ramips: add support for I-O DATA WNPR2600G
I-O DATA WNPR2600G is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7615 - 5 GHz : MediaTek MT7615 - Ethernet : 10/100/1000 Mbps - Switch : MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, RX, GND, TX from SoC side - 57600n8 Flash instruction using factory image: 1. Boot WNPR2600G normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
INAGAKI Hiroshi
Chuanhong Guo
parent
c1394dabf6
commit
12ab6ef5c3
|
|
@ -242,6 +242,7 @@ ramips_setup_interfaces()
|
|||
huawei,hg255d|\
|
||||
iodata,wn-ax1167gr|\
|
||||
iodata,wn-gx300gr|\
|
||||
iodata,wnpr2600g|\
|
||||
iptime,a604m)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
||||
|
|
@ -670,6 +671,10 @@ ramips_setup_macs()
|
|||
trendnet,tew-692gr)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
|
||||
;;
|
||||
iodata,wnpr2600g)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
iptime,a3|\
|
||||
iptime,a604m)
|
||||
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,165 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "iodata,wnpr2600g", "mediatek,mt7621-soc";
|
||||
model = "I-O DATA WNPR2600G";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "wnpr2600g:green:power";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
notification {
|
||||
label = "wnpr2600g:green:notification";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "wnpr2600g:green:wlan2g";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "wnpr2600g:green:wlan5g";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
auto {
|
||||
label = "auto";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x030000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x030000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x040000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x050000 0xda0000>;
|
||||
};
|
||||
|
||||
partition@df0000 {
|
||||
label = "manufacture";
|
||||
reg = <0xdf0000 0x190000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "storage";
|
||||
reg = <0xf80000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
mediatek,portmap = "wllll";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart2", "uart3", "jtag", "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -322,6 +322,19 @@ define Device/iodata_wn-gx300gr
|
|||
endef
|
||||
TARGET_DEVICES += iodata_wn-gx300gr
|
||||
|
||||
define Device/iodata_wnpr2600g
|
||||
MTK_SOC := mt7621
|
||||
DEVICE_VENDOR := I-O DATA
|
||||
DEVICE_MODEL := WNPR2600G
|
||||
IMAGE_SIZE := 13952k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := \
|
||||
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
||||
elx-header 0104003a 8844A2D168B45A2D
|
||||
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
||||
endef
|
||||
TARGET_DEVICES += iodata_wnpr2600g
|
||||
|
||||
define Device/lenovo_newifi-d1
|
||||
MTK_SOC := mt7621
|
||||
IMAGE_SIZE := 32448k
|
||||
|
|
|
|||
Loading…
Reference in New Issue