mirror
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Releases Activity

kernel: bump 4.14 to 4.14.48 for 18.06 

Refreshed patches. The following patches were upstreamed and have been deleted:

* target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch
* target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch
* target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch
* target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch

Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
This commit is contained in:
Stijn Segers 2018-06-05 23:29:31 +02:00 committed by John Crispin
parent 6f8eb1b50f
commit 1199a91095
87 changed files with 958 additions and 1243 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@ -5,12 +5,12 @@ LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .121
LINUX_VERSION-4.9 = .106
LINUX_VERSION-4.14 = .43
LINUX_VERSION-4.14 = .48
LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.121 = 44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
LINUX_KERNEL_HASH-4.9.106 = 2d409bb29588ea9a61bae006255ee97a675ded364c87a9ff43f687c5271bbe3c
LINUX_KERNEL_HASH-4.14.43 = 133fc0f8f9ea04006c255a052704e8eb95a021fc799dd27f98fcfcace59e714a
LINUX_KERNEL_HASH-4.14.48 = 80a0608f611fe7a5c54556402cdc2880a21301e1c4e1b19d4c1db82ad2bf22b9
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

6
target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
View File

@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
#include "xhci.h"
#include "xhci-trace.h"
@@ -244,6 +246,458 @@ static void xhci_pme_acpi_rtd3_enable(st
@@ -255,6 +257,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -279,6 +733,22 @@ static int xhci_pci_probe(struct pci_dev
@@ -290,6 +744,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
driver = (struct hc_driver *)id->driver_data;
/* For some HW implementation, a XHCI reset is just not enough... */
@@ -343,6 +813,16 @@ static void xhci_pci_remove(struct pci_d
@@ -354,6 +824,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;

2
target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch
View File

@ -13,7 +13,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -202,7 +202,7 @@ static void xhci_pci_quirks(struct devic
@@ -213,7 +213,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)

2
target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
View File

@ -129,7 +129,7 @@ it on BCM4708 family.
+++ b/drivers/usb/host/xhci.h
@@ -1831,6 +1831,7 @@ struct xhci_hcd {
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
/* Reserved. It was XHCI_U2_DISABLE_WAKE */
#define XHCI_U2_DISABLE_WAKE (1 << 27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
+#define XHCI_FAKE_DOORBELL (1 << 29)
#define XHCI_SUSPEND_DELAY (1 << 30)

2
target/linux/generic/backport-4.14/011-kbuild-export-SUBARCH.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/Makefile
+++ b/Makefile
@@ -433,8 +433,8 @@ KBUILD_CFLAGS_MODULE := -DMODULE
@@ -428,8 +428,8 @@ KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
GCC_PLUGINS_CFLAGS :=

2
target/linux/generic/backport-4.14/272-uapi-if_ether.h-prevent-redefinition-of-struct-ethhd.patch
View File

@ -26,7 +26,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
/*
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
@@ -149,11 +150,13 @@
@@ -150,11 +151,13 @@
* This is an Ethernet frame header.
*/

2
target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch
View File

@ -11,7 +11,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -829,6 +829,7 @@ static void clusterip_net_exit(struct ne
@@ -834,6 +834,7 @@ static void clusterip_net_exit(struct ne
cn->procdir = NULL;
#endif
nf_unregister_net_hook(net, &cip_arp_ops);

2
target/linux/generic/hack-4.14/202-reduce_module_size.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/Makefile
+++ b/Makefile
@@ -430,7 +430,7 @@ KBUILD_AFLAGS_KERNEL :=
@@ -425,7 +425,7 @@ KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE

4
target/linux/generic/hack-4.14/207-disable-modorder.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/Makefile
+++ b/Makefile
@@ -1233,7 +1233,6 @@ all: modules
@@ -1227,7 +1227,6 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
@@ -1262,7 +1261,6 @@ _modinst_:
@@ -1256,7 +1255,6 @@ _modinst_:
rm -f $(MODLIB)/build ; \
ln -s $(CURDIR) $(MODLIB)/build ; \
fi

