mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-13 10:49:13 +02:00
qoriq: add support for WatchGuard Firebox M300
This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
This commit is contained in:
Stijn Tintel
parent
080a769b4d
commit
3fda16078b
19
package/boot/uboot-envtools/files/qoriq
Normal file
19
package/boot/uboot-envtools/files/qoriq
Normal file
|
|
@ -0,0 +1,19 @@
|
|||
[ -e /etc/config/ubootenv ] && exit 0
|
||||
|
||||
touch /etc/config/ubootenv
|
||||
|
||||
. /lib/uboot-envtools.sh
|
||||
. /lib/functions.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
watchguard,firebox-m300)
|
||||
ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x2000" "0x10000"
|
||||
;;
|
||||
esac
|
||||
|
||||
config_load ubootenv
|
||||
config_foreach ubootenv_add_app_config ubootenv
|
||||
|
||||
exit 0
|
||||
38
target/linux/qoriq/base-files/etc/board.d/02_network
Normal file
38
target/linux/qoriq/base-files/etc/board.d/02_network
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
|
||||
wg_set_opt_interface() {
|
||||
local device="$1"
|
||||
local offset="$2"
|
||||
|
||||
ucidef_set_interface "$device" device "$device" protocol static ipaddr "10.0.${offset}.1" netmask 255.255.255.0
|
||||
}
|
||||
|
||||
case "$board" in
|
||||
watchguard,firebox-m300)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
wg_set_opt_interface "eth2" "2"
|
||||
|
||||
sweth_mac_offset=0x186d
|
||||
|
||||
for sweth in /sys/class/net/sweth*; do
|
||||
device="$(basename "$sweth")"
|
||||
mac="$(mtd_get_mac_text wg_cfg0 "$sweth_mac_offset")"
|
||||
switchports="$switchports $device"
|
||||
ucidef_set_network_device_mac "$device" "$mac"
|
||||
wg_set_opt_interface "$device" "${device#sweth}"
|
||||
sweth_mac_offset=$(printf "0x%X\n" $(( $sweth_mac_offset + 0x14)))
|
||||
done
|
||||
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
17
target/linux/qoriq/base-files/lib/preinit/79_move_config
Normal file
17
target/linux/qoriq/base-files/lib/preinit/79_move_config
Normal file
|
|
@ -0,0 +1,17 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/upgrade/common.sh
|
||||
|
||||
move_config() {
|
||||
local partdev
|
||||
|
||||
if export_bootdevice && export_partdevice partdev 1; then
|
||||
mkdir -p /boot
|
||||
mount -o rw,noatime "/dev/$partdev" /boot
|
||||
[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
|
||||
umount /boot
|
||||
fi
|
||||
}
|
||||
|
||||
boot_hook_add preinit_mount_root move_config
|
||||
36
target/linux/qoriq/base-files/lib/upgrade/platform.sh
Executable file
36
target/linux/qoriq/base-files/lib/upgrade/platform.sh
Executable file
|
|
@ -0,0 +1,36 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
case "$(board_name)" in
|
||||
watchguard,firebox-m300)
|
||||
legacy_sdcard_check_image "$1"
|
||||
;;
|
||||
*)
|
||||
return 0
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
platform_copy_config() {
|
||||
case "$(board_name)" in
|
||||
watchguard,firebox-m300)
|
||||
legacy_sdcard_copy_config "$1"
|
||||
;;
|
||||
*)
|
||||
return 0
|
||||
esac
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
watchguard,firebox-m300)
|
||||
legacy_sdcard_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
|
@ -0,0 +1,328 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
|
||||
/*
|
||||
* WatchGuard Firebox M300 Device Tree Source
|
||||
* Based on t2081qds.dts from Linux 5.10
|
||||
*
|
||||
* Copyright 2013 - 2015 Freescale Semiconductor Inc.
