mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

ar7: remove 2.6.37 support 

SVN-Revision: 31617
This commit is contained in:
Gabor Juhos 2012-05-05 17:32:43 +00:00
parent 047a51c4fd
commit 28e897845f
11 changed files with 0 additions and 727 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

162
target/linux/ar7/config-2.6.37
View File

@ -1,162 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_ADM6996_PHY=y
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_AR7=y
CONFIG_AR7_GPIO=y
CONFIG_AR7_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
CONFIG_BITREVERSE=y
CONFIG_BOOT_ELF32=y
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CPMAC=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
# CONFIG_DEBUG_ZBOOT is not set
CONFIG_DECOMPRESS_LZMA=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_FIXED_PHY=y
# CONFIG_FSNOTIFY is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HW_RANDOM=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_KALLSYMS=y
CONFIG_LEDS_GPIO=y
# CONFIG_LOONGSON_MC146818 is not set
CONFIG_LOONGSON_UART_BASE=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_LOONGSON is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIKROTIK_RB532 is not set
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MVSWITCH_PHY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NO_EXCEPT_FILL=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_POWERTV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_SCSI_DMA is not set
CONFIG_SCSI_MOD=y
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
# CONFIG_TINY_RCU is not set
CONFIG_TRAD_SIGNALS=y
CONFIG_TREE_RCU=y
CONFIG_VLYNQ=y
# CONFIG_VLYNQ_DEBUG is not set
CONFIG_ZONE_DMA_FLAG=0

33
target/linux/ar7/patches-2.6.37/100-titan-gpio-size.patch
View File

@ -1,33 +0,0 @@
commit 3e9957b4866f3767f19bf0e543b322ad7906c564
Author: Florian Fainelli <florian@openwrt.org>
Date: Fri May 13 17:41:21 2011 +0200
MIPS: AR7: Fix GPIO register size for Titan variant.
The 'size' variable contains the correct register size for both AR7
and Titan, but we never used it to ioremap the correct register size.
This problem only shows up on Titan.
[ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork
recognizes the problem correctly then fails to fix it ...]
Reported-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/2380/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index 425dfa5..bb571bc 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
size = 0x1f;
}
- gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
- AR7_REGS_GPIO + 0x10);
-
+ gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
if (!gpch->regs) {
printk(KERN_ERR "%s: failed to ioremap regs\n",
gpch->chip.label);

11
target/linux/ar7/patches-2.6.37/110-flash.patch
View File

@ -1,11 +0,0 @@
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -79,7 +79,7 @@ static const char *rom_probe_types[] = {
"map_rom",
NULL };
#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
#endif
static int physmap_flash_probe(struct platform_device *dev)

28
target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch
View File

@ -1,28 +0,0 @@
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -990,6 +990,15 @@ config MWAVE
To compile this driver as a module, choose M here: the
module will be called mwave.
+config AR7_GPIO
+ tristate "TI AR7 GPIO Support"
+ depends on AR7
+ help
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
+ processors.
+
+ If compiled as a module, it will be called ar7_gpio.
+
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o

20
target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch
View File

@ -1,20 +0,0 @@
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -515,9 +515,14 @@ static int __vlynq_enable_device(struct
!__vlynq_try_external(dev))
return 0;
} else {
- if (!__vlynq_try_external(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_remote(dev))
+ /* XXX: I don't really know what difference it makes, if the order
+ * of the following calls is changed, but at least in this order
+ * my fritzbox doesn't hang at startup as in
+ * https://dev.openwrt.org/ticket/7324
+ */
+ if (!__vlynq_try_remote(dev) ||
+ !__vlynq_try_local(dev) ||
+ !__vlynq_try_external(dev))
return 0;
}
break;