2
target/linux/generic/hack-4.14/220-gc_sections.patch
View File

@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
@@ -787,11 +792,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
@@ -781,11 +786,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
endif

6
target/linux/generic/hack-4.14/773-bgmac-add-srab-switch.patch
View File

@ -32,7 +32,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
#include <linux/bcm47xx_nvram.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
@@ -1410,6 +1411,17 @@ static const struct ethtool_ops bgmac_et
.set_link_ksettings = phy_ethtool_set_link_ksettings,
};
@ -50,7 +50,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
/**************************************************
* MII
**************************************************/
@@ -1538,6 +1550,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
@ -65,7 +65,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
@@ -1560,6 +1580,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
@@ -1561,6 +1581,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{

2
target/linux/generic/hack-4.14/901-debloat_sock_diag.patch
View File

@ -66,7 +66,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static void __sk_free(struct sock *sk)
{
+#ifdef CONFIG_SOCK_DIAG
if (unlikely(sock_diag_has_destroy_listeners(sk) && sk->sk_net_refcnt))
if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
sock_diag_broadcast_destroy(sk);
else
+#endif

2
target/linux/generic/hack-4.14/902-debloat_proc.patch
View File

@ -243,7 +243,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
}
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void)
@@ -1946,10 +1946,12 @@ void __init init_mm_internals(void)
start_shepherd_timer();
#endif
#ifdef CONFIG_PROC_FS

23
target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch
View File

@ -1,23 +0,0 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Wed, 21 Feb 2018 13:40:12 +0100
Subject: [PATCH] clocksource: mips-gic-timer: fix clocksource counter width
This code needs to use ffs instead of fls on the mask to determine the
shift for reading the GIC_CONFIG_COUNTBITS field.
Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -164,7 +164,7 @@ static int __init __gic_clocksource_init
/* Set clocksource mask. */
count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
- count_width >>= __fls(GIC_CONFIG_COUNTBITS);
+ count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
count_width *= 4;
count_width += 32;
gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);

90
target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch
View File

@ -1,90 +0,0 @@
From patchwork Thu Apr 26 23:28:34 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v2] MIPS: c-r4k: fix data corruption related to cache coherence.
X-Patchwork-Submitter: NeilBrown <neil@brown.name>
X-Patchwork-Id: 19259
Message-Id: <87vacdlf8d.fsf@notabene.neil.brown.name>
To: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>, linux-mips@linux-mips.org,
linux-kernel@vger.kernel.org
Date: Fri, 27 Apr 2018 09:28:34 +1000
From: NeilBrown <neil@brown.name>
List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
When DMA will be performed to a MIPS32 1004K CPS, the
L1-cache for the range needs to be flushed and invalidated
first.
The code currently takes one of two approaches.
1/ If the range is less than the size of the dcache, then
HIT type requests flush/invalidate cache lines for the
particular addresses. HIT-type requests a globalised
by the CPS so this is safe on SMP.
2/ If the range is larger than the size of dcache, then
INDEX type requests flush/invalidate the whole cache.
INDEX type requests affect the local cache only. CPS
does not propagate them in any way. So this invalidation
is not safe on SMP CPS systems.
Data corruption due to '2' can quite easily be demonstrated by
repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum
a file that is several times the size of available memory.
Dropping caches means that large contiguous extents (large than
dcache) are more likely.
This was not a problem before Linux-4.8 because option 2 was
never used if CONFIG_MIPS_CPS was defined. The commit
which removed that apparently didn't appreciate the full
consequence of the change.
We could, in theory, globalize the INDEX based flush by sending an IPI
to other cores. These cache invalidation routines can be called with
interrupts disabled and synchronous IPI require interrupts to be
enabled. Asynchronous IPI may not trigger writeback soon enough.
So we cannot use IPI in practice.
We can already test is IPI would be needed for an INDEX operation
with r4k_op_needs_ipi(R4K_INDEX). If this is True then we mustn't try
the INDEX approach as we cannot use IPI. If this is False (e.g. when
there is only one core and hence one L1 cache) then it is safe to
use the INDEX approach without IPI.
This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
eliminates the corruption.
Fixes: c00ab4896ed5 ("MIPS: Remove cpu_has_safe_index_cacheops")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: NeilBrown <neil@brown.name>
---
arch/mips/mm/c-r4k.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsi
/*
* Either no secondary cache or the available caches don't have the
* subset property so we have to flush the primary caches
- * explicitly
+ * explicitly.
+ * If we would need IPI to perform an INDEX-type operation, then
+ * we have to use the HIT-type alternative as IPI cannot be used
+ * here due to interrupts possibly being disabled.
*/
- if (size >= dcache_size) {
+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned l
return;
}
- if (size >= dcache_size) {
+ if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;

