diff --git a/package/network/services/openvpn/Config-mbedtls.in b/package/network/services/openvpn/Config-mbedtls.in deleted file mode 100644 index beac492022..0000000000 --- a/package/network/services/openvpn/Config-mbedtls.in +++ /dev/null @@ -1,58 +0,0 @@ -if PACKAGE_openvpn-mbedtls - -config OPENVPN_mbedtls_ENABLE_LZO - bool "Enable LZO compression support" - default y - -config OPENVPN_mbedtls_ENABLE_LZ4 - bool "Enable LZ4 compression support" - default y - -config OPENVPN_mbedtls_ENABLE_SERVER - bool "Enable server support (otherwise only client mode is support)" - default y - -#config OPENVPN_mbedtls_ENABLE_EUREPHIA -# bool "Enable support for the eurephia plug-in" -# default n - -config OPENVPN_mbedtls_ENABLE_MANAGEMENT - bool "Enable management server support" - default n - -#config OPENVPN_mbedtls_ENABLE_PKCS11 -# bool "Enable pkcs11 support" -# default n - -config OPENVPN_mbedtls_ENABLE_FRAGMENT - bool "Enable internal fragmentation support (--fragment)" - default y - -config OPENVPN_mbedtls_ENABLE_MULTIHOME - bool "Enable multi-homed UDP server support (--multihome)" - default y - -config OPENVPN_mbedtls_ENABLE_PORT_SHARE - bool "Enable TCP server port-share support (--port-share)" - default y - -config OPENVPN_mbedtls_ENABLE_DEF_AUTH - bool "Enable deferred authentication" - default y - -config OPENVPN_mbedtls_ENABLE_PF - bool "Enable internal packet filter" - default y - -config OPENVPN_mbedtls_ENABLE_IPROUTE2 - bool "Enable support for iproute2" - default n - -config OPENVPN_mbedtls_ENABLE_SMALL - bool "Enable size optimization" - default y - help - enable smaller executable size (disable OCC, usage - message, and verb 4 parm list) - -endif diff --git a/package/network/services/openvpn/Config-nossl.in b/package/network/services/openvpn/Config-nossl.in deleted file mode 100644 index 79140ad5d1..0000000000 --- a/package/network/services/openvpn/Config-nossl.in +++ /dev/null @@ -1,50 +0,0 @@ -if PACKAGE_openvpn-nossl - -config OPENVPN_nossl_ENABLE_LZO - bool "Enable LZO compression support" - default y - -config OPENVPN_nossl_ENABLE_LZ4 - bool "Enable LZ4 compression support" - default y - -config OPENVPN_nossl_ENABLE_SERVER - bool "Enable server support (otherwise only client mode is support)" - default y - -config OPENVPN_nossl_ENABLE_MANAGEMENT - bool "Enable management server support" - default n - -config OPENVPN_nossl_ENABLE_FRAGMENT - bool "Enable internal fragmentation support (--fragment)" - default y - -config OPENVPN_nossl_ENABLE_MULTIHOME - bool "Enable multi-homed UDP server support (--multihome)" - default y - -config OPENVPN_nossl_ENABLE_PORT_SHARE - bool "Enable TCP server port-share support (--port-share)" - default y - -config OPENVPN_nossl_ENABLE_DEF_AUTH - bool "Enable deferred authentication" - default y - -config OPENVPN_nossl_ENABLE_PF - bool "Enable internal packet filter" - default y - -config OPENVPN_nossl_ENABLE_IPROUTE2 - bool "Enable support for iproute2" - default n - -config OPENVPN_nossl_ENABLE_SMALL - bool "Enable size optimization" - default y - help - enable smaller executable size (disable OCC, usage - message, and verb 4 parm list) - -endif diff --git a/package/network/services/openvpn/Config-openssl.in b/package/network/services/openvpn/Config-openssl.in deleted file mode 100644 index f2b618eff1..0000000000 --- a/package/network/services/openvpn/Config-openssl.in +++ /dev/null @@ -1,62 +0,0 @@ -if PACKAGE_openvpn-openssl - -config OPENVPN_openssl_ENABLE_LZO - bool "Enable LZO compression support" - default y - -config OPENVPN_openssl_ENABLE_LZ4 - bool "Enable LZ4 compression support" - default y - -config OPENVPN_openssl_ENABLE_X509_ALT_USERNAME - bool "Enable the --x509-username-field feature" - default n - -config OPENVPN_openssl_ENABLE_SERVER - bool "Enable server support (otherwise only client mode is support)" - default y - -#config OPENVPN_openssl_ENABLE_EUREPHIA -# bool "Enable support for the eurephia plug-in" -# default n - -config OPENVPN_openssl_ENABLE_MANAGEMENT - bool "Enable management server support" - default n - -#config OPENVPN_openssl_ENABLE_PKCS11 -# bool "Enable pkcs11 support" -# default n - -config OPENVPN_openssl_ENABLE_FRAGMENT - bool "Enable internal fragmentation support (--fragment)" - default y - -config OPENVPN_openssl_ENABLE_MULTIHOME - bool "Enable multi-homed UDP server support (--multihome)" - default y - -config OPENVPN_openssl_ENABLE_PORT_SHARE - bool "Enable TCP server port-share support (--port-share)" - default y - -config OPENVPN_openssl_ENABLE_DEF_AUTH - bool "Enable deferred authentication" - default y - -config OPENVPN_openssl_ENABLE_PF - bool "Enable internal packet filter" - default y - -config OPENVPN_openssl_ENABLE_IPROUTE2 - bool "Enable support for iproute2" - default n - -config OPENVPN_openssl_ENABLE_SMALL - bool "Enable size optimization" - default y - help - enable smaller executable size (disable OCC, usage - message, and verb 4 parm list) - -endif diff --git a/package/network/services/openvpn/Makefile b/package/network/services/openvpn/Makefile deleted file mode 100644 index 40570fbdb6..0000000000 --- a/package/network/services/openvpn/Makefile +++ /dev/null @@ -1,158 +0,0 @@ -# -# Copyright (C) 2010-2015 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -PKG_NAME:=openvpn - -PKG_VERSION:=2.4.9 -PKG_RELEASE:=5 - -PKG_SOURCE_URL:=\ - https://build.openvpn.net/downloads/releases/ \ - https://swupdate.openvpn.net/community/releases/ -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz -PKG_HASH:=641f3add8694b2ccc39fd4fd92554e4f089ad16a8db6d2b473ec284839a5ebe2 - -PKG_MAINTAINER:=Felix Fietkau - -PKG_INSTALL:=1 -PKG_FIXUP:=autoreconf -PKG_BUILD_PARALLEL:=1 -PKG_LICENSE:=GPL-2.0 -PKG_CPE_ID:=cpe:/a:openvpn:openvpn - -include $(INCLUDE_DIR)/package.mk - -define Package/openvpn/Default - TITLE:=Open source VPN solution