28
target/linux/ar7/patches-2.6.37/500-serial_kludge.patch
View File

@ -1,28 +0,0 @@
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -302,6 +302,13 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_AR7] = {
+ .name = "TI-AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
@@ -2773,7 +2780,11 @@ static void serial8250_console_putchar(s
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
+#ifdef CONFIG_AR7
+ wait_for_xmitr(up, BOTH_EMPTY);
+#else
wait_for_xmitr(up, UART_LSR_THRE);
+#endif
serial_out(up, UART_TX, ch);
}

55
target/linux/ar7/patches-2.6.37/920-ar7part.patch
View File

@ -1,55 +0,0 @@
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -27,12 +27,14 @@
#include <linux/mtd/partitions.h>
#include <linux/bootmem.h>
#include <linux/magic.h>
+#include <asm/mach-ar7/prom.h>
#define AR7_PARTS 4
#define ROOT_OFFSET 0xe0000
#define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
#define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
#ifndef SQUASHFS_MAGIC
#define SQUASHFS_MAGIC 0x73717368
@@ -44,6 +46,10 @@ struct ar7_bin_rec {
unsigned int address;
};
+int create_titan_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long origin);
+
static int create_mtd_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
unsigned long origin)
@@ -57,6 +63,16 @@ static int create_mtd_partitions(struct
int retries = 10;
struct mtd_partition *ar7_parts;
+ const char *prod_id ;
+ prod_id = prom_getenv("ProductID");
+ if(prod_id &&
+ (strcmp(prod_id, "CYWL")==0 ||
+ strcmp(prod_id, "CYWM")==0 ||
+ strcmp(prod_id, "CYLM")==0 ||
+ strcmp(prod_id, "CYLL")==0)){
+ return create_titan_partitions(master, pparts, origin);
+ }
+
ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
if (!ar7_parts)
return -ENOMEM;
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+obj-$(CONFIG_MTD_AR7_PARTS) += titanpart.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o

49
target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch
View File

@ -1,49 +0,0 @@
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1155,6 +1155,8 @@ static int __devinit cpmac_probe(struct
goto fail;
}
+ ar7_device_reset(pdata->reset_bit);
+
dev->irq = platform_get_irq_byname(pdev, "irq");
dev->netdev_ops = &cpmac_netdev_ops;
@@ -1231,7 +1233,7 @@ int __devinit cpmac_init(void)
cpmac_mii->reset = cpmac_mdio_reset;
cpmac_mii->irq = mii_irqs;
- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
if (!cpmac_mii->priv) {
printk(KERN_ERR "Can't ioremap mdio registers\n");
@@ -1242,10 +1244,16 @@ int __devinit cpmac_init(void)
#warning FIXME: unhardcode gpio&reset bits
ar7_gpio_disable(26);
ar7_gpio_disable(27);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+
+ if (!ar7_is_titan()) {
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+ }
ar7_device_reset(AR7_RESET_BIT_EPHY);
+ if (ar7_is_titan())
+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
+
cpmac_mii->reset(cpmac_mii);
for (i = 0; i < 300; i++)
@@ -1260,7 +1268,8 @@ int __devinit cpmac_init(void)
mask = 0;
}
- cpmac_mii->phy_mask = ~(mask | 0x80000000);
+ cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
+ ~(mask | 0x80000000);
snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
res = mdiobus_register(cpmac_mii);