6
target/linux/generic/pending-4.14/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
View File

@ -8,7 +8,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -756,6 +756,24 @@ static int jffs2_mknod (struct inode *di
@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
return ret;
}
@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
struct inode *new_dir_i, struct dentry *new_dentry,
unsigned int flags)
@@ -766,7 +784,7 @@ static int jffs2_rename (struct inode *o
@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
uint8_t type;
uint32_t now;
@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
return -EINVAL;
/* The VFS will check for us and prevent trying to rename a
@@ -832,9 +850,14 @@ static int jffs2_rename (struct inode *o
@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
if (d_is_dir(old_dentry) && !victim_f)
inc_nlink(new_dir_i);

8
target/linux/generic/pending-4.14/141-jffs2-add-RENAME_EXCHANGE-support.patch
View File

@ -6,7 +6,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -781,18 +781,31 @@ static int jffs2_rename (struct inode *o
@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
int ret;
struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
struct jffs2_inode_info *victim_f = NULL;
@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
if (d_is_dir(new_dentry)) {
struct jffs2_full_dirent *fd;
@@ -827,7 +840,7 @@ static int jffs2_rename (struct inode *o
@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
if (ret)
return ret;
@ -49,7 +49,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* There was a victim. Kill it off nicely */
if (d_is_dir(new_dentry))
clear_nlink(d_inode(new_dentry));
@@ -853,6 +866,12 @@ static int jffs2_rename (struct inode *o
@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
if (flags & RENAME_WHITEOUT)
/* Replace with whiteout */
ret = jffs2_whiteout(old_dir_i, old_dentry);
@ -62,7 +62,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
else
/* Unlink the original */
ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
@@ -884,7 +903,7 @@ static int jffs2_rename (struct inode *o
@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
return ret;
}

61
target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
View File

@ -1,61 +0,0 @@
From d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 Mon Sep 17 00:00:00 2001
From: Giuseppe Lippolis <giu.lippolis@gmail.com>
Date: Mon, 26 Mar 2018 16:34:39 +0200
Subject: [PATCH] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
This modem is embedded on dlink dwr-921 router.
The oem configuration states:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=0918 Rev= 2.32
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/usb/qmi_wwan.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1105,6 +1105,9 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
{QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
+ {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */
+ {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */
+ {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */
{QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
{QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
{QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */

28
target/linux/generic/pending-4.14/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch
View File

@ -1,28 +0,0 @@
From 743989254ea9f132517806d8893ca9b6cf9dc86b Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sat, 24 Mar 2018 22:08:14 +0100
Subject: [PATCH] net: qmi_wwan: add BroadMobi BM806U 2020:2033
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.
Tested on 4.14 kernel and OpenWRT.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1184,6 +1184,7 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
{QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */
{QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */
+ {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */
{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
{QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */

2
target/linux/generic/pending-4.14/201-extra_optimization.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/Makefile
+++ b/Makefile
@@ -650,12 +650,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
@@ -645,12 +645,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)