using $(2) - SECTION:=net - CATEGORY:=Network - URL:=http://openvpn.net - SUBMENU:=VPN - MENU:=1 - DEPENDS:=+kmod-tun +OPENVPN_$(1)_ENABLE_LZO:liblzo +OPENVPN_$(1)_ENABLE_IPROUTE2:ip $(3) - VARIANT:=$(1) -ifeq ($(1),nossl) - PROVIDES:=openvpn -else - PROVIDES:=openvpn openvpn-crypto -endif -endef - -Package/openvpn-openssl=$(call Package/openvpn/Default,openssl,OpenSSL,+PACKAGE_openvpn-openssl:libopenssl) -Package/openvpn-mbedtls=$(call Package/openvpn/Default,mbedtls,mbedTLS,+PACKAGE_openvpn-mbedtls:libmbedtls) -Package/openvpn-nossl=$(call Package/openvpn/Default,nossl,plaintext (no SSL)) - -define Package/openvpn/config/Default - source "$(SOURCE)/Config-$(1).in" -endef - -Package/openvpn-openssl/config=$(call Package/openvpn/config/Default,openssl) -Package/openvpn-mbedtls/config=$(call Package/openvpn/config/Default,mbedtls) -Package/openvpn-nossl/config=$(call Package/openvpn/config/Default,nossl) - -ifeq ($(BUILD_VARIANT),mbedtls) -CONFIG_OPENVPN_MBEDTLS:=y -endif -ifeq ($(BUILD_VARIANT),openssl) -CONFIG_OPENVPN_OPENSSL:=y -endif -ifeq ($(BUILD_VARIANT),nossl) -CONFIG_OPENVPN_NOSSL:=y -endif - -CONFIGURE_VARS += \ - IFCONFIG=/sbin/ifconfig \ - ROUTE=/sbin/route \ - IPROUTE=/sbin/ip \ - NETSTAT=/sbin/netstat - -TARGET_CFLAGS += -ffunction-sections -fdata-sections -TARGET_LDFLAGS += -Wl,--gc-sections - -define Build/Configure - $(call Build/Configure/Default, \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_SMALL),--enable-small) \ - --disable-selinux \ - --disable-systemd \ - --disable-plugins \ - --disable-debug \ - --disable-pkcs11 \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_LZO),--enable,--disable)-lzo \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_LZ4),--enable,--disable)-lz4 \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_X509_ALT_USERNAME),--enable,--disable)-x509-alt-username \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_SERVER),--enable,--disable)-server \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MANAGEMENT),--enable,--disable)-management \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_FRAGMENT),--enable,--disable)-fragment \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_MULTIHOME),--enable,--disable)-multihome \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_IPROUTE2),--enable,--disable)-iproute2 \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_DEF_AUTH),--enable,--disable)-def-auth \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_PF),--enable,--disable)-pf \ - $(if $(CONFIG_OPENVPN_$(BUILD_VARIANT)_ENABLE_PORT_SHARE),--enable,--disable)-port-share \ - $(if $(CONFIG_OPENVPN_NOSSL),--disable-crypto,--enable-crypto) \ - $(if $(CONFIG_OPENVPN_OPENSSL),--with-crypto-library=openssl) \ - $(if $(CONFIG_OPENVPN_MBEDTLS),--with-crypto-library=mbedtls) \ - ) -endef - -define Package/openvpn-$(BUILD_VARIANT)/conffiles -/etc/config/openvpn -/etc/openvpn.user -endef - -define Package/openvpn-$(BUILD_VARIANT)/install - $(INSTALL_DIR) \ - $(1)/usr/sbin \ - $(1)/usr/share/openvpn \ - $(1)/etc/init.d \ - $(1)/etc/config \ - $(1)/etc/openvpn \ - $(1)/lib/functions \ - $(1)/lib/upgrade/keep.d \ - $(1)/usr/libexec \ - $(1)/etc/hotplug.d/openvpn - - $(INSTALL_BIN) \ - $(PKG_INSTALL_DIR)/usr/sbin/openvpn \ - $(1)/usr/sbin/ - - $(INSTALL_BIN) \ - files/openvpn.init \ - $(1)/etc/init.d/openvpn - - $(INSTALL_BIN) \ - files/usr/libexec/openvpn-hotplug \ - $(1)/usr/libexec/openvpn-hotplug - - $(INSTALL_DATA) \ - files/lib/functions/openvpn.sh \ - $(1)/lib/functions/openvpn.sh - - $(INSTALL_DATA) \ - files/etc/hotplug.d/openvpn/01-user \ - $(1)/etc/hotplug.d/openvpn/01-user - - $(INSTALL_DATA) \ - files/etc/openvpn.user \ - $(1)/etc/openvpn.user - - $(INSTALL_DATA) \ - files/openvpn.options \ - $(1)/usr/share/openvpn/openvpn.options - - $(INSTALL_CONF) files/openvpn.config \ - $(1)/etc/config/openvpn - - $(INSTALL_DATA) \ - files/openvpn.upgrade \ - $(1)/lib/upgrade/keep.d/openvpn -endef - -$(eval $(call BuildPackage,openvpn-openssl)) -$(eval $(call BuildPackage,openvpn-mbedtls)) -$(eval $(call BuildPackage,openvpn-nossl)) diff --git a/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user b/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user deleted file mode 100644 index f93823e5c5..0000000000 --- a/package/network/services/openvpn/files/etc/hotplug.d/openvpn/01-user +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh - -. /lib/functions/openvpn.sh - -[ -e "/etc/openvpn.user" ] && { - env -i ACTION="$ACTION" INSTANCE="$INSTANCE" \ - /bin/sh \ - /etc/openvpn.user \ - $* -} - -# Wrap user defined scripts on up/down events -case "$ACTION" in - up|down) - if get_openvpn_option "$config" command "$ACTION"; then - shift - exec /bin/sh -c "$command $*" - fi - ;; -esac - -exit 0 diff --git a/package/network/services/openvpn/files/etc/openvpn.user b/package/network/services/openvpn/files/etc/openvpn.user deleted file mode 100644 index a77566556a..0000000000 --- a/package/network/services/openvpn/files/etc/openvpn.user +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh -# -# This file is interpreted as shell script. -# Put your custom openvpn action here, they will -# be executed with each opevnp event. -# -# $ACTION -# down action is generated after the TUN/TAP device is closed -# up action is generated after the TUN/TAP device is opened -# $INSTANCE Name of the openvpn instance which went up or down - diff --git a/package/network/services/openvpn/files/lib/functions/openvpn.sh b/package/network/services/openvpn/files/lib/functions/openvpn.sh deleted file mode 100644 index 83fb1bb453..0000000000 --- a/package/network/services/openvpn/files/lib/functions/openvpn.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -get_openvpn_option() { - local config="$1" - local variable="$2" - local option="$3" - - local value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+(([^ \t\\]|\\.)