ipq806x: add support for TP-Link Talon AD7200
Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon) The Talon AD7200 is basically an Archer C2600 with a third PCIe lane and an 802.11ad radio. It looks like the Archers C2600/5400 but the housing is slightly larger. Specifications -------------- - IPQ8064 dual-core 1400MHz - QCA9988 2.4GHz WiFi - QCA9990 5GHz WiFi - QCA9500 60GHz WiFi - 32MB SPI Flash - 512MiB RAM - 5 GBit Ports (QCA8337) Installation ------------ Installation is possible from the OEM web interface. Sysupgrade is possible. TFTP recovery is possible. - Image: AD7200_1.0_tp_recovery.bin Notes - This will be the first 802.11ad device supported by mainline. Signed-off-by: Gary Cooper <gaco@bitmessage.de>
This commit is contained in:
Gary Cooper
Daniel Golle
parent
6442b8cbc2
commit
1a775a4fd0
|
|
@ -39,6 +39,15 @@ netgear,r7800)
|
|||
ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
|
||||
ucidef_set_led_ide "esata" "eSATA" "white:esata"
|
||||
;;
|
||||
tplink,ad7200)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "blue:usb_1" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "blue:usb_3" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
|
||||
ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
|
||||
ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
|
||||
;;
|
||||
tplink,c2600)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
|
||||
|
|
|
|||
|
|
@ -51,6 +51,7 @@ nec,wg2600hp3)
|
|||
"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
|
||||
;;
|
||||
netgear,r7800 |\
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
|
||||
|
|
|
|||
|
|
@ -35,6 +35,7 @@ case "$FIRMWARE" in
|
|||
caldata_extract "art" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
|
||||
|
|
@ -74,6 +75,7 @@ case "$FIRMWARE" in
|
|||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8)
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ platform_do_upgrade() {
|
|||
linksys,ea8500)
|
||||
platform_do_upgrade_linksys "$1"
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
PART_NAME="os-image:rootfs"
|
||||
MTD_CONFIG_ARGS="-s 0x200000"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,440 @@
|
|||
//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
#include "qcom-ipq8064-v2.0.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TP-Link Talon AD7200";
|
||||
compatible = "tplink,ad7200", "qcom,ipq8064";
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
label-mac-device = &gmac2;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
ledgeneral {
|
||||
label = "ledswitch";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_LIGHTS_TOGGLE>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lan {
|
||||
label = "blue:lan";
|
||||
gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "blue:usb_1";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "blue:usb_3";
|
||||
gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "blue:wps";
|
||||
gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
label = "orange:wan";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_blue {
|
||||
label = "blue:wan";
|
||||
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power: status {
|
||||
label = "blue:status";
|
||||
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "blue:wlan2g";
|
||||
gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "blue:wlan5g";
|
||||
gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
};
|
||||
|
||||
wlan60g {
|
||||
label = "blue:wlan60g";
|
||||
gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio53", "gpio54", "gpio67";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
|
||||
"gpio33", "gpio55", "gpio56", "gpio66";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pin: usb0_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pin: usb1_pwr_en_pin {
|
||||
mux {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gsbi5 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&spi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
SBL1@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
MIBIB@20000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x20000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL2@40000 {
|
||||
label = "SBL2";
|
||||
reg = <0x40000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SBL3@60000 {
|
||||
label = "SBL3";
|
||||
reg = <0x60000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
DDRCONFIG@90000 {
|
||||
label = "DDRCONFIG";
|
||||
reg = <0x90000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
SSD@a0000 {
|
||||
label = "SSD";
|
||||
reg = <0xa0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
TZ@b0000 {
|
||||
label = "TZ";
|
||||
reg = <0xb0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
RPM@e0000 {
|
||||
label = "RPM";
|