6
target/linux/generic/pending-4.14/630-packet_socket_type.patch
View File

@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -3260,6 +3262,7 @@ static int packet_create(struct net *net
@@ -3262,6 +3264,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
@@ -3873,6 +3876,16 @@ packet_setsockopt(struct socket *sock, i
@@ -3875,6 +3878,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
default:
return -ENOPROTOOPT;
}
@@ -3925,6 +3938,13 @@ static int packet_getsockopt(struct sock
@@ -3927,6 +3940,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;

10
target/linux/generic/pending-4.14/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
View File

@ -413,7 +413,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
}
static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
@@ -2060,6 +2271,12 @@ static void ip6_tnl_dellink(struct net_d
@@ -2064,6 +2275,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
@ -426,7 +426,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
@@ -2089,6 +2306,24 @@ static size_t ip6_tnl_get_size(const str
@@ -2093,6 +2310,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(0) +
/* IFLA_IPTUN_FWMARK */
nla_total_size(4) +
@ -451,7 +451,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
0;
}
@@ -2096,6 +2331,9 @@ static int ip6_tnl_fill_info(struct sk_b
@@ -2100,6 +2335,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
@ -461,7 +461,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
@@ -2105,9 +2343,27 @@ static int ip6_tnl_fill_info(struct sk_b
@@ -2109,9 +2347,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
@ -490,7 +490,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
@@ -2147,6 +2403,7 @@ static const struct nla_policy ip6_tnl_p
@@ -2151,6 +2407,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },
[IFLA_IPTUN_FWMARK] = { .type = NLA_U32 },

22
target/linux/generic/pending-4.14/811-pci_disable_usb_common_quirks.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -107,6 +107,8 @@ struct amd_chipset_type {
@@ -124,6 +124,8 @@ struct amd_chipset_type {
u8 rev;
};
@ -19,7 +19,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static struct amd_chipset_info {
struct pci_dev *nb_dev;
struct pci_dev *smbus_dev;
@@ -511,6 +513,10 @@ void usb_amd_dev_put(void)
@@ -528,6 +530,10 @@ void usb_amd_dev_put(void)
}
EXPORT_SYMBOL_GPL(usb_amd_dev_put);
@ -28,9 +28,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
+
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -590,8 +596,17 @@ reset_needed:
* Check if port is disabled in BIOS on AMD Promontory host.
* BIOS Disabled ports may wake on connect/disconnect and need
@@ -699,8 +705,17 @@ reset_needed:
uhci_reset_hc(pdev, base);
return 1;
}
@ -48,7 +48,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
u16 cmd;
@@ -1178,3 +1193,4 @@ bool usb_xhci_needs_pci_reset(struct pci
@@ -1287,3 +1302,4 @@ bool usb_xhci_needs_pci_reset(struct pci
return false;
}
EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);
@ -65,8 +65,8 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
int usb_amd_find_chipset_info(void);
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
@@ -19,12 +22,29 @@ void sb800_prefetch(struct device *dev,
bool usb_xhci_needs_pci_reset(struct pci_dev *pdev);
@@ -20,12 +23,29 @@ bool usb_xhci_needs_pci_reset(struct pci
bool usb_amd_pt_check_port(struct device *device, int port);
#else
struct pci_dev;
+static inline int usb_amd_find_chipset_info(void)
@ -92,9 +92,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
+{
+ return false;
+}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -465,7 +465,14 @@ extern int usb_hcd_pci_probe(struct pci_

8
target/linux/generic/pending-4.14/834-ledtrig-libata.patch
View File

@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
@@ -5114,6 +5127,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
@@ -6015,6 +6031,9 @@ struct ata_port *ata_port_alloc(struct a
@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
@ -85,7 +85,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ata_sff_port_init(ap);
return ap;
@@ -6036,6 +6055,12 @@ static void ata_host_release(struct devi
@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
@ -98,7 +98,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
kfree(ap);
host->ports[i] = NULL;
}
@@ -6482,7 +6507,23 @@ int ata_host_register(struct ata_host *h
@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}

