ath79: add support for EnGenius ECB1750
Specification: - Qualcomm Atheros SoC QCA9558 - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 1x 10/100/1000 Mbps Ethernet - 3T3R 2.4 GHz (QCA9558 WMAC) - 3T3R 5.8 Ghz (QCA9880-BR4A, Senao PCE4553AH) https://fccid.io/A8J-ECB1750 Tested and working: - lan, wireless, leds, sysupgrade (tftp) Flash instructions: 1.) tftp recovery - use a 1GbE switch or direct attached 1GbE link - setup client ip address 192.168.1.10 and start tftpd - save "openwrt-ath79-generic-engenius_ecb1750-initramfs-kernel.bin" as "ap.bin" in tfpd root directory - plugin powercord and hold reset button 10secs.. "ap.bin" will be downloaded and executed - afterwards login via ssh and do a sysuprade 2.) oem webinterface factory install (not tested) Use normal webinterface upgrade page und select "openwrt-ath79-generic-engenius_ecb1750-squashfs-factory.bin". 3.) oem webinterface command injection OEM Firmware already running OpenWrt (Attitude Adjustment 12.09). Use OEM webinterface and command injection. See wiki for details. https://openwrt.org/toh/engenius/engenius_ecb1750_1 Signed-off-by: sven friedmann <sf.openwrt@okay.ms> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [use interrupt-driven "gpio-keys" binding]
This commit is contained in:
sven friedmann
Christian Lamparter
parent
819e7946b0
commit
30dcbc741d
|
|
@ -17,6 +17,7 @@ buffalo,wzr-hp-ag300h)
|
|||
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
buffalo,bhr-4grv2|\
|
||||
engenius,ecb1750|\
|
||||
glinet,gl-ar300m-nand|\
|
||||
glinet,gl-ar300m-nor|\
|
||||
librerouter,librerouter-v1|\
|
||||
|
|
|
|||
|
|
@ -58,6 +58,9 @@ comfast,cf-e5)
|
|||
dlink,dir-859-a1)
|
||||
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
|
||||
;;
|
||||
engenius,ews511ap)
|
||||
ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth0"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth1"
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@ ath79_setup_interfaces()
|
|||
devolo,dvl1200i|\
|
||||
devolo,dvl1750c|\
|
||||
devolo,dvl1750i|\
|
||||
engenius,ecb1750|\
|
||||
glinet,ar300m-lite|\
|
||||
netgear,ex6400|\
|
||||
netgear,ex7300|\
|
||||
|
|
@ -291,6 +292,9 @@ ath79_setup_macs()
|
|||
elecom,wrc-300ghbk2-i)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
;;
|
||||
engenius,epg5000|\
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr|\
|
||||
|
|
|
|||
|
|
@ -109,6 +109,10 @@ case "$FIRMWARE" in
|
|||
ath9k_eeprom_extract "art" 4096 1088
|
||||
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
ath9k_eeprom_extract "art" 4096 1088
|
||||
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2
|
||||
;;
|
||||
engenius,epg5000|\
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr|\
|
||||
|
|
|
|||
|
|
@ -102,6 +102,10 @@ case "$FIRMWARE" in
|
|||
elecom,wrc-1750ghbk2-i)
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
|
||||
;;
|
||||
engenius,epg5000|\
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr2)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,144 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9557.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "engenius,ecb1750", "qca,qca9557";
|
||||
model = "EnGenius ECB1750";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power_orange;
|
||||
led-failsafe = &power_orange;
|
||||
led-running = &power_orange;
|
||||
led-upgrade = &power_orange;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_orange: power_orange {
|
||||
label = "ecb1750:orange:power";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "ecb1750:blue:wlan2g";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "ecb1750:blue:wlan5g";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "ecb1750:blue:lan";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x050000 0xf50000>;
|
||||
};
|
||||
|
||||
partition@fa0000 {
|
||||
label = "userconfig";
|
||||
reg = <0xfa0000 0x050000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
qca,no-eeprom;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy5: ethernet-phy@5 {
|
||||
reg = <5>;
|
||||
at803x-disable-smarteee;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x9a000000 0x80000101 0x80001313>;
|
||||
|
||||
phy-handle = <&phy5>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
rgmii-gmac0 = <1>;
|
||||
rxd-delay = <3>;
|
||||
rxdv-delay = <3>;
|
||||
};
|
||||
};
|
||||
|
|
@ -302,6 +302,18 @@ define Device/embeddedwireless_dorin
|
|||
endef
|
||||
TARGET_DEVICES += embeddedwireless_dorin
|
||||
|
||||
define Device/engenius_ecb1750
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := EnGenius ECB1750
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
||||
IMAGE_SIZE := 15680k
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
|
||||
senao-header -r 0x101 -p 0x6d -t 2
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||
endef
|
||||
TARGET_DEVICES += engenius_ecb1750
|
||||
|
||||
define Device/engenius_epg5000
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := EnGenius EPG5000
|
||||
|
|
|
|||
Loading…
Reference in New Issue