||||
reg = <0xe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fs-uboot@100000 {
|
||||
label = "fs-uboot";
|
||||
reg = <0x100000 0x70000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
uboot-env@170000 {
|
||||
label = "uboot-env";
|
||||
reg = <0x170000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
radio@1b0000 {
|
||||
label = "radio";
|
||||
reg = <0x1b0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
os-image@1f0000 {
|
||||
label = "os-image";
|
||||
reg = <0x1f0000 0x400000>;
|
||||
};
|
||||
|
||||
rootfs@5f0000 {
|
||||
label = "rootfs";
|
||||
reg = <0x5f0000 0x1900000>;
|
||||
};
|
||||
|
||||
defaultmac: default-mac@1ef0000 {
|
||||
label = "default-mac";
|
||||
reg = <0x1ef0000 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
pin@1ef0200 {
|
||||
label = "pin";
|
||||
reg = <0x1ef0200 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
device-id@1ef0400 {
|
||||
label = "device-id";
|
||||
reg = <0x1ef0400 0x00200>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
product-info@1ef0600 {
|
||||
label = "product-info";
|
||||
reg = <0x1ef0600 0x0fa00>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition-table@1f00000 {
|
||||
label = "partition-table";
|
||||
reg = <0x1f00000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
soft-version@1f10000 {
|
||||
label = "soft-version";
|
||||
reg = <0x1f10000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
support-list@1f20000 {
|
||||
label = "support-list";
|
||||
reg = <0x1f20000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
profile@1f30000 {
|
||||
label = "profile";
|
||||
reg = <0x1f30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
default-config@1f40000 {
|
||||
label = "default-config";
|
||||
reg = <0x1f40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
user-config@1f50000 {
|
||||
label = "user-config";
|
||||
reg = <0x1f50000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
qos-db@1f90000 {
|
||||
label = "qos-db";
|
||||
reg = <0x1f90000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
usb-config@1fd0000 {
|
||||
label = "usb-config";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
log@1fe0000 {
|
||||
label = "log";
|
||||
reg = <0x1fe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mtd-mac-address = <&defaultmac 0x8>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
mtd-mac-address = <&defaultmac 0x8>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -333,6 +333,21 @@ define Device/qcom_ipq8064-db149
|
|||
endef
|
||||
TARGET_DEVICES += qcom_ipq8064-db149
|
||||
|
||||
define Device/tplink_ad7200
|
||||
$(call Device/TpSafeImage)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := Talon AD7200
|
||||
DEVICE_VARIANT := v1
|
||||
SOC := qcom-ipq8064
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
BOARD_NAME := ad7200
|
||||
SUPPORTED_DEVICES += ad7200
|
||||
TPLINK_BOARD_ID := AD7200
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
|
||||
endef
|
||||
TARGET_DEVICES += tplink_ad7200
|
||||
|
||||
define Device/tplink_c2600
|
||||
$(call Device/TpSafeImage)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
|
|
|
|||
|
|
@ -668,6 +668,50 @@ static struct device_info boards[] = {
|
|||
.last_sysupgrade_partition = "support-list",
|
||||
},
|
||||
|
||||
/** Firmware layout for the AD7200 */
|
||||
{
|
||||
.id = "AD7200",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\r\n"
|
||||
"{product_name:Talon AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
|
||||
.part_trail = 0x00,
|
||||
.soft_ver = NULL,
|
||||
|
||||
.partitions = {
|
||||
{"SBL1", 0x00000, 0x20000},
|
||||
{"MIBIB", 0x20000, 0x20000},
|
||||
{"SBL2", 0x40000, 0x20000},
|
||||
{"SBL3", 0x60000, 0x30000},
|
||||
{"DDRCONFIG", 0x90000, 0x10000},
|
||||
{"SSD", 0xa0000, 0x10000},
|
||||
{"TZ", 0xb0000, 0x30000},
|
||||
{"RPM", 0xe0000, 0x20000},
|
||||
{"fs-uboot", 0x100000, 0x70000},
|
||||
{"uboot-env", 0x170000, 0x40000},
|
||||
{"radio", 0x1b0000, 0x40000},
|
||||
{"os-image", 0x1f0000, 0x400000},
|
||||
{"file-system", 0x5f0000, 0x1900000},
|
||||
{"default-mac", 0x1ef0000, 0x00200},
|
||||
{"pin", 0x1ef0200, 0x00200},
|
||||
{"device-id", 0x1ef0400, 0x00200},
|
||||
{"product-info", 0x1ef0600, 0x0fa00},
|
||||
{"partition-table", 0x1f00000, 0x10000},
|
||||
{"soft-version", 0x1f10000, 0x10000},
|
||||
{"support-list", 0x1f20000, 0x10000},
|
||||
{"profile", 0x1f30000, 0x10000},
|
||||
{"default-config", 0x1f40000, 0x10000},
|
||||
{"user-config", 0x1f50000, 0x40000},
|
||||
{"qos-db", 0x1f90000, 0x40000},
|
||||
{"usb-config", 0x1fd0000, 0x10000},
|
||||
{"log", 0x1fe0000, 0x20000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the C2600 */
|
||||
{
|
||||
.id = "C2600",
|
||||
|
|
|
|||
Loading…
Reference in New Issue