diff --git a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5312/ar5312.h index 2b6b875b4f..afa3aefdad 100644 --- a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5312/ar5312.h +++ b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5312/ar5312.h @@ -53,7 +53,7 @@ #define AR531X_RADIO_MASK_OFF 0xc8 #define AR531X_RADIO0_MASK 0x0003 #define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 +#define AR531X_RADIO1_S 2 /* * AR531X_NUM_WMAC defines the number of Wireless MACs that\ diff --git a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5315/ar5315.h b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5315/ar5315.h index 3930cb9053..8ad8810b3c 100644 --- a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5315/ar5315.h +++ b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar5315/ar5315.h @@ -12,7 +12,7 @@ #ifndef AR5315_H #define AR5315_H -/* +/* * IRQs */ #define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ @@ -106,7 +106,7 @@ #define AR5315_CONFIG_CPU_DRAM 0x00010000 #define AR5315_CONFIG_CPU_PCI 0x00020000 #define AR5315_CONFIG_CPU_MMR 0x00040000 -#define AR5315_CONFIG_BIG 0x00000400 +#define AR5315_CONFIG_BIG 0x00000400 /* @@ -141,13 +141,13 @@ #define IF_PCI_HOST 0x00000010 #define IF_PCI_INTR 0x00000020 #define IF_PCI_CLK_MASK 0x00030000 -#define IF_PCI_CLK_INPUT 0 +#define IF_PCI_CLK_INPUT 0 #define IF_PCI_CLK_OUTPUT_LOW 1 #define IF_PCI_CLK_OUTPUT_CLK 2 #define IF_PCI_CLK_OUTPUT_HIGH 3 -#define IF_PCI_CLK_SHIFT 16 - - +#define IF_PCI_CLK_SHIFT 16 + + /* Major revision numbers, bits 7..4 of Revision ID register */ #define REV_MAJ_AR5311 0x01 #define REV_MAJ_AR5312 0x04 @@ -170,7 +170,7 @@ #define AR5315_ISR_GPIO 0x0040 /* GPIO */ #define AR5315_ISR_WD 0x0080 /* watchdog */ #define AR5315_ISR_IR_RSVD 0x0100 /* IR */ - + #define AR5315_GISR_MISC 0x0001 #define AR5315_GISR_WLAN0 0x0002 #define AR5315_GISR_MPEGTS_RSVD 0x0004 @@ -215,7 +215,7 @@ #define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ #define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ #define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ - + #define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ #define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ #define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ @@ -246,7 +246,7 @@ #define PROCERR_HMAST_LOCAL 4 #define PROCERR_HMAST_CPU 5 #define PROCERR_HMAST_PCITGT 6 - + #define PROCERR_HMAST_S 0 #define PROCERR_HWRITE 0x00000010 #define PROCERR_HSIZE 0x00000060 @@ -325,7 +325,7 @@ */ #define ASSOC_STATUS_M 0x00000003 #define ASSOC_STATUS_NONE 0 -#define ASSOC_STATUS_PENDING 1 +#define ASSOC_STATUS_PENDING 1 #define ASSOC_STATUS_ASSOCIATED 2 #define LED_MODE_M 0x0000001c #define LED_BLINK_THRESHOLD_M 0x000000e0 @@ -358,28 +358,28 @@ #define AR5315_RESET_GPIO 5 #define AR5315_NUM_GPIO 22 - -/* + +/* * PCI Clock Control - */ - + */ + #define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4) #define AR5315_PCICLK_INPUT_M 0x3 #define AR5315_PCICLK_INPUT_S 0 - + #define AR5315_PCICLK_PLLC_CLKM 0 #define AR5315_PCICLK_PLLC_CLKM1 1 #define AR5315_PCICLK_PLLC_CLKC 2 -#define AR5315_PCICLK_REF_CLK 3 +#define AR5315_PCICLK_REF_CLK 3 #define AR5315_PCICLK_DIV_M 0xc #define AR5315_PCICLK_DIV_S 2 - + #define AR5315_PCICLK_IN_FREQ 0 #define AR5315_PCICLK_IN_FREQ_DIV_6 1 #define AR5315_PCICLK_IN_FREQ_DIV_8 2 -#define AR5315_PCICLK_IN_FREQ_DIV_10 3 +#define AR5315_PCICLK_IN_FREQ_DIV_10 3 /* * Observation Control Register @@ -389,10 +389,10 @@ #define OCR_GPIO1_IROUT 0x0080 #define OCR_GPIO3_RXCLR 0x0200 -/* +/* * General Clock Control - */ - + */ + #define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4) #define MISCCLK_PLLBYPASS_EN 0x00000001 #define MISCCLK_PROCREFCLK 0x00000002 @@ -435,10 +435,10 @@ #define SPI_CTL_CLK_SEL_MASK 0x03000000 #define SPI_OPCODE_MASK 0x000000ff -/* - * PCI-MAC Configuration registers +/* + * PCI-MAC Configuration registers */ -#define PCI_MAC_RC (AR5315_PCI + 0x4000) +#define PCI_MAC_RC (AR5315_PCI + 0x4000) #define PCI_MAC_SCR (AR5315_PCI + 0x4004) #define PCI_MAC_INTPEND (AR5315_PCI + 0x4008) #define PCI_MAC_SFR (AR5315_PCI + 0x400C) @@ -449,16 +449,16 @@ #define PCI_MAC_RC_BB 0x00000002 #define PCI_MAC_SCR_SLMODE_M 0x00030000 -#define PCI_MAC_SCR_SLMODE_S 16 -#define PCI_MAC_SCR_SLM_FWAKE 0 -#define PCI_MAC_SCR_SLM_FSLEEP 1 -#define PCI_MAC_SCR_SLM_NORMAL 2 +#define PCI_MAC_SCR_SLMODE_S 16 +#define PCI_MAC_SCR_SLM_FWAKE 0 +#define PCI_MAC_SCR_SLM_FSLEEP 1 +#define PCI_MAC_SCR_SLM_NORMAL 2 #define PCI_MAC_SFR_SLEEP 0x00000001 #define PCI_MAC_PCICFG_SPWR_DN 0x00010000 - + /* * PCI Bus Interface Registers */ @@ -516,8 +516,8 @@ #define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ #define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ #define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */ -#define AR5315_PCI_EXT_INT 0x02000000 -#define AR5315_PCI_ABORT_INT 0x04000000 +#define AR5315_PCI_EXT_INT 0x02000000 +#define AR5315_PCI_ABORT_INT 0x04000000 #define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */ @@ -658,10 +658,10 @@ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. */ - + #define CPU_TO_PCI_MEM_BASE1 0xE0000000 #define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) - + /* TLB attributes for PCI transactions */ diff --git a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h index c77d74ec9f..dccf541550 100644 --- a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h +++ b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h @@ -30,11 +30,11 @@ static inline int clz(unsigned long val) : "=r" (ret) : "r" (val) ); - + return ret; } -/* +/* * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime. */ @@ -157,7 +157,7 @@ extern void ar5315_pci_irq(int irq); static inline u32 sysRegMask(u32 phys, u32 mask, u32 value) { u32 reg; - + reg = sysRegRead(phys); reg &= ~mask; reg |= value & mask;