ipq40xx: add support for MikroTik hAP ac3
This adds support for the MikroTik RouterBOARD RBD53iG-5HacD2HnD (hAP ac³), a indoor dual band, dual-radio 802.11ac wireless AP with external omnidirectional antennae, USB port, five 10/100/1000 Mbps Ethernet ports and PoE passthrough. See https://mikrotik.com/product/hap_ac3 for more info. Specifications: - SoC: Qualcomm Atheros IPQ4019 - RAM: 256 MB - Storage: 16 MB NOR + 128 MB NAND - Wireless: · Built-in IPQ4019 (SoC) 802.11b/g/n 2x2:2, 3 dBi antennae · Built-in IPQ4019 (SoC) 802.11a/n/ac 2x2:2, 5.5 dBi antennae - Ethernet: Built-in IPQ4019 (SoC, QCA8075) , 5x 1000/100/10 port, passive PoE in, PoE passtrough on port 5 - 1x USB Type A port Installation: 1. Boot the initramfs image via TFTP 2. Run "cat /proc/mtd" and look for "ubi" partition mtd device number, ex. "mtd1" 3. Use ubiformat to remove MikroTik specific UBI volumes * Detach the UBI partition by running: "ubidetach -d 0" * Format the partition by running: "ubiformat /dev/mtdN -y" Replace mtdN with the correct mtd index from step 2. 3. Flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Robert Marko <robimarko@gmail.com> Tested-by: Mark Birss <markbirss@gmail.com> Tested-by: Michael Büchler <michael.buechler@posteo.net> Tested-by: Alex Tomkins <tomkins@darkzone.net>
This commit is contained in:
Robert Marko
Hauke Mehrtens
parent
f2c4064ecb
commit
3ad229db0b
|
|
@ -44,6 +44,7 @@ ALLWIFIBOARDS:= \
|
|||
linksys_mr8300-v0 \
|
||||
luma_wrtq-329acn \
|
||||
mikrotik_hap-ac2 \
|
||||
mikrotik_hap-ac3 \
|
||||
mikrotik_sxtsq-5-ac \
|
||||
mobipromo_cm520-79f \
|
||||
nec_wg2600hp3 \
|
||||
|
|
@ -130,6 +131,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
|
|||
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
|
||||
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
|
||||
$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
|
||||
$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac3,Mikrotik hAP ac3))
|
||||
$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
|
||||
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
|
||||
$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -45,6 +45,14 @@ engenius,ens620ext)
|
|||
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
|
||||
;;
|
||||
mikrotik,hap-ac3)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
|
||||
ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
|
||||
;;
|
||||
mikrotik,sxtsq-5-ac)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@ ipq40xx_setup_interfaces()
|
|||
;;
|
||||
asus,rt-ac58u|\
|
||||
mikrotik,hap-ac2|\
|
||||
mikrotik,hap-ac3|\
|
||||
p2w,r619ac-64m|\
|
||||
p2w,r619ac-128m|\
|
||||
zyxel,nbg6617)
|
||||
|
|
@ -182,7 +183,8 @@ ipq40xx_setup_macs()
|
|||
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
mikrotik,hap-ac2)
|
||||
mikrotik,hap-ac2|\
|
||||
mikrotik,hap-ac3)
|
||||
wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
|
||||
lan_mac=$(macaddr_add $wan_mac 1)
|
||||
label_mac="$wan_mac"
|
||||
|
|
|
|||
|
|
@ -18,6 +18,9 @@ cilab,meshpoint-one)
|
|||
compex,wpj428)
|
||||
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
|
||||
;;
|
||||
mikrotik,hap-ac3)
|
||||
ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "452" "0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
|
|
|||
|
|
@ -149,7 +149,8 @@ case "$FIRMWARE" in
|
|||
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
|
||||
;;
|
||||
mikrotik,hap-ac2)
|
||||
mikrotik,hap-ac2 |\
|
||||
mikrotik,hap-ac3)
|
||||
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
|
||||
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
|
||||
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
|
||||
|
|
@ -266,7 +267,8 @@ case "$FIRMWARE" in
|
|||
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
|
||||
;;
|
||||
mikrotik,hap-ac2|\
|
||||
mikrotik,hap-ac2 |\
|
||||
mikrotik,hap-ac3 |\
|
||||
mikrotik,sxtsq-5-ac)
|
||||
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
|
||||
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
|
||||
|
|
|
|||
|
|
@ -55,6 +55,24 @@ zyxel_do_upgrade() {
|
|||
fi
|
||||
}
|
||||
|
||||
platform_do_upgrade_mikrotik_nand() {
|
||||
local fw_mtd=$(find_mtd_part kernel)
|
||||
fw_mtd="${fw_mtd/block/}"
|
||||
[ -n "$fw_mtd" ] || return
|
||||
|
||||
local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
[ -n "$board_dir" ] || return
|
||||
|
||||
local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
|
||||
[ -n "$kernel_len" ] || return
|
||||
|
||||
tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
|
||||
|
||||
CI_KERNPART="none"
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
8dev,jalapeno |\
|
||||
|
|
@ -119,6 +137,9 @@ platform_do_upgrade() {
|
|||
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
mikrotik,hap-ac3)
|
||||
platform_do_upgrade_mikrotik_nand "$1"
|
||||
;;
|
||||
netgear,rbr50 |\
|
||||
netgear,rbs50 |\
|
||||
netgear,srr60 |\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,328 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "MikroTik hAP ac3";
|
||||
compatible = "mikrotik,hap-ac3";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_red;
|
||||
};
|
||||
|
||||
soc {
|
||||
rng@22000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
counter@4a1000 {
|
||||
compatible = "qcom,qca-gcnt";
|
||||
reg = <0x4a1000 0x4>;
|
||||
};
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
tcsr@194b000 {
|
||||
/* select hostmode */