22
target/linux/ipq40xx/patches-4.14/040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch
View File

@ -114,7 +114,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
struct list_head node;
};
@@ -539,7 +544,7 @@ static void bam_free_chan(struct dma_cha
@@ -540,7 +545,7 @@ static void bam_free_chan(struct dma_cha
vchan_free_chan_resources(to_virt_chan(chan));
@ -123,7 +123,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
goto err;
}
@@ -632,8 +637,6 @@ static struct dma_async_tx_descriptor *b
@@ -633,8 +638,6 @@ static struct dma_async_tx_descriptor *b
if (flags & DMA_PREP_INTERRUPT)
async_desc->flags |= DESC_FLAG_EOT;
@ -132,7 +132,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
async_desc->num_desc = num_alloc;
async_desc->curr_desc = async_desc->desc;
@@ -684,14 +687,16 @@ err_out:
@@ -685,14 +688,16 @@ err_out:
static int bam_dma_terminate_all(struct dma_chan *chan)
{
struct bam_chan *bchan = to_bam_chan(chan);
@ -152,7 +152,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
}
vchan_get_all_descriptors(&bchan->vc, &head);
@@ -763,9 +768,9 @@ static int bam_resume(struct dma_chan *c
@@ -764,9 +769,9 @@ static int bam_resume(struct dma_chan *c
*/
static u32 process_channel_irqs(struct bam_device *bdev)
{
@ -164,7 +164,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
@@ -785,27 +790,40 @@ static u32 process_channel_irqs(struct b
@@ -786,27 +791,40 @@ static u32 process_channel_irqs(struct b
writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
spin_lock_irqsave(&bchan->vc.lock, flags);
@ -214,7 +214,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
}
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -867,6 +885,7 @@ static enum dma_status bam_tx_status(str
@@ -868,6 +886,7 @@ static enum dma_status bam_tx_status(str
struct dma_tx_state *txstate)
{
struct bam_chan *bchan = to_bam_chan(chan);
@ -222,7 +222,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
struct virt_dma_desc *vd;
int ret;
size_t residue = 0;
@@ -882,11 +901,17 @@ static enum dma_status bam_tx_status(str
@@ -883,11 +902,17 @@ static enum dma_status bam_tx_status(str
spin_lock_irqsave(&bchan->vc.lock, flags);
vd = vchan_find_desc(&bchan->vc, cookie);
@ -244,7 +244,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -927,63 +952,86 @@ static void bam_start_dma(struct bam_cha
@@ -928,63 +953,86 @@ static void bam_start_dma(struct bam_cha
{
struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
struct bam_device *bdev = bchan->bdev;
@ -367,7 +367,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
/* ensure descriptor writes and dma start not reordered */
wmb();
@@ -1012,7 +1060,7 @@ static void dma_tasklet(unsigned long da
@@ -1013,7 +1061,7 @@ static void dma_tasklet(unsigned long da
bchan = &bdev->channels[i];
spin_lock_irqsave(&bchan->vc.lock, flags);
@ -376,7 +376,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
}
@@ -1033,7 +1081,7 @@ static void bam_issue_pending(struct dma
@@ -1034,7 +1082,7 @@ static void bam_issue_pending(struct dma
spin_lock_irqsave(&bchan->vc.lock, flags);
/* if work pending and idle, start a transaction */
@ -385,7 +385,7 @@ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -1133,6 +1181,7 @@ static void bam_channel_init(struct bam_
@@ -1138,6 +1186,7 @@ static void bam_channel_init(struct bam_
vchan_init(&bchan->vc, &bdev->common);
bchan->vc.desc_free = bam_dma_free_desc;

