diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 972ad293ac..64c9d045d8 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -73,6 +73,9 @@ zbtlink,zbt-z8102ax|\ zbtlink,zbt-z8103ax) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; +dlink,aquila-pro-ai-m30-a1) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000" + ;; h3c,magic-nx30-pro|\ jcg,q30-pro|\ netcore,n60|\ diff --git a/target/linux/mediatek/dts/mt7981b-dlink-aquila-pro-ai-m30-a1.dts b/target/linux/mediatek/dts/mt7981b-dlink-aquila-pro-ai-m30-a1.dts new file mode 100644 index 0000000000..dc14fce2b6 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-dlink-aquila-pro-ai-m30-a1.dts @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + model = "D-Link AQUILA PRO AI M30 A1"; + compatible = "dlink,aquila-pro-ai-m30-a1", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_status_white; + led-failsafe = &led_status_red; + led-running = &led_status_white; + led-upgrade = &led_status_blue; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "wps"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-leds-on-off { + label = "leds-on-off"; + linux,code = ; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_odm 1>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + label = "internet"; + + nvmem-cells = <&macaddr_odm 0>; + nvmem-cell-names = "mac-address"; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x3200000>; + }; + + partition@3780000 { + label = "ubi1"; + reg = <0x3780000 0x3200000>; + read-only; + }; + + partition@6980000 { + label = "Odm"; + reg = <0x6980000 0x40000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_odm: macaddr@81 { + compatible = "mac-base"; + reg = <0x81 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + + }; + + partition@69c0000 { + label = "Config1"; + reg = <0x69c0000 0x80000>; + read-only; + }; + + partition@6a40000 { + label = "Config2"; + reg = <0x6a40000 0x80000>; + read-only; + }; + + partition@6ac0000 { + label = "Storage"; + reg = <0x6ac0000 0xA00000>; + read-only; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + i2c_pins_g0: i2c-pins-g0 { + mux { + function = "i2c"; + groups = "i2c0_1"; + }; + }; +}; + +&wifi { + status = "okay"; + + nvmem-cells = <&eeprom_factory_0>, <&macaddr_odm 2>; + nvmem-cell-names = "eeprom", "mac-address"; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_g0>; + + gca230718@40 { + compatible = "unknown,gca230718"; + reg = <0x40>; + + led_status_red: led@0 { + color = ; + function = LED_FUNCTION_STATUS; + reg = <0>; + }; + + led@1 { + color = ; + function = LED_FUNCTION_STATUS; + reg = <1>; + }; + + led_status_blue: led@2 { + color = ; + function = LED_FUNCTION_STATUS; + reg = <2>; + }; + + led_status_white: led@3 { + color = ; + function = LED_FUNCTION_STATUS; + reg = <3>; + }; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index a1207fc8eb..82395709d9 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -51,6 +51,9 @@ mediatek_setup_interfaces() comfast,cf-e393ax) ucidef_set_interfaces_lan_wan "lan1" eth1 ;; + dlink,aquila-pro-ai-m30-a1) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" internet + ;; glinet,gl-mt2500|\ glinet,gl-mt3000|\ glinet,gl-x3000|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index ef10417e44..f44cd3bb7a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -74,6 +74,10 @@ case "$board" in [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress ;; + dlink,aquila-pro-ai-m30-a1) + addr=$(mtd_get_mac_binary "Odm" 0x81) + [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress + ;; glinet,gl-mt6000|\ glinet,gl-x3000|\ glinet,gl-xe3000) diff --git a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount index c52d004c63..e186589f28 100755 --- a/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount +++ b/target/linux/mediatek/filogic/base-files/etc/init.d/bootcount @@ -5,6 +5,13 @@ START=99 boot() { case $(board_name) in + dlink,aquila-pro-ai-m30-a1) + if grep -q bootpart=ubi0 /proc/cmdline; then + fw_setenv bootpart 0 + else + fw_setenv bootpart 1 + fi + ;; zyxel,ex5700-telenor) fw_setenv uboot_bootcount 0 ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 2717121361..6e3891576d 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -491,6 +491,21 @@ define Device/cudy_wr3000-v1 endef TARGET_DEVICES += cudy_wr3000-v1 +define Device/dlink_aquila-pro-ai-m30-a1 + DEVICE_VENDOR := D-Link + DEVICE_MODEL := AQUILA PRO AI M30 + DEVICE_VARIANT := A1 + DEVICE_DTS := mt7981b-dlink-aquila-pro-ai-m30-a1 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7981-firmware mt7981-wo-firmware + KERNEL_IN_UBI := 1 + IMAGES += recovery.bin + IMAGE_SIZE := 51200k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/recovery.bin := sysupgrade-tar | pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E6110001 \x6A\x28\xEE\x0B \x00\x00\x2C\x00 \x00\x00\x20\x03 \x61\x6E +endef +TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1 + define Device/glinet_gl-mt2500 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-MT2500