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
usb2: usb2@60f8800 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
mode {
|
||||
label = "mode";
|
||||
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
led {
|
||||
label = "led";
|
||||
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_blue: status-blue {
|
||||
label = "blue:status";
|
||||
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_red: status-red {
|
||||
label = "red:status";
|
||||
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led_status_green: status-green {
|
||||
label = "green:status";
|
||||
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "green:wlan";
|
||||
gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
ethernet {
|
||||
label = "green:ethernet";
|
||||
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "green:wan";
|
||||
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "green:lan1";
|
||||
gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "green:lan2";
|
||||
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "green:lan3";
|
||||
gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "green:lan4";
|
||||
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
poe {
|
||||
label = "red:poe";
|
||||
gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
serial_pins: serial_pinmux {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "blsp_uart0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi_0_pinmux {
|
||||
pin {
|
||||
function = "blsp_spi0";
|
||||
pins = "gpio13", "gpio14", "gpio15";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pin_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio12";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
pullups {
|
||||
pins = "gpio53", "gpio58", "gpio59";
|
||||
function = "qpic";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pulldowns {
|
||||
pins = "gpio55", "gpio56", "gpio57", "gpio60",
|
||||
"gpio62", "gpio63", "gpio64", "gpio65",
|
||||
"gpio66", "gpio67", "gpio68", "gpio69";
|
||||
function = "qpic";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
enable-usb-power {
|
||||
gpio-hog;
|
||||
gpios = <44 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "enable USB power";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
reg = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Qualcomm";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
compatible = "mikrotik,routerboot-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
label = "RouterBoot";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
|
||||
hard_config {
|
||||
read-only;
|
||||
size = <0x2000>;
|
||||
};
|
||||
|
||||
dtb_config {
|
||||
read-only;
|
||||
};
|
||||
|
||||
soft_config {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0xa00000>;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "ubi";
|
||||
reg = <0xa00000 0x7600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&serial_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
|
||||
};
|
||||
|
|
@ -10,6 +10,16 @@ define Device/mikrotik_nor
|
|||
check-size | append-metadata
|
||||
endef
|
||||
|
||||
define Device/mikrotik_nand
|
||||
DEVICE_VENDOR := MikroTik
|
||||
KERNEL_NAME := vmlinux
|
||||
KERNEL_INITRAMFS := kernel-bin | append-dtb-elf
|
||||
KERNEL := kernel-bin | append-dtb-elf | package-kernel-ubifs | \
|
||||
ubinize-kernel
|
||||
IMAGES := nand-sysupgrade.bin
|
||||
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/mikrotik_hap-ac2
|
||||
$(call Device/mikrotik_nor)
|
||||
DEVICE_MODEL := hAP ac2
|
||||
|
|
@ -19,6 +29,17 @@ define Device/mikrotik_hap-ac2
|
|||
endef
|
||||
TARGET_DEVICES += mikrotik_hap-ac2
|
||||
|
||||
define Device/mikrotik_hap-ac3
|
||||
$(call Device/mikrotik_nand)
|
||||
DEVICE_MODEL := hAP ac3
|
||||
SOC := qcom-ipq4019
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c $$(PAGESIZE) -x none
|
||||
DEVICE_PACKAGES := kmod-ledtrig-gpio ipq-wifi-mikrotik_hap-ac3
|
||||
endef
|
||||
TARGET_DEVICES += mikrotik_hap-ac3
|
||||
|
||||
define Device/mikrotik_sxtsq-5-ac
|
||||
$(call Device/mikrotik_nor)
|
||||
DEVICE_MODEL := SXTsq 5 ac (RBSXTsqG-5acD)
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -902,11 +902,67 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -902,11 +902,68 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8074-dragonboard.dtb \
|
||||
qcom-apq8084-ifc6540.dtb \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
|
|
@ -55,6 +55,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
+ qcom-ipq4019-fritzrepeater-1200.dtb \
|
||||
+ qcom-ipq4019-fritzrepeater-3000.dtb \
|
||||
+ qcom-ipq4019-habanero-dvk.dtb \
|
||||
+ qcom-ipq4019-hap-ac3.dtb \
|
||||
+ qcom-ipq4019-map-ac2200.dtb \
|
||||
+ qcom-ipq4019-mr8300.dtb \
|
||||
+ qcom-ipq4019-pa2200.dtb \
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -837,11 +837,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -837,11 +837,66 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8074-dragonboard.dtb \
|
||||
qcom-apq8084-ifc6540.dtb \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
|
|
@ -52,6 +52,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
|||
+ qcom-ipq4019-fritzbox-7530.dtb \
|
||||
+ qcom-ipq4019-fritzrepeater-1200.dtb \
|
||||
+ qcom-ipq4019-fritzrepeater-3000.dtb \
|
||||
+ qcom-ipq4019-hap-ac3.dtb \
|
||||
+ qcom-ipq4019-map-ac2200.dtb \
|
||||
+ qcom-ipq4019-mr8300.dtb \
|
||||
+ qcom-ipq4019-e2600ac-c1.dtb \
|
||||
|
|
|
|||
Loading…
Reference in New Issue