diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2ce489b0d1..e22cee51a3 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -401,10 +401,7 @@ tplink,tl-mr6400-v1)
 	ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1"
 	ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0"
 	;;
-tplink,tl-wpa8630-v1|\
-tplink,tl-wpa8630p-v2-int|\
-tplink,tl-wpa8630p-v2.0-eu|\
-tplink,tl-wpa8630p-v2.1-eu)
+tplink,tl-wpa8630-v1)
 	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
 	;;
 tplink,tl-wr841hp-v2|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index bc32081910..2f0208b288 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -440,10 +440,7 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
 		;;
-	tplink,tl-wpa8630-v1|\
-	tplink,tl-wpa8630p-v2-int|\
-	tplink,tl-wpa8630p-v2.0-eu|\
-	tplink,tl-wpa8630p-v2.1-eu)
+	tplink,tl-wpa8630-v1)
 		# port 5 (internal) is the power-line port
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b8e99a661f..348b8839b6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -249,10 +249,7 @@ case "$FIRMWARE" in
 		;;
 	tplink,eap225-outdoor-v1|\
 	tplink,eap225-v3|\
-	tplink,eap225-wall-v2|\
-	tplink,tl-wpa8630p-v2-int|\
-	tplink,tl-wpa8630p-v2.0-eu|\
-	tplink,tl-wpa8630p-v2.1-eu)
+	tplink,eap225-wall-v2)
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 37a0fcc169..6479f6e26a 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -640,36 +640,6 @@ define Device/tplink_tl-wpa8630-v1
 endef
 TARGET_DEVICES += tplink_tl-wpa8630-v1
 
-define Device/tplink_tl-wpa8630p-v2
-  $(Device/tplink-safeloader)
-  SOC := qca9563
-  DEVICE_MODEL := TL-WPA8630P
-  IMAGE_SIZE := 6016k
-  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
-endef
-
-define Device/tplink_tl-wpa8630p-v2-int
-  $(Device/tplink_tl-wpa8630p-v2)
-  DEVICE_VARIANT := v2 (Int.)
-  TPLINK_BOARD_ID := TL-WPA8630P-V2-INT
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2-int
-
-define Device/tplink_tl-wpa8630p-v2.0-eu
-  $(Device/tplink_tl-wpa8630p-v2)
-  DEVICE_VARIANT := v2.0 (EU)
-  TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU
-  SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu
-
-define Device/tplink_tl-wpa8630p-v2.1-eu
-  $(Device/tplink_tl-wpa8630p-v2)
-  DEVICE_VARIANT := v2.1 (EU)
-  TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu
-
 define Device/tplink_tl-wr1043nd-v1
   $(Device/tplink-8m)
   SOC := ar9132
diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk
index c918c6baa6..2110f08b52 100644
--- a/target/linux/ath79/image/tiny-tp-link.mk
+++ b/target/linux/ath79/image/tiny-tp-link.mk
@@ -223,6 +223,41 @@ define Device/tplink_tl-wa901nd-v5
 endef
 TARGET_DEVICES += tplink_tl-wa901nd-v5
 
+define Device/tplink_tl-wpa8630p-v2
+  $(Device/tplink-safeloader)
+  SOC := qca9563
+  DEVICE_MODEL := TL-WPA8630P
+  IMAGE_SIZE := 6016k
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+  DEVICE_COMPAT_VERSION := 2.0
+  DEVICE_COMPAT_MESSAGE := The flash erase blocksize has changed to 4k from the 64k in previous versions, \
+    so the JFFS2 settings partition MUST be reformatted to avoid data corruption. \
+    Backup your settings before upgrading, then during sysupgrade, \
+    de-select "Keep settings" and select "Force" to continue (equivilant to "sysupgrade -n -F").
+endef
+
+define Device/tplink_tl-wpa8630p-v2-int
+  $(Device/tplink_tl-wpa8630p-v2)
+  DEVICE_VARIANT := v2 (Int.)
+  TPLINK_BOARD_ID := TL-WPA8630P-V2-INT
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2-int
+
+define Device/tplink_tl-wpa8630p-v2.0-eu
+  $(Device/tplink_tl-wpa8630p-v2)
+  DEVICE_VARIANT := v2.0 (EU)
+  TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU
+  SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu
+
+define Device/tplink_tl-wpa8630p-v2.1-eu
+  $(Device/tplink_tl-wpa8630p-v2)
+  DEVICE_VARIANT := v2.1 (EU)
+  TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu
+
 define Device/tplink_tl-wr703n
   $(Device/tplink-4mlzma)
   SOC := ar9331
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
index 72df8b3dea..f705c5c718 100644
--- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
@@ -93,6 +93,11 @@ tplink,tl-wa850re-v2)
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:signal4" "wlan0" "60" "100"
 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:signal5" "wlan0" "80" "100"
 	;;
+tplink,tl-wpa8630p-v2-int|\
+tplink,tl-wpa8630p-v2.0-eu|\
+tplink,tl-wpa8630p-v2.1-eu)
+	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
+	;;
 tplink,tl-wr940n-v3|\
 tplink,tl-wr940n-v4|\
 tplink,tl-wr941nd-v6)
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index 45335c7c89..77b2444819 100644
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -82,6 +82,13 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 		;;
+	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
+	tplink,tl-wpa8630p-v2.1-eu)
+		# port 5 (internal) is the power-line port
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+		;;
 	tplink,tl-wr941-v2)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 		;;
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version
new file mode 100644
index 0000000000..b6c2ae48f7
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
+	tplink,tl-wpa8630p-v2.1-eu)
+		ucidef_set_compat_version "2.0"
+		;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..8e3e142ec9
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+	case $board in
+	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
+	tplink,tl-wpa8630p-v2.1-eu)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac