ar71xx: fix swapped LAN/WAN MAC address for Archer C60 v1/v2

The MAC addresses for lan/wan are swapped compared to the vendor
firmware. This adjusts to vendor configuration, which is:

lan   *:7b   label
wan   *:7c   label+1
2.4g  *:7b   label
5g    *:7a   label-1

Only one address is stored in <&mac 0x8>, corresponding to the label.

This has been checked on revisions v1, v2 and v3.

Since ar71xx calculates the ath10k MAC address based on the ethernet
addresses, the number there is adjusted, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 14eb54938b)
This commit is contained in:
Adrian Schmutzler 2020-03-11 15:46:00 +01:00
parent 3ef8465cb8
commit 302170d383
2 changed files with 5 additions and 5 deletions

View File

@ -178,7 +178,7 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
cf-e385ac)
ath10kcal_extract "art" 20480 12064

View File

@ -157,8 +157,8 @@ static void __init archer_c60_v1_setup(void)
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
@ -199,8 +199,8 @@ static void __init archer_c60_v2_setup(void)
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;