218
target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch
View File

@ -1,218 +0,0 @@
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -33,7 +33,6 @@
#include <linux/string.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
-#include <linux/phy_fixed.h>
#include <linux/gpio.h>
#include <linux/clk.h>
@@ -248,12 +247,6 @@ static struct resource cpmac_high_res[]
},
};
-static struct fixed_phy_status fixed_phy_status __initdata = {
- .link = 1,
- .speed = 100,
- .duplex = 1,
-};
-
static struct plat_cpmac_data cpmac_low_data = {
.reset_bit = 17,
.power_bit = 20,
@@ -643,26 +636,18 @@ static int __init ar7_register_devices(v
}
if (ar7_has_high_cpmac()) {
- res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
- if (!res) {
- cpmac_get_mac(1, cpmac_high_data.dev_addr);
-
- res = platform_device_register(&cpmac_high);
- if (res)
- pr_warning("unable to register cpmac-high: %d\n", res);
- } else
- pr_warning("unable to add cpmac-high phy: %d\n", res);
- } else
- cpmac_low_data.phy_mask = 0xffffffff;
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
- if (!res) {
- cpmac_get_mac(0, cpmac_low_data.dev_addr);
- res = platform_device_register(&cpmac_low);
+ res = platform_device_register(&cpmac_high);
if (res)
- pr_warning("unable to register cpmac-low: %d\n", res);
+ pr_warning("unable to register cpmac-high: %d\n", res);
} else
- pr_warning("unable to add cpmac-low phy: %d\n", res);
+ cpmac_low_data.phy_mask = 0xffffffff;
+
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+ if (res)
+ pr_warning("unable to register cpmac-low: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
@@ -675,8 +660,10 @@ static int __init ar7_register_devices(v
/* Register watchdog only if enabled in hardware */
bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
- val = readl(bootcr);
- iounmap(bootcr);
+ if (bootcr) {
+ val = readl(bootcr);
+ iounmap(bootcr);
+ }
if (val & AR7_WDT_HW_ENA) {
if (ar7_has_high_vlynq())
ar7_wdt_res.start = UR8_REGS_WDT;
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -42,6 +42,7 @@
#define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C)
#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08)
#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -34,7 +34,6 @@
#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/phy.h>
-#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
@@ -47,14 +46,11 @@ MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:cpmac");
static int debug_level = 8;
-static int dumb_switch;
-/* Next 2 are only used in cpmac_probe, so it's pointless to change them */
+/* Next is only used in cpmac_probe, so it's pointless to change them */
module_param(debug_level, int, 0444);
-module_param(dumb_switch, int, 0444);
MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
-MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
#define CPMAC_VERSION "0.5.2"
/* frame size + 802.1q tag + FCS size */
@@ -673,9 +669,8 @@ static void cpmac_hw_start(struct net_de
for (i = 0; i < 8; i++)
cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]);
cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]);
- cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] |
- (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) |
- (dev->dev_addr[3] << 24));
+ cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *)
+ dev->dev_addr));
cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE);
cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff);
cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff);
@@ -1107,8 +1102,6 @@ static const struct net_device_ops cpmac
.ndo_set_mac_address = eth_mac_addr,
};
-static int external_switch;
-
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id;
@@ -1120,25 +1113,18 @@ static int __devinit cpmac_probe(struct
pdata = pdev->dev.platform_data;
- if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
- phy_id = pdev->id;
- } else {
- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
- if (!(pdata->phy_mask & (1 << phy_id)))
- continue;
- if (!cpmac_mii->phy_map[phy_id])
- continue;
- strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
- break;
- }
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ if (!(pdata->phy_mask & (1 << phy_id)))
+ continue;
+ if (!cpmac_mii->phy_map[phy_id])
+ continue;
+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
+ break;
}
if (phy_id == PHY_MAX_ADDR) {
- dev_err(&pdev->dev, "no PHY present, falling back "
- "to switch on MDIO bus 0\n");
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
- phy_id = pdev->id;
+ printk(KERN_ERR "cpmac: No PHY present\n");
+ return -ENXIO;
}
dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1227,6 +1213,7 @@ int __devinit cpmac_init(void)
{
u32 mask;
int i, res;
+ void __iomem *mii_reg;
cpmac_mii = mdiobus_alloc();
if (cpmac_mii == NULL)
@@ -1250,14 +1237,14 @@ int __devinit cpmac_init(void)
ar7_gpio_disable(26);
ar7_gpio_disable(27);
- if (!ar7_is_titan()) {
+ if (ar7_is_titan()) {
+ ar7_device_reset(AR7_RESET_BIT_EPHY);
+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
+ } else {
+ ar7_device_reset(AR7_RESET_BIT_EPHY);
ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
}
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-
- if (ar7_is_titan())
- ar7_device_reset(TITAN_RESET_BIT_EPHY1);
cpmac_mii->reset(cpmac_mii);
@@ -1269,10 +1256,22 @@ int __devinit cpmac_init(void)
msleep(10);
}
- mask &= 0x7fffffff;
+ mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000);
if (mask & (mask - 1)) {
- external_switch = 1;
- mask = 0;
+ if (!ar7_has_high_cpmac()) {
+ if (ar7_is_titan()) {
+ ar7_device_disable(AR7_RESET_BIT_EPHY);
+ ar7_device_disable(TITAN_RESET_BIT_EPHY1);
+ } else
+ ar7_device_disable(AR7_RESET_BIT_EPHY);
+
+ //Titan remap might be different
+ mii_reg = ioremap(AR7_REGS_MII, 4);
+ if (mii_reg) {
+ writel(readl(mii_reg) | 1, mii_reg);
+ iounmap(mii_reg);
+ }
+ }
}
cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :

70
target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch
View File

@ -1,70 +0,0 @@
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -372,6 +372,7 @@ static struct sk_buff *cpmac_rx_one(stru
struct cpmac_desc *desc)
{
struct sk_buff *skb, *result = NULL;
+ int offset;
if (unlikely(netif_msg_hw(priv)))
cpmac_dump_desc(priv->dev, desc);
@@ -383,10 +384,15 @@ static struct sk_buff *cpmac_rx_one(stru
return NULL;
}
- skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
+ skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
if (likely(skb)) {
+ offset = 2;
+ if (priv->phy) {
+ offset += priv->phy->pkt_align;
+ }
+ skb_reserve(skb, offset);
+
skb_put(desc->skb, desc->datalen);
- desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
skb_checksum_none_assert(desc->skb);
priv->dev->stats.rx_packets++;
priv->dev->stats.rx_bytes += desc->datalen;
@@ -458,7 +464,12 @@ static int cpmac_poll(struct napi_struct
skb = cpmac_rx_one(priv, desc);
if (likely(skb)) {
- netif_receive_skb(skb);
+ if (priv->phy->netif_receive_skb) {
+ priv->phy->netif_receive_skb(skb);
+ } else {
+ skb->protocol = eth_type_trans(skb, priv->dev);
+ netif_receive_skb(skb);
+ }
received++;
}
desc = desc->next;
@@ -951,7 +962,7 @@ static void cpmac_adjust_link(struct net
static int cpmac_open(struct net_device *dev)
{
- int i, size, res;
+ int i, size, res, offset;
struct cpmac_priv *priv = netdev_priv(dev);
struct resource *mem;
struct cpmac_desc *desc;
@@ -990,11 +1001,17 @@ static int cpmac_open(struct net_device
priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
- skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
+ skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
if (unlikely(!skb)) {
res = -ENOMEM;
goto fail_desc;
}
+ offset = 2;
+ if (priv->phy) {
+ offset += priv->phy->pkt_align;
+ }
+ skb_reserve(skb, offset);
+
desc->skb = skb;
desc->data_mapping = dma_map_single(&dev->dev, skb->data,
CPMAC_SKB_SIZE,

53
target/linux/ar7/patches-2.6.37/999-gt701_leds.patch
View File

@ -1,53 +0,0 @@
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -455,6 +455,40 @@ static struct gpio_led fb_fon_leds[] = {
},
};
+static struct gpio_led gt701_leds[] = {
+ {
+ .name = "inetgreen",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "inetred",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "powerred",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "powergreen",
+ .gpio = 8,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "ethernet",
+ .gpio = 10,
+ .active_low = 1,
+ },
+};
+
static struct gpio_led_platform_data ar7_led_data;
static struct platform_device ar7_gpio_leds = {
@@ -496,6 +530,9 @@ static void __init detect_leds(void)
} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
ar7_led_data.leds = titan_leds;
+ } else if (strstr(prid, "GT701")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
+ ar7_led_data.leds = gt701_leds;
}
}