hostapd: backport a few upstream fixes

Fixes reassoc issues with WDS mode
Fixes reassoc issues in AP mode
Fixes IBSS reauthentication issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau 2017-01-15 14:19:43 +01:00
parent a206394efa
commit 40e4c342fd
5 changed files with 163 additions and 4 deletions

View File

@ -0,0 +1,83 @@
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue, 20 Dec 2016 01:30:09 +0200
Subject: [PATCH] Fix race condition between AssocResp callback and 4addr event
It is apparently possible for the NL80211_CMD_UNEXPECTED_4ADDR_FRAME
event to be delivered to hostapd before the NL80211_CMD_FRAME_TX_STATUS
event for (Re)Association Response frame. This resulted in the 4-address
WDS mode not getting enabled for a STA. This could occur in particular
when operating under heavy load and the STA is reconnecting to the same
AP in a sequence where Deauthentication frame is followed immediately by
Authentication frame and the driver event processing gets delayed due to
removal of the previous netdev taking time in the middle of this
sequence.
Fix this by recording a pending item for 4-address WDS enabling if the
NL80211_CMD_UNEXPECTED_4ADDR_FRAME event would have been dropped due to
incompleted association and then process this pending item if the TX
status for the (Re)Association Response frame is received and it shows
that the frame was acknowledged.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
---
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -2634,6 +2634,8 @@ static void handle_assoc(struct hostapd_
taxonomy_sta_info_assoc_req(hapd, sta, pos, left);
#endif /* CONFIG_TAXONOMY */
+ sta->pending_wds_enable = 0;
+
fail:
/*
* In case of a successful response, add the station to the driver.
@@ -3248,6 +3250,14 @@ static void handle_assoc_cb(struct hosta
hostapd_set_sta_flags(hapd, sta);
+ if (!(sta->flags & WLAN_STA_WDS) && sta->pending_wds_enable) {
+ wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for STA "
+ MACSTR " based on pending request",
+ MAC2STR(sta->addr));
+ sta->pending_wds_enable = 0;
+ sta->flags |= WLAN_STA_WDS;
+ }
+
if (sta->flags & WLAN_STA_WDS) {
int ret;
char ifname_wds[IFNAMSIZ + 1];
@@ -3512,10 +3522,22 @@ void ieee802_11_rx_from_unknown(struct h
struct sta_info *sta;
sta = ap_get_sta(hapd, src);
- if (sta && (sta->flags & WLAN_STA_ASSOC)) {
+ if (sta &&
+ ((sta->flags & WLAN_STA_ASSOC) ||
+ ((sta->flags & WLAN_STA_ASSOC_REQ_OK) && wds))) {
if (!hapd->conf->wds_sta)
return;
+ if ((sta->flags & (WLAN_STA_ASSOC | WLAN_STA_ASSOC_REQ_OK)) ==
+ WLAN_STA_ASSOC_REQ_OK) {
+ wpa_printf(MSG_DEBUG,
+ "Postpone 4-address WDS mode enabling for STA "
+ MACSTR " since TX status for AssocResp is not yet known",
+ MAC2STR(sta->addr));
+ sta->pending_wds_enable = 1;
+ return;
+ }
+
if (wds && !(sta->flags & WLAN_STA_WDS)) {
int ret;
char ifname_wds[IFNAMSIZ + 1];
--- a/src/ap/sta_info.h
+++ b/src/ap/sta_info.h
@@ -115,6 +115,7 @@ struct sta_info {
unsigned int radius_das_match:1;
unsigned int ecsa_supported:1;
unsigned int added_unassoc:1;
+ unsigned int pending_wds_enable:1;
u16 auth_alg;

