lantiq: add support for TP-Link VR200v

This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48328
This commit is contained in:
Hauke Mehrtens 2016-01-18 20:40:03 +00:00
parent fcfc7eb2ae
commit 13b8b8c2e7
5 changed files with 309 additions and 0 deletions

View File

@ -96,6 +96,13 @@ TDW8970|TDW8980)
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
VR200v)
lan_mac=$(mtd_get_mac_binary romfile 61696)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
ARV7519RW22)
lan_mac=$(mtd_get_mac_binary boardconfig 22)
wan_mac=$(macaddr_add "$lan_mac" 1)

View File

@ -0,0 +1,280 @@
/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "VR200v - TP-LINK Archer VR200v";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power;
failsafe = &power;
dsl = &dsl;
internet = &internet;
usb = &usb;
usb2 = &usb;
};
};
memory@0 {
reg = <0x0 0x7f00000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
phy-rst {
lantiq,pins = "io42";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&romfile 0xf100>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
// gpios = <&gpio 42 1>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 0>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 0>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a2x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 22 1>;
linux,code = <0x198>;
};
wifi {
label = "wifi";
gpios = <&gpio 0 0>;
linux,code = <0xf7>;
linux,input-type = <5>; /* EV_SW */
};
wps {
label = "wps";
gpios = <&gpio 2 1>;
linux,code = <0x211>;
};
dect_paging {
label = "dect_paging";
gpios = <&gpio 39 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "vr200v:blue:power";
gpios = <&gpio 46 1>;
};
dsl: dsl {
label = "vr200v:blue:dsl";
gpios = <&gpio 4 1>;
};
internet: internet {
label = "vr200v:blue:internet";
gpios = <&gpio 5 1>;
};
usb: usb {
label = "vr200v:blue:usb";
gpios = <&gpio 25 1>;
};
eth {
label = "vr200v:blue:lan";
gpios = <&gpio 40 1>;
};
wlan {
label = "vr200v:blue:wlan";
gpios = <&gpio 24 1>;
};
wlan5g {
label = "vr200v:blue:wlan5g";
gpios = <&gpio 20 1>;
};
phone {
label = "vr200v:blue:phone";
gpios = <&gpio 44 1>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <33250000>;
m25p,fast-read;
partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
reg = <0x20000 0xf90000>;
label = "firmware";
};
partition@fb0000 {
reg = <0xfb0000 0x10000>;
label = "radioDECT";
read-only;
};
partition@fc0000 {
reg = <0xfc0000 0x10000>;
label = "config";
read-only;
};
romfile: partition@fd0000 {
reg = <0xfd0000 0x10000>;
label = "romfile";
read-only;
};
partition@fe0000 {
reg = <0xfe0000 0x10000>;
label = "rom";
read-only;
};
partition@ff0000 {
reg = <0xff0000 0x10000>;
label = "radio";
read-only;
};
};
};

View File

@ -413,6 +413,9 @@ Image/Build/Profile/TDW8970=$(call Image/BuildTPLink/$(1),$(1),TDW8970,TD-W8970v
Image/BuildKernel/Profile/TDW8980=$(call Image/BuildKernelTPLink/Template,TDW8980,TD-W8980v1,$(1))
Image/Build/Profile/TDW8980=$(call Image/BuildTPLink/$(1),$(1),TDW8980,TD-W8980v1)
Image/BuildKernel/Profile/VR200v=$(call Image/BuildKernelTPLink/Template,VR200v,ArcherVR200V,$(1))
Image/Build/Profile/VR200v=$(call Image/BuildTPLink/$(1),$(1),VR200v,ArcherVR200V)
Image/BuildKernel/Profile/VGV7510KW22NOR=$(call Image/BuildKernel/Template,VGV7510KW22NOR,$(1))
Image/Build/Profile/VGV7510KW22NOR=$(call Image/Build/$(1),$(1),VGV7510KW22NOR)

View File

@ -11,3 +11,10 @@ define Profile/TDW8980
endef
$(eval $(call Profile,TDW8980))
define Profile/VR200v
NAME:=TP-LINK Archer VR200v
PACKAGES:=kmod-usb-dwc2 kmod-ledtrig-usbdev
endef
$(eval $(call Profile,VR200v))

View File

@ -143,6 +143,12 @@ static struct flash_layout layouts[] = {
.kernel_la = 0x80002000,
.kernel_ep = 0x80002000,
.rootfs_ofs = 0x140000,
}, {
.id = "16Mltq",
.fw_max_len = 0xf90000,
.kernel_la = 0x80002000,
.kernel_ep = 0x800061b0,
.rootfs_ofs = 0x140000,
}, {
.id = "8Mmtk",
.fw_max_len = 0x7a0000,
@ -172,6 +178,12 @@ static struct board_info boards[] = {
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
.id = "ArcherVR200V",
.hw_id = 0x73b70801,
.hw_rev = 0x2f,
.layout_id = "16Mltq",
.hdr_ver = 2,
}, {
/* terminating entry */
}