|
||||
* Copyright 2020 - 2021 Stijn Tintel <stijn@linux-ipv6.be>
|
||||
*/
|
||||
|
||||
/include/ "t208xsi-pre.dtsi"
|
||||
/include/ "t208xqds.dtsi"
|
||||
|
||||
/ {
|
||||
model = "WatchGuard Firebox M300";
|
||||
compatible = "watchguard,firebox-m300", "fsl,T2081QDS";
|
||||
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
/delete-property/ ethernet0;
|
||||
/delete-property/ ethernet1;
|
||||
/delete-property/ ethernet2;
|
||||
/delete-property/ ethernet3;
|
||||
/delete-property/ ethernet4;
|
||||
/delete-property/ ethernet5;
|
||||
/delete-property/ ethernet6;
|
||||
/delete-property/ ethernet7;
|
||||
|
||||
ethernet0 = &enet7;
|
||||
ethernet1 = &enet0;
|
||||
ethernet2 = &enet1;
|
||||
ethernet3 = &enet2;
|
||||
ethernet4 = &enet3;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
// Include first to make this the first interface
|
||||
/include/ "qoriq-fman3-0-10g-1.dtsi"
|
||||
};
|
||||
|
||||
// mdio-mux under &boardctrl + its aliases removed. causes crash:
|
||||
// Oops: Machine check, sig: 7 [#1]
|
||||
|
||||
/include/ "t2081si-post.dtsi"
|
||||
|
||||
// add stuff below the include to make sure we override whatever is there
|
||||
|
||||
&enet0 {
|
||||
phy-connection-type = "sgmii";
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
&enet1 {
|
||||
phy-connection-type = "sgmii";
|
||||
phy-handle = <&phy2>;
|
||||
};
|
||||
|
||||
&enet2 {
|
||||
phy-connection-type = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&enet3 {
|
||||
phy-connection-type = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&enet4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&enet5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&enet6 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&enet7 {
|
||||
phy-connection-type = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&ifc {
|
||||
ranges = <0x00 0x00 0x0f 0xefc00000 0x400000>;
|
||||
|
||||
nor@0,0 {
|
||||
reg = <0x00 0x00 0x400000>;
|
||||
|
||||
partition@0{
|
||||
reg = <0x0 0x10000>;
|
||||
label = "qoriq-rcw";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
reg = <0x10000 0x20000>;
|
||||
label = "wg_cfg0";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
reg = <0x30000 0x10000>;
|
||||
label = "wg_cfg1";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
reg = <0x40000 0x10000>;
|
||||
label = "wg_mfg_data";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
reg = <0x50000 0xb0000>;
|
||||
label = "wg_bootopt_data_and_reserved";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
reg = <0x100000 0xb0000>;
|
||||
label = "wg_extra_reserved_1";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1B0000 {
|
||||
reg = <0x1b0000 0xb0000>;
|
||||
label = "wg_extra_reserved_2";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@260000 {
|
||||
reg = <0x260000 0xc0000>;
|
||||
label = "wg_u-boot_failsafe";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@320000 {
|
||||
reg = <0x320000 0x10000>;
|
||||
label = "qoriq-fman";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@330000 {
|
||||
reg = <0x330000 0x10000>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
|
||||
partition@340000 {
|
||||
reg = <0x340000 0xc0000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
// m300 ethernet port 0
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x00>;
|
||||
};
|
||||
|
||||
// m300 ethernet port 1
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <0x01>;
|
||||
};
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
reg = <0x02>;
|
||||
};
|
||||
|
||||
phy3: ethernet-phy@3 {
|
||||
reg = <0x03>;
|
||||
};
|
||||
|
||||
switch0: switch@10 {
|
||||
compatible = "marvell,mv88e6085";
|
||||
reg = <0x10>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch0phy0: switch0phy0@0 {
|
||||
reg = <0x00>;
|
||||
interrupt-parent = <&switch0>;
|
||||
};
|
||||
|
||||
switch0phy1: switch0phy1@1 {
|
||||
reg = <0x01>;
|
||||
interrupt-parent = <&switch0>;
|
||||
};
|
||||
|
||||
switch0phy2: switch0phy2@2 {
|
||||
reg = <0x02>;
|
||||
interrupt-parent = <&switch0>;
|
||||
};
|
||||
|
||||
switch0phy3: switch0phy3@3 {
|
||||
reg = <0x03>;
|
||||
interrupt-parent = <&switch0>;
|
||||
};
|
||||
|
||||
switch0phy4: switch0phy4@4 {
|
||||
reg = <0x04>;
|
||||
interrupt-parent = <&switch0>;
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "sweth3";
|
||||
phy-handle = <&switch0phy0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "sweth4";
|
||||
phy-handle = <&switch0phy1>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "sweth5";
|
||||
phy-handle = <&switch0phy2>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "sweth6";
|
||||
phy-handle = <&switch0phy3>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "sweth7";
|
||||
phy-handle = <&switch0phy4>;
|
||||
};
|
||||
|
||||
// OEM bootlog suggests multiple ports are attached to switch
|
||||
// Keep this until OEM supplies GPL sources
|
||||
port@5 {
|
||||
status = "disabled";
|
||||
|
||||
reg = "<5>";
|
||||
label = "cpu";
|
||||
ethernet = <&enet2>;
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&enet3>;
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
i2c@118000 {
|
||||
tpm@29 {
|
||||
compatible = "tpm,tpm_i2c_atmel";
|
||||
reg = <0x29>;
|
||||
};
|
||||
hwmon@2c {
|
||||
compatible = "winbond,w83793";
|
||||
reg = <0x2c>;
|
||||
};
|
||||
hwmon@2d {
|
||||
compatible = "winbond,w83793";
|
||||
reg = <0x2d>;
|
||||
};
|
||||
rtc@32 {
|
||||
compatible = "ricoh,rs5c372a";
|
||||
reg = <0x32>;
|
||||
};
|
||||
pca9547@77 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
spi@110000 {
|
||||
// DTS decompiled from OEM DTB contains flash@0 but doesn't work
|
||||
// spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
|
||||
// disable for now
|
||||
flash@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
flash@1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
flash@2 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
define Device/watchguard_firebox-m300
|
||||
DEVICE_VENDOR := WatchGuard
|
||||
DEVICE_MODEL := Firebox M300
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
|
||||
DEVICE_PACKAGES := \
|
||||
kmod-hwmon-w83793 kmod-ptp-qoriq kmod-rtc-rs5c372a kmod-tpm-i2c-atmel
|
||||
KERNEL := kernel-bin | gzip | uImage gzip
|
||||
IMAGES := sdcard.img.gz sysupgrade.img.gz
|
||||
IMAGE/sysupgrade.img.gz := sdcard-img | gzip | append-metadata
|
||||
IMAGE/sdcard.img.gz := sdcard-img | gzip
|
||||
endef
|
||||
TARGET_DEVICES += watchguard_firebox-m300
|
||||
Loading…
Reference in New Issue
Block a user