View File

@ -0,0 +1,36 @@
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Sat, 14 Jan 2017 01:04:31 +0200
Subject: [PATCH] Fix duplicate Reassociation Request frame dropping
Relational operators (==) have higher precedence than the ternary
conditional in C. The last_subtype check for association/reassociation
was broken due to incorrect assumption about the precedence. Fix this by
adding parenthesis around the ternary conditional.
The previous implementation worked for Association Request frames by
accident since WLAN_FC_STYPE_ASSOC_REQ happens to have value 0 and when
the last receive frame was an Association Request frame, the
sta->last_subtype == reassoc check was true and non-zero
WLAN_FC_STYPE_REASSOC_REQ was interpreted as true. However, this was
broken for Reassociation Request frame. reassoc == 1 in that case could
have matched received Association Response frame (subtype == 1), but
those are not received in AP mode and as such, this did not break other
behavior apart from not being able to drop duplicated Reassociation
Request frames.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
---
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -2485,8 +2485,8 @@ static void handle_assoc(struct hostapd_
if ((fc & WLAN_FC_RETRY) &&
sta->last_seq_ctrl != WLAN_INVALID_MGMT_SEQ &&
sta->last_seq_ctrl == seq_ctrl &&
- sta->last_subtype == reassoc ? WLAN_FC_STYPE_REASSOC_REQ :
- WLAN_FC_STYPE_ASSOC_REQ) {
+ sta->last_subtype == (reassoc ? WLAN_FC_STYPE_REASSOC_REQ :
+ WLAN_FC_STYPE_ASSOC_REQ)) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"Drop repeated association frame seq_ctrl=0x%x",

View File

@ -0,0 +1,40 @@
From: Jouni Malinen <j@w1.fi>
Date: Sat, 14 Jan 2017 13:56:18 +0200
Subject: [PATCH] RSN IBSS: Fix TK clearing on Authentication frame RX
When wpa_supplicant was processing a received Authentication frame (seq
1) from a peer STA for which there was already a TK configured to the
driver, debug log claimed that the PTK gets cleared, but the actual
call to clear the key was actually dropped due to AUTH vs. SUPP set_key
selection. Fix this by explicitly clearing the TK in case it was set
and an Authentication frame (seq 1) is received.
This fixes some cases where EAPOL-Key frames were sent encrypted using
the old key when a peer STA restarted itself and lost the key and had to
re-join the IBSS. Previously, that state required timing out the 4-way
handshake and Deauthentication frame exchange to recover.
Signed-off-by: Jouni Malinen <j@w1.fi>
---
--- a/wpa_supplicant/ibss_rsn.c
+++ b/wpa_supplicant/ibss_rsn.c
@@ -838,6 +838,18 @@ static void ibss_rsn_handle_auth_1_of_2(
MAC2STR(addr));
if (peer &&
+ peer->authentication_status & (IBSS_RSN_SET_PTK_SUPP |
+ IBSS_RSN_SET_PTK_AUTH)) {
+ /* Clear the TK for this pair to allow recovery from the case
+ * where the peer STA has restarted and lost its key while we
+ * still have a pairwise key configured. */
+ wpa_printf(MSG_DEBUG, "RSN: Clear pairwise key for peer "
+ MACSTR, MAC2STR(addr));
+ wpa_drv_set_key(ibss_rsn->wpa_s, WPA_ALG_NONE, addr, 0, 0,
+ NULL, 0, NULL, 0);
+ }
+
+ if (peer &&
peer->authentication_status & IBSS_RSN_AUTH_EAPOL_BY_PEER) {
if (peer->own_auth_tx.sec) {
struct os_reltime now, diff;

View File

@ -60,13 +60,13 @@
+ if (chdir("/") < 0)
return -1;
- }
-
- return 0;
-}
-#else /* __APPLE__ */
-#define os_daemon daemon
-#endif /* __APPLE__ */
-
-
-int os_daemonize(const char *pid_file)
-{

View File

@ -156,7 +156,7 @@
/*
* sta->capability is used in check_assoc_ies() for RRM enabled
* capability element.
@@ -3023,7 +3049,7 @@ int ieee802_11_mgmt(struct hostapd_data
@@ -3025,7 +3051,7 @@ int ieee802_11_mgmt(struct hostapd_data
if (stype == WLAN_FC_STYPE_PROBE_REQ) {
@ -165,7 +165,7 @@
return 1;
}
@@ -3041,17 +3067,17 @@ int ieee802_11_mgmt(struct hostapd_data
@@ -3043,17 +3069,17 @@ int ieee802_11_mgmt(struct hostapd_data
switch (stype) {
case WLAN_FC_STYPE_AUTH:
wpa_printf(MSG_DEBUG, "mgmt::auth");