+)[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')" - [ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+'"'([^']+)'"'[ \t]*$/\1/p' "$config" | tail -n1)" - [ -n "$value" ] || value="$(sed -rne 's/^[ \t]*'"$option"'[ \t]+"(([^"\\]|\\.)+)"[ \t]*$/\1/p' "$config" | tail -n1 | sed -re 's/\\(.)/\1/g')" - [ -n "$value" ] || return 1 - - export -n "$variable=$value" - return 0 -} - diff --git a/package/network/services/openvpn/files/openvpn.config b/package/network/services/openvpn/files/openvpn.config deleted file mode 100644 index 3de1881e35..0000000000 --- a/package/network/services/openvpn/files/openvpn.config +++ /dev/null @@ -1,474 +0,0 @@ -package openvpn - -################################################# -# Sample to include a custom config file. # -################################################# - -config openvpn custom_config - - # Set to 1 to enable this instance: - option enabled 0 - - # Include OpenVPN configuration - option config /etc/openvpn/my-vpn.conf - - -################################################# -# Sample OpenVPN 2.0 uci config for # -# multi-client server. # -################################################# - -config openvpn sample_server - - # Set to 1 to enable this instance: - option enabled 0 - - # Which local IP address should OpenVPN - # listen on? (optional) -# option local 0.0.0.0 - - # Which TCP/UDP port should OpenVPN listen on? - # If you want to run multiple OpenVPN instances - # on the same machine, use a different port - # number for each one. You will need to - # open up this port on your firewall. - option port 1194 - - # TCP or UDP server? -# option proto tcp - option proto udp - - # "dev tun" will create a routed IP tunnel, - # "dev tap" will create an ethernet tunnel. - # Use "dev tap0" if you are ethernet bridging - # and have precreated a tap0 virtual interface - # and bridged it with your ethernet interface. - # If you want to control access policies - # over the VPN, you must create firewall - # rules for the the TUN/TAP interface. - # On non-Windows systems, you can give - # an explicit unit number, such as tun0. - # On Windows, use "dev-node" for this. - # On most systems, the VPN will not function - # unless you partially or fully disable - # the firewall for the TUN/TAP interface. -# option dev tap - option dev tun - - # SSL/TLS root certificate (ca), certificate - # (cert), and private key (key). Each client - # and the server must have their own cert and - # key file. The server and all clients will - # use the same ca file. - # - # See the "easy-rsa" directory for a series - # of scripts for generating RSA certificates - # and private keys. Remember to use - # a unique Common Name for the server - # and each of the client certificates. - # - # Any X509 key management system can be used. - # OpenVPN can also use a PKCS #12 formatted key file - # (see "pkcs12" directive in man page). - option ca /etc/openvpn/ca.crt - option cert /etc/openvpn/server.crt - # This file should be kept secret: - option key /etc/openvpn/server.key - - # Diffie hellman parameters. - # Generate your own with: - # openssl dhparam -out dh2048.pem 2048 - # Substitute 2048 for 1024 if you are using - # 1024 bit keys. - option dh /etc/openvpn/dh2048.pem - - # Configure server mode and supply a VPN subnet - # for OpenVPN to draw client addresses from. - # The server will take 10.8.0.1 for itself, - # the rest will be made available to clients. - # Each client will be able to reach the server - # on 10.8.0.1. Comment this line out if you are - # ethernet bridging. See the man page for more info. - option server "10.8.0.0 255.255.255.0" - - # Maintain a record of client <-> virtual IP address - # associations in this file. If OpenVPN goes down or - # is restarted, reconnecting clients can be assigned - # the same virtual IP address from the pool that was - # previously assigned. - option ifconfig_pool_persist /tmp/ipp.txt - - # Configure server mode for ethernet bridging. - # You must first use your OS's bridging capability - # to bridge the TAP interface with the ethernet - # NIC interface. Then you must manually set the - # IP/netmask on the bridge interface, here we - # assume 10.8.0.4/255.255.255.0. Finally we - # must set aside an IP range in this subnet - # (start=10.8.0.50 end=10.8.0.100) to allocate - # to connecting clients. Leave this line commented - # out unless you are ethernet bridging. -# option server_bridge "10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100" - - # Push routes to the client to allow it - # to reach other private subnets behind - # the server. Remember that these - # private subnets will also need - # to know to route the OpenVPN client - # address pool (10.8.0.0/255.255.255.0) - # back to the OpenVPN server. -# list push "route 192.168.10.0 255.255.255.0" -# list push "route 192.168.20.0 255.255.255.0" - - # To assign specific IP addresses to specific - # clients or if a connecting client has a private - # subnet behind it that should also have VPN access, - # use the subdirectory "ccd" for client-specific - # configuration files (see man page for more info). - - # EXAMPLE: Suppose the client - # having the certificate common name "Thelonious" - # also has a small subnet behind his connecting - # machine, such as 192.168.40.128/255.255.255.248. - # First, uncomment out these lines: -# option client_config_dir /etc/openvpn/ccd -# list route "192.168.40.128 255.255.255.248" - # Then create a file ccd/Thelonious with this line: - # iroute 192.168.40.128 255.255.255.248 - # This will allow Thelonious' private subnet to - # access the VPN. This example will only work - # if you are routing, not bridging, i.e. you are - # using "dev tun" and "server" directives. - - # EXAMPLE: Suppose you want to