ramips: add support for TP-Link TL-WR841n v14

TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N.

- MediaTek MT7628NN
- 32 MB of RAM
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet

Installation:
- copy the
  'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin'
  file to your tftp server root and rename it to 'tp_recovery.bin'.
- configure your PC running the TFTP server with the static IP address
  192.168.0.66/24
- push the reset button and plug in the power connector. Wait until
  the orange led starts blinking (~6sec)

Signed-off-by: Alexander Müller <donothingloop@gmail.com>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
This commit is contained in:
Alexander Müller 2018-11-27 15:32:18 +01:00 committed by Alexander Couzens
parent cc1147072d
commit 3fd97c522b
No known key found for this signature in database
GPG Key ID: C29E9DA6A0DF8604
4 changed files with 155 additions and 0 deletions

View File

@ -326,6 +326,10 @@ tl-wr841n-v13)
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tplink,tl-wr841n-v14)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tplink,c2-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"

View File

@ -246,6 +246,7 @@ ramips_setup_interfaces()
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
tplink,tl-wr841n-v14|\
u7628-01-128M-16M|\
ubnt-erx|\
ubnt-erx-sfp|\

View File

@ -0,0 +1,136 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
model = "TP-Link TL-WR841N v14";
aliases {
led-boot = &led_wlan;
led-failsafe = &led_wlan;
led-upgrade = &led_wlan;
led-wlan = &led_wlan;
};
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "tl-wr841n-v14:green:lan";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
wan_green {
label = "tl-wr841n-v14:green:wan";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
led_wlan: wlan {
label = "tl-wr841n-v14:green:wlan";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_orange {
label = "tl-wr841n-v14:orange:wan";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x10000 0x3e0000>;
};
factory: partition@3f0000 {
label = "factory";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&ehci {
status = "disabled";
};
&ohci {
status = "disabled";
};
&wmac {
status = "okay";
mtd-mac-address = <&factory 0xf100>;
mediatek,mtd-eeprom = <&factory 0x10000>;
};
&ethernet {
mtd-mac-address = <&factory 0xf100>;
mediatek,portmap = "wllll";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
ralink,function = "gpio";
};
};
};
&gpio1 {
led_wlan_enable {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
};
};

View File

@ -259,6 +259,20 @@ define Device/tl-wr841n-v13
endef
TARGET_DEVICES += tl-wr841n-v13
define Device/tplink_tl-wr841n-v14
$(Device/tplink)
DTS := TL-WR841NV14
IMAGE_SIZE := 3968k
DEVICE_TITLE := TP-Link TL-WR841N v14
TPLINK_FLASHLAYOUT := 4Mmtk
TPLINK_HWID := 0x08410014
TPLINK_HWREV := 0x1
TPLINK_HWREVADD := 0x14
TPLINK_HVERSION := 3
IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin)
endef
TARGET_DEVICES += tplink_tl-wr841n-v14
define Device/tplink_c20-v4
$(Device/tplink)
DTS := ArcherC20v4