give - # Thelonious a fixed VPN IP address of 10.9.0.1. - # First uncomment out these lines: -# option client_config_dir /etc/openvpn/ccd -# list route "10.9.0.0 255.255.255.252" -# list route "192.168.100.0 255.255.255.0" - # Then add this line to ccd/Thelonious: - # ifconfig-push "10.9.0.1 10.9.0.2" - - # Suppose that you want to enable different - # firewall access policies for different groups - # of clients. There are two methods: - # (1) Run multiple OpenVPN daemons, one for each - # group, and firewall the TUN/TAP interface - # for each group/daemon appropriately. - # (2) (Advanced) Create a script to dynamically - # modify the firewall in response to access - # from different clients. See man - # page for more info on learn-address script. -# option learn_address /etc/openvpn/script - - # If enabled, this directive will configure - # all clients to redirect their default - # network gateway through the VPN, causing - # all IP traffic such as web browsing and - # and DNS lookups to go through the VPN - # (The OpenVPN server machine may need to NAT - # the TUN/TAP interface to the internet in - # order for this to work properly). - # CAVEAT: May break client's network config if - # client's local DHCP server packets get routed - # through the tunnel. Solution: make sure - # client's local DHCP server is reachable via - # a more specific route than the default route - # of 0.0.0.0/0.0.0.0. -# list push "redirect-gateway" - - # Certain Windows-specific network settings - # can be pushed to clients, such as DNS - # or WINS server addresses. CAVEAT: - # http://openvpn.net/faq.html#dhcpcaveats -# list push "dhcp-option DNS 10.8.0.1" -# list push "dhcp-option WINS 10.8.0.1" - - # Uncomment this directive to allow different - # clients to be able to "see" each other. - # By default, clients will only see the server. - # To force clients to only see the server, you - # will also need to appropriately firewall the - # server's TUN/TAP interface. -# option client_to_client 1 - - # Uncomment this directive if multiple clients - # might connect with the same certificate/key - # files or common names. This is recommended - # only for testing purposes. For production use, - # each client should have its own certificate/key - # pair. - # - # IF YOU HAVE NOT GENERATED INDIVIDUAL - # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, - # EACH HAVING ITS OWN UNIQUE "COMMON NAME", - # UNCOMMENT THIS LINE OUT. -# option duplicate_cn 1 - - # The keepalive directive causes ping-like - # messages to be sent back and forth over - # the link so that each side knows when - # the other side has gone down. - # Ping every 10 seconds, assume that remote - # peer is down if no ping received during - # a 120 second time period. - option keepalive "10 120" - - # For extra security beyond that provided - # by SSL/TLS, create an "HMAC firewall" - # to help block DoS attacks and UDP port flooding. - # - # Generate with: - # openvpn --genkey --secret ta.key - # - # The server and each client must have - # a copy of this key. - # The second parameter should be '0' - # on the server and '1' on the clients. - # This file is secret: -# option tls_auth "/etc/openvpn/ta.key 0" - - # For additional privacy, a shared secret key - # can be used for both authentication (as in tls_auth) - # and encryption of the TLS control channel. - # - # Generate a shared secret with: - # openvpn --genkey --secret ta.key - # - # The server and each client must have - # a copy of this key. - # - # tls_auth and tls_crypt should NOT - # be combined, as tls_crypt implies tls_auth. - # Use EITHER tls_crypt, tls_auth, or neither option. -# option tls_crypt "/etc/openvpn/ta.key" - - # Set the minimum required TLS protocol version - # for all connections. - # - # Require at least TLS 1.1 -# option tls_version_min "1.1" - # Require at least TLS 1.2 -# option tls_version_min "1.2" - # Require TLS 1.2, or the highest version supported - # on the system -# option tls_version_min "1.2 'or-highest'" - - # OpenVPN versions 2.4 and later will attempt to - # automatically negotiate the most secure cipher - # between the client and server, regardless of a - # configured "option cipher" (see below). - # Automatic negotiation is recommended. - # - # Uncomment this option to disable this behavior, - # and force all OpenVPN peers to use the configured - # cipher option instead (not recommended). -# option ncp_disable - - # Select a cryptographic cipher. - # This config item must be copied to - # the client config file as well. - # - # To see all supported ciphers, run: - # openvpn --show-ciphers - # - # Blowfish (default for backwards compatibility, - # but not recommended due to weaknesses): -# option cipher BF-CBC - # AES: -# option cipher AES-128-CBC - # Triple-DES: -# option cipher DES-EDE3-CBC - - # Enable compression on the VPN link. - # If you enable it here, you must also - # enable it in the client config file. - # - # Compression is not recommended, as compression and - # encryption in combination can weaken the security - # of the connection. - # - # LZ4 requires OpenVPN 2.4+ client and server -# option compress lz4 - # LZO is compatible with most OpenVPN versions - # (set "compress lzo" on 2.4+ clients, and "comp-lzo yes" on older clients) -# option compress lzo - - # The maximum number of concurrently connected - # clients we want to allow. -# option max_clients 100 - - # The persist options will try to avoid - # accessing certain resources on restart - # that may no longer be accessible because - # of the privilege downgrade. - option persist_key 1 - option persist_tun 1 - option user nobody - - # Output a short status file showing - # current connections, truncated - # and rewritten every minute. - option status /tmp/openvpn-status.log - - # By default, log messages will go to the syslog (or - # on Windows, if running as a service, they will go to - # the "\Program Files\OpenVPN\log" directory). - # Use log or log-append to override this default. - # "log" will truncate the log file on OpenVPN startup, - # while "log-append" will append to it. Use one - # or the other (but not both). -# option log /tmp/openvpn.log -# option log_append /tmp/openvpn.log - - # Set the appropriate level of log - # file verbosity. - # - # 0 is silent, except for fatal errors - # 4 is reasonable for general usage - # 5 and 6 can help to debug connection problems - # 9 is extremely verbose - option verb 3 - - # Silence repeating messages. At most 20 - # sequential messages of the same message - # category will be output to the log. -# option mute 20 - - -############################################## -# Sample client-side OpenVPN 2.0 uci config # -# for connecting to multi-client server. # -############################################## - -config openvpn sample_client - - # Set to 1 to enable this instance: - option enabled 0 - - # Specify that we are a client and that we - # will be pulling certain config file directives - # from the server. - option client 1 - - # Use the same setting as you are using on - # the server. - # On most systems, the VPN will not function - # unless you partially or fully disable - # the firewall for the TUN/TAP interface. -# option dev tap - option dev tun - - # Are we connecting to a TCP or - # UDP server? Use the same setting as - # on the server. -# option proto tcp - option proto udp - - # The hostname/IP and port of the server. - # You can have multiple remote entries - # to load balance between the servers. - list remote "my_server_1 1194" -# list remote "my_server_2 1194" - - # Choose a random host from the remote - # list for load_balancing. Otherwise - # try hosts in the order specified. -# option remote_random 1 - - # Keep trying indefinitely to resolve the - # host name of the OpenVPN server. Very useful - # on machines which are not permanently connected - # to the internet such as laptops. - option resolv_retry infinite - - # Most clients don't need to bind to - # a specific local port number. - option nobind 1 - - # Try to preserve some state across restarts. - option persist_key 1 - option persist_tun 1 - option user nobody - - # If you are connecting through an - # HTTP proxy to reach the actual OpenVPN - # server, put the proxy server/IP and - # port number here. See the man page - # if your proxy server requires - # authentication. - # retry on connection failures: -# option http_proxy_retry 1 - # specify http proxy address and port: -# option http_proxy "192.168.1.100 8080" - - # Wireless networks often produce a lot - # of duplicate packets. Set this flag - # to silence duplicate packet warnings. -# option mute_replay_warnings 1 - - # SSL/TLS parms. - # See the server config file for more - # description. It's best to use - # a separate .crt/.key file pair - # for each client. A single ca - # file can be used for all clients. - option ca /etc/openvpn/ca.crt - option cert /etc/openvpn/client.crt - option key /etc/openvpn/client.key - - # Verify server certificate by checking - # that the certicate has the key usage - # field set to "server". This is an - # important precaution to protect against - # a potential attack discussed here: - # http://openvpn.net/howto.html#mitm - # - # To use this feature, you will need to generate - # your server certificates with the nsCertType - # field set to "server". The build_key_server - # script in the easy_rsa folder will do this. -# option remote_cert_tls server - - # If a tls_auth key is used on the server - # then every client must also have the key. -# option tls_auth "/etc/openvpn/ta.key 1" - - # If a tls_crypt key is used on the server - # every client must also have the key. -# option tls_crypt "/etc/openvpn/ta.key" - - # Set the minimum required TLS protocol version - # for all connections. - # - # Require at least TLS 1.1 -# option tls_version_min "1.1" - # Require at least TLS 1.2 -# option tls_version_min "1.2" - # Require TLS 1.2, or the highest version supported - # on the system -# option tls_version_min "1.2 'or-highest'" - - # Select a cryptographic cipher. - # If the cipher option is used on the server - # then you must also specify it here. -# option cipher x - - # Enable compression on the VPN link. - # Don't enable this unless it is also - # enabled in the server config file. - # - # Compression is not recommended, as compression and - # encryption in combination can weaken the security - # of the connection. - # - # LZ4 requires OpenVPN 2.4+ on server and client -# option compress lz4 - # LZO is compatible with most OpenVPN versions -# option compress lzo - - # Set log file verbosity. - option verb 3 - - # Silence repeating messages -# option mute 20 diff --git a/package/network/services/openvpn/files/openvpn.init b/package/network/services/openvpn/files/openvpn.init deleted file mode 100644 index 487a2269e2..0000000000 --- a/package/network/services/openvpn/files/openvpn.init +++ /dev/null @@ -1,209 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2008-2013 OpenWrt.org -# Copyright (C) 2008 Jo-Philipp Wich -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. - -START=90 -STOP=10 - -USE_PROCD=1 -PROG=/usr/sbin/openvpn - -LIST_SEP=" -" - -UCI_STARTED= -UCI_DISABLED= - -append_param() { - local s="$1" - local v="$2" - case "$v" in - *_*_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;; - *_*_*) v=${v%%_*}-${v#*_}; v=${v%%_*}-${v#*_} ;; - *_*) v=${v%%_*}-${v#*_} ;; - esac - echo -n "$v" >> "/var/etc/openvpn-$s.conf" - return 0 -} - -append_bools() { - local p; local v; local s="$1"; shift - for p in $*; do - config_get_bool v "$s" "$p" - [ "$v" = 1 ] && append_param "$s" "$p" && echo >> "/var/etc/openvpn-$s.conf" - done -} - -append_params() { - local p; local v; local s="$1"; shift - for p in $*; do - config_get v "$s" "$p" - IFS="$LIST_SEP" - for v in $v; do - [ -n "$v" ] && [ "$p" != "push" ] && append_param "$s" "$p" && echo " $v" >> "/var/etc/openvpn-$s.conf" - [ -n "$v" ] && [ "$p" = "push" ] && append_param "$s" "$p" && echo " \"$v\"" >> "/var/etc/openvpn-$s.conf" - done - unset IFS - done -} - -append_list() { - local p; local v; local s="$1"; shift - - list_cb_append() { - v="${v}:$1" - } - - for p in $*; do - unset v - config_list_foreach "$s" "$p" list_cb_append - [ -n "$v" ] && append_param "$s" "$p" && echo " ${v:1}" >> "/var/etc/openvpn-$s.conf" - done -} - -section_enabled() { - config_get_bool enable "$1" 'enable' 0 - config_get_bool enabled "$1" 'enabled' 0 - [ $enable -gt 0 ] || [ $enabled -gt 0 ] -} - -openvpn_get_dev() { - local dev dev_type - local name="$1" - local conf="$2" - - # Do override only for configurations with config_file - config_get config_file "$name" config - [ -n "$config_file" ] || return - - # Check there is someething to override - config_get dev "$name" dev - config_get dev_type "$name" dev_type - [ -n "$dev" ] || return - - # If there is a no dev_type, try to guess it - if [ -z "$dev_type" ]; then - . /lib/functions/openvpn.sh - - local odev odev_type - get_openvpn_option "$conf" odev dev - get_openvpn_option "$conf" odev_type dev-type - [ -n "$odev_type" ] || odev_type="$odev" - - case "$odev_type" in - tun*) dev_type="tun" ;; - tap*) dev_type="tap" ;; - *) return;; - esac - fi - - # Return overrides - echo "--dev-type $dev_type --dev $dev" -} - -openvpn_add_instance() { - local name="$1" - local dir="$2" - local conf="$3" - local security="$4" - - procd_open_instance "$name" - procd_set_param command "$PROG" \ - --syslog "openvpn($name)" \ - --status "/var/run/openvpn.$name.status" \ - --cd "$dir" \ - --config "$conf" \ - --up "/usr/libexec/openvpn-hotplug up $name" \ - --down "/usr/libexec/openvpn-hotplug down $name" \ - --script-security "${security:-2}" \ - $(openvpn_get_dev "$name" "$conf") - procd_set_param file "$dir/$conf" - procd_set_param term_timeout 15 - procd_set_param respawn - procd_append_param respawn 3600 - procd_append_param respawn 5 - procd_append_param respawn -1 - procd_close_instance -} - -start_instance() { - local s="$1" - - config_get config "$s" config - config="${config:+$(readlink -f "$config")}" - - section_enabled "$s" || { - append UCI_DISABLED "$config" "$LIST_SEP" - return 1 - } - - local script_security - config_get script_security "$s" script_security - - [ ! -d "/var/run" ] && mkdir -p "/var/run" - - if [ ! -z "$config" ]; then - append UCI_STARTED "$config" "$LIST_SEP" - openvpn_add_instance "$s" "${config%/*}" "$config" "$script_security" - return - fi - - [ ! -d "/var/etc" ] && mkdir -p "/var/etc" - [ -f "/var/etc/openvpn-$s.conf" ] && rm "/var/etc/openvpn-$s.conf" - - append_bools "$s" $OPENVPN_BOOLS - append_params "$s" $OPENVPN_PARAMS - append_list "$s" $OPENVPN_LIST - - openvpn_add_instance "$s" "/var/etc" "openvpn-$s.conf" "$script_security" -} - -start_service() { - local instance="$1" - local instance_found=0 - - config_cb() { - local type="$1" - local name="$2" - if [ "$type" = "openvpn" ]; then - if [ -n "$instance" -a "$instance" = "$name" ]; then - instance_found=1 - fi - fi - } - - . /usr/share/openvpn/openvpn.options - config_load 'openvpn' - - if [ -n "$instance" ]; then - [ "$instance_found" -gt 0 ] || return - start_instance "$instance" - else - config_foreach start_instance 'openvpn' - - local path name - for path in /etc/openvpn/*.conf; do - if [ -f "$path" ]; then - name="${path##*/}"; name="${name%.conf}" - - # don't start configs again that are already started by uci - if echo "$UCI_STARTED" | grep -qxF "$path"; then - continue - - # don't start configs which are set to disabled in uci - elif echo "$UCI_DISABLED" | grep -qxF "$path"; then - logger -t openvpn "$name.conf is disabled in /etc/config/openvpn" - continue - fi - - openvpn_add_instance "$name" "${path%/*}" "$path" - fi - done - fi -} - -service_triggers() { - procd_add_reload_trigger openvpn -} diff --git a/package/network/services/openvpn/files/openvpn.options b/package/network/services/openvpn/files/openvpn.options deleted file mode 100644 index 5d7a387cd3..0000000000 --- a/package/network/services/openvpn/files/openvpn.options +++ /dev/null @@ -1,194 +0,0 @@ -OPENVPN_PARAMS=' -askpass -auth -auth_retry -auth_user_pass -auth_user_pass_verify -bcast_buffers -ca -capath -cd -cert -chroot -cipher -client_config_dir -client_connect -client_disconnect -comp_lzo -compress -connect_freq -connect_retry -connect_retry_max -connect_timeout -crl_verify -dev -dev_node -dev_type -dh -ecdh_curve -echo -engine -explicit_exit_notify -extra_certs -fragment -group -hand_window -hash_size -http_proxy -http_proxy_option -http_proxy_timeout -ifconfig -ifconfig_ipv6 -ifconfig_ipv6_pool -ifconfig_ipv6_push -ifconfig_pool -ifconfig_pool_persist -ifconfig_push -inactive -ipchange -iroute -iroute_ipv6 -keepalive -key -key_direction -key_method -keysize -learn_address -link_mtu -lladdr -local -log -log_append -lport -management -management_log_cache -max_clients -max_routes_per_client -mode -mssfix -mtu_disc -mute -nice -ns_cert_type -ping -ping_exit -ping_restart -pkcs12 -plugin -port -port_share -prng -proto -pull_filter -push -rcvbuf -redirect_gateway -remap_usr1 -remote -remote_cert_eku -remote_cert_ku -remote_cert_tls -reneg_bytes -reneg_pkts -reneg_sec -replay_persist -replay_window -resolv_retry -route -route_delay -route_gateway -route_ipv6 -route_metric -route_pre_down -route_up -rport -secret -server -server_bridge -server_ipv6 -setenv -shaper -sndbuf -socks_proxy -status -status_version -syslog -tcp_queue_limit -tls_auth -tls_crypt -tls_timeout -tls_verify -tls_version_min -tmp_dir -topology -tran_window -tun_mtu -tun_mtu_extra -txqueuelen -user -verb -verify_client_cert -verify_x509_name -x509_username_field -' - -OPENVPN_BOOLS=' -allow_recursive_routing -auth_nocache -auth_user_pass_optional -bind -ccd_exclusive -client -client_to_client -comp_noadapt -disable -disable_occ -down_pre -duplicate_cn -fast_io -float -http_proxy_retry -ifconfig_noexec -ifconfig_nowarn -management_forget_disconnect -management_hold -management_query_passwords -management_signal -mktun -mlock -mtu_test -multihome -mute_replay_warnings -ncp_disable -nobind -opt_verify -passtos -persist_key -persist_local_ip -persist_remote_ip -persist_tun -ping_timer_rem -pull -push_reset -remote_random -rmtun -route_noexec -route_nopull -single_session -socks_proxy_retry -suppress_timestamps -tcp_nodelay -test_crypto -tls_client -tls_exit -tls_server -up_delay -up_restart -username_as_common_name -' - -OPENVPN_LIST=' -ncp_ciphers -tls_cipher -tls_ciphersuites -' diff --git a/package/network/services/openvpn/files/openvpn.upgrade b/package/network/services/openvpn/files/openvpn.upgrade deleted file mode 100644 index 6ae49d22d0..0000000000 --- a/package/network/services/openvpn/files/openvpn.upgrade +++ /dev/null @@ -1 +0,0 @@ -/etc/openvpn/ diff --git a/package/network/services/openvpn/files/usr/libexec/openvpn-hotplug b/package/network/services/openvpn/files/usr/libexec/openvpn-hotplug deleted file mode 100644 index 9235fbacfe..0000000000 --- a/package/network/services/openvpn/files/usr/libexec/openvpn-hotplug +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -ACTION=$1 -shift -INSTANCE=$1 -shift - -export ACTION=$ACTION -export INSTANCE=$INSTANCE -exec /sbin/hotplug-call openvpn "$@" diff --git a/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch b/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch deleted file mode 100644 index 101fa12ba2..0000000000 --- a/package/network/services/openvpn/patches/001-reproducible-remove_DATE.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/src/openvpn/options.c -+++ b/src/openvpn/options.c -@@ -106,7 +106,6 @@ const char title_string[] = - #ifdef HAVE_AEAD_CIPHER_MODES - " [AEAD]" - #endif -- " built on " __DATE__ - ; - - #ifndef ENABLE_SMALL diff --git a/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch b/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch deleted file mode 100644 index cb16a906fe..0000000000 --- a/package/network/services/openvpn/patches/100-mbedtls-disable-runtime-version-check.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/openvpn/ssl_mbedtls.c -+++ b/src/openvpn/ssl_mbedtls.c -@@ -1415,7 +1415,7 @@ const char * - get_ssl_library_version(void) - { - static char mbedtls_version[30]; -- unsigned int pv = mbedtls_version_get_number(); -+ unsigned int pv = MBEDTLS_VERSION_NUMBER; - sprintf( mbedtls_version, "mbed TLS %d.%d.%d", - (pv>>24)&0xff, (pv>>16)&0xff, (pv>>8)&0xff ); - return mbedtls_version; diff --git a/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch b/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch deleted file mode 100644 index c7faf7c0c0..0000000000 --- a/package/network/services/openvpn/patches/110-openssl-dont-use-deprecated-ssleay-symbols.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 17a476fd5c8cc49f1d103a50199e87ede76b1b67 Mon Sep 17 00:00:00 2001 -From: Steffan Karger -Date: Sun, 26 Nov 2017 16:04:00 +0100 -Subject: [PATCH] openssl: don't use deprecated SSLEAY/SSLeay symbols - -Compiling our current master against OpenSSL 1.1 with --DOPENSSL_API_COMPAT=0x10100000L screams bloody murder. This patch fixes -the errors about the deprecated SSLEAY/SSLeay symbols and defines. - -Signed-off-by: Steffan Karger -Acked-by: Gert Doering -Message-Id: <20171126150401.28565-1-steffan@karger.me> -URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg15934.html -Signed-off-by: Gert Doering ---- - configure.ac | 1 + - src/openvpn/openssl_compat.h | 8 ++++++++ - src/openvpn/ssl_openssl.c | 2 +- - 3 files changed, 10 insertions(+), 1 deletion(-) - ---- a/configure.ac -+++ b/configure.ac -@@ -904,6 +904,7 @@ if test "${enable_crypto}" = "yes" -a "$ - EVP_MD_CTX_free \ - EVP_MD_CTX_reset \ - EVP_CIPHER_CTX_reset \ -+ OpenSSL_version \ - SSL_CTX_get_default_passwd_cb \ - SSL_CTX_get_default_passwd_cb_userdata \ - SSL_CTX_set_security_level \ ---- a/src/openvpn/openssl_compat.h -+++ b/src/openvpn/openssl_compat.h -@@ -689,6 +689,14 @@ EC_GROUP_order_bits(const EC_GROUP *grou - #endif - - /* SSLeay symbols have been renamed in OpenSSL 1.1 */ -+#ifndef OPENSSL_VERSION -+#define OPENSSL_VERSION SSLEAY_VERSION -+#endif -+ -+#ifndef HAVE_OPENSSL_VERSION -+#define OpenSSL_version SSLeay_version -+#endif -+ - #if !defined(RSA_F_RSA_OSSL_PRIVATE_ENCRYPT) - #define RSA_F_RSA_OSSL_PRIVATE_ENCRYPT RSA_F_RSA_EAY_PRIVATE_ENCRYPT - #endif ---- a/src/openvpn/ssl_openssl.c -+++ b/src/openvpn/ssl_openssl.c -@@ -2008,7 +2008,7 @@ get_highest_preference_tls_cipher(char * - const char * - get_ssl_library_version(void) - { -- return SSLeay_version(SSLEAY_VERSION); -+ return OpenSSL_version(OPENSSL_VERSION); - } - - #endif /* defined(ENABLE_CRYPTO) && defined(ENABLE_CRYPTO_OPENSSL) */ diff --git a/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch b/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch deleted file mode 100644 index 6a62b16500..0000000000 --- a/package/network/services/openvpn/patches/111-openssl-add-missing-include-statements.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 1987498271abadf042d8bb3feee1fe0d877a9d55 Mon Sep 17 00:00:00 2001 -From: Steffan Karger -Date: Sun, 26 Nov 2017 16:49:12 +0100 -Subject: [PATCH] openssl: add missing #include statements - -Compiling our current master against OpenSSL 1.1 with --DOPENSSL_API_COMPAT=0x10100000L screams bloody murder. This patch fixes -the errors caused by missing includes. Previous openssl versions would -usually include 'the rest of the world', but they're fixing that. So we -should no longer rely on it. - -(And sneaking in alphabetic ordering of the includes while touching them.) - -Signed-off-by: Steffan Karger -Acked-by: Gert Doering -Message-Id: <20171126154912.13283-1-steffan@karger.me> -URL: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg15936.html -Signed-off-by: Gert Doering ---- - src/openvpn/openssl_compat.h | 1 + - src/openvpn/ssl_openssl.c | 6 +++++- - src/openvpn/ssl_verify_openssl.c | 3 ++- - 3 files changed, 8 insertions(+), 2 deletions(-) - ---- a/src/openvpn/openssl_compat.h -+++ b/src/openvpn/openssl_compat.h -@@ -42,6 +42,7 @@ - - #include "buffer.h" - -+#include - #include - #include - ---- a/src/openvpn/ssl_openssl.c -+++ b/src/openvpn/ssl_openssl.c -@@ -52,10 +52,14 @@ - - #include "ssl_verify_openssl.h" - -+#include -+#include -+#include -+#include - #include - #include -+#include - #include --#include - #ifndef OPENSSL_NO_EC - #include - #endif ---- a/src/openvpn/ssl_verify_openssl.c -+++ b/src/openvpn/ssl_verify_openssl.c -@@ -44,8 +44,9 @@ - #include "ssl_verify_backend.h" - #include "openssl_compat.h" - --#include -+#include - #include -+#include - - int - verify_callback(int preverify_ok, X509_STORE_CTX *ctx) diff --git a/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch b/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch deleted file mode 100644 index 5cf5174a9d..0000000000 --- a/package/network/services/openvpn/patches/210-build_always_use_internal_lz4.patch +++ /dev/null @@ -1,74 +0,0 @@ ---- a/configure.ac -+++ b/configure.ac -@@ -1080,68 +1080,15 @@ dnl - AC_ARG_VAR([LZ4_CFLAGS], [C compiler flags for lz4]) - AC_ARG_VAR([LZ4_LIBS], [linker flags for lz4]) - if test "$enable_lz4" = "yes" && test "$enable_comp_stub" = "no"; then -- if test -z "${LZ4_CFLAGS}" -a -z "${LZ4_LIBS}"; then -- # if the user did not explicitly specify flags, try to autodetect -- PKG_CHECK_MODULES([LZ4], -- [liblz4 >= 1.7.1 liblz4 < 100], -- [have_lz4="yes"], -- [LZ4_LIBS="-llz4"] # If this fails, we will do another test next. -- # We also add set LZ4_LIBS otherwise the -- # linker will not know about the lz4 library -- ) -- fi - - saved_CFLAGS="${CFLAGS}" - saved_LIBS="${LIBS}" - CFLAGS="${CFLAGS} ${LZ4_CFLAGS}" - LIBS="${LIBS} ${LZ4_LIBS}" - -- # If pkgconfig check failed or LZ4_CFLAGS/LZ4_LIBS env vars -- # are used, check the version directly in the LZ4 include file -- if test "${have_lz4}" != "yes"; then -- AC_CHECK_HEADERS([lz4.h], -- [have_lz4h="yes"], -- []) -- -- if test "${have_lz4h}" = "yes" ; then -- AC_MSG_CHECKING([additionally if system LZ4 version >= 1.7.1]) -- AC_COMPILE_IFELSE( -- [AC_LANG_PROGRAM([[ --#include -- ]], -- [[ --/* Version encoding: MMNNPP (Major miNor Patch) - see lz4.h for details */ --#if LZ4_VERSION_NUMBER < 10701L --#error LZ4 is too old --#endif -- ]] -- )], -- [ -- AC_MSG_RESULT([ok]) -- have_lz4="yes" -- ], -- [AC_MSG_RESULT([system LZ4 library is too old])] -- ) -- fi -- fi -- -- # Double check we have a few needed functions -- if test "${have_lz4}" = "yes" ; then -- AC_CHECK_LIB([lz4], -- [LZ4_compress_default], -- [], -- [have_lz4="no"]) -- AC_CHECK_LIB([lz4], -- [LZ4_decompress_safe], -- [], -- [have_lz4="no"]) -- fi -- -- if test "${have_lz4}" != "yes" ; then -- AC_MSG_RESULT([ usable LZ4 library or header not found, using version in src/compat/compat-lz4.*]) -- AC_DEFINE([NEED_COMPAT_LZ4], [1], [use copy of LZ4 source in compat/]) -- LZ4_LIBS="" -- fi -+ AC_MSG_RESULT([ usable LZ4 library or header not found, using version in src/compat/compat-lz4.*]) -+ AC_DEFINE([NEED_COMPAT_LZ4], [1], [use copy of LZ4 source in compat/]) -+ LZ4_LIBS="" - OPTIONAL_LZ4_CFLAGS="${LZ4_CFLAGS}" - OPTIONAL_LZ4_LIBS="${LZ4_LIBS}" - AC_DEFINE(ENABLE_LZ4, [1], [Enable LZ4 compression library]) diff --git a/package/network/services/openvpn/patches/220-disable_des.patch b/package/network/services/openvpn/patches/220-disable_des.patch deleted file mode 100644 index 2b8f47a802..0000000000 --- a/package/network/services/openvpn/patches/220-disable_des.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/src/openvpn/syshead.h -+++ b/src/openvpn/syshead.h -@@ -597,11 +597,11 @@ socket_defined(const socket_descriptor_t - /* - * Should we include NTLM proxy functionality - */ --#if defined(ENABLE_CRYPTO) --#define NTLM 1 --#else -+//#if defined(ENABLE_CRYPTO) -+//#define NTLM 1 -+//#else - #define NTLM 0 --#endif -+//#endif - - /* - * Should we include proxy digest auth functionality ---- a/src/openvpn/crypto_mbedtls.c -+++ b/src/openvpn/crypto_mbedtls.c -@@ -319,6 +319,7 @@ int - key_des_num_cblocks(const mbedtls_cipher_info_t *kt) - { - int ret = 0; -+#ifdef MBEDTLS_DES_C - if (kt->type == MBEDTLS_CIPHER_DES_CBC) - { - ret = 1; -@@ -331,6 +332,7 @@ key_des_num_cblocks(const mbedtls_cipher - { - ret = 3; - } -+#endif - - dmsg(D_CRYPTO_DEBUG, "CRYPTO INFO: n_DES_cblocks=%d", ret); - return ret; -@@ -339,6 +341,7 @@ key_des_num_cblocks(const mbedtls_cipher - bool - key_des_check(uint8_t *key, int key_len, int ndc) - { -+#ifdef MBEDTLS_DES_C - int i; - struct buffer b; - -@@ -367,11 +370,15 @@ key_des_check(uint8_t *key, int key_len, - - err: - return false; -+#else -+ return true; -+#endif - } - - void - key_des_fixup(uint8_t *key, int key_len, int ndc) - { -+#ifdef MBEDTLS_DES_C - int i; - struct buffer b; - -@@ -386,6 +393,7 @@ key_des_fixup(uint8_t *key, int key_len, - } - mbedtls_des_key_set_parity(key); - } -+#endif - } - - /* -@@ -705,10 +713,12 @@ cipher_des_encrypt_ecb(const unsigned ch - unsigned char *src, - unsigned char *dst) - { -+#ifdef MBEDTLS_DES_C - mbedtls_des_context ctx; - - ASSERT(mbed_ok(mbedtls_des_setkey_enc(&ctx, key))); - ASSERT(mbed_ok(mbedtls_des_crypt_ecb(&ctx, src, dst))); -+#endif - } - -