34
target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
View File

@ -33,22 +33,22 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
- clock-names: Must contain "core" for the core clock and "iface" for the
interface clock.
@@ -22,7 +21,7 @@ Example:
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
compatible = "qcom,adm";
reg = <0x18300000 0x100000>;
interrupts = <0 170 0>;
- #dma-cells = <2>;
+ #dma-cells = <1>;
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
clock-names = "core", "iface";
@@ -35,15 +34,12 @@ Example:
qcom,ee = <0>;
};
qcom,ee = <0>;
};
-DMA clients must use the format descripted in the dma.txt file, using a three
+DMA clients must use the format descripted in the dma.txt file, using a two
cell specifier for each channel.
-Each dmas request consists of 3 cells:
+Each dmas request consists of two cells:
1. phandle pointing to the DMA controller
@ -56,16 +56,16 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
- The CRCI is used for flow control. It identifies the peripheral device that
- is the source/destination for the transferred data.
Example:
@@ -55,7 +51,7 @@ Example:
cs-gpios = <&qcom_pinmux 20 0>;
cs-gpios = <&qcom_pinmux 20 0>;
- dmas = <&adm_dma 6 9>,
- <&adm_dma 5 10>;
+ dmas = <&adm_dma 6>,
+ <&adm_dma 5>;
dma-names = "rx", "tx";
};
dma-names = "rx", "tx";
};

6
target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
View File

@ -27,9 +27,9 @@ Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -27,3 +27,13 @@ config QCOM_HIDMA
(user to kernel, kernel to kernel, etc.). It only supports
memcpy interface. The core is not intended for general
purpose slave DMA.
(user to kernel, kernel to kernel, etc.). It only supports
memcpy interface. The core is not intended for general
purpose slave DMA.
+
+config QCOM_ADM
+ tristate "Qualcomm ADM support"

30
target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
View File

@ -13,28 +13,28 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_PARENT_GATE,
+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
},
},
},
},
};
@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
},
.num_parents = 1,
.ops = &clk_branch_ops,
},
.num_parents = 1,
.ops = &clk_branch_ops,
- .flags = CLK_SET_RATE_PARENT,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
},
},
},
};
@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
.hw.init = &(struct clk_init_data){
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
.hw.init = &(struct clk_init_data){
.name = "gsbi1_h_clk",
.ops = &clk_branch_ops,
+ .flags = CLK_IGNORE_UNUSED,
},
},
},
},
};

10
target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
View File

@ -19,9 +19,9 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_QCOM_SMEM_PARTS
+ tristate "QCOM SMEM partitioning support"
+ depends on QCOM_SMEM
@ -30,7 +30,7 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
+ such as IPQ806x.
+
comment "User Modules And Translation Layers"
#
--- /dev/null
+++ b/drivers/mtd/qcom_smem_part.c
@ -278,5 +278,5 @@ Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
obj-y += parsers/
# 'Users' - code which presents functionality to userspace.

10
target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
View File

@ -13,10 +13,10 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -56,3 +56,15 @@
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
select GENERIC_PHY
help
Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_DWC3
+ tristate "QCOM DWC3 USB PHY support"
@ -31,7 +31,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -8,3 +8,4 @@
@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o

11
target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
View File

@ -20,9 +20,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
select ARM_AMBA
select PINCTRL
select QCOM_SCM if SMP
select ARM_AMBA
select PINCTRL
select QCOM_SCM if SMP
+ select PCI_DOMAINS if PCI
help
Support for Qualcomm's devicetree based systems.
help
Support for Qualcomm's devicetree based systems.

12
target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch
View File

@ -42,19 +42,19 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -7,6 +7,9 @@ config DMABOUNCE
bool
select ZONE_DMA
bool
select ZONE_DMA
+config KRAIT_L2_ACCESSORS
+ bool
+
config SHARP_LOCOMO
bool
bool
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -7,6 +7,7 @@ obj-y += firmware.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o

100
target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
View File

@ -34,13 +34,13 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
@@ -26,35 +26,24 @@
* parent - parent is adjustable through clk_set_parent
*/
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags)
{
- struct clk_mux *mux = to_clk_mux(hw);
int num_parents = clk_hw_get_num_parents(hw);
int num_parents = clk_hw_get_num_parents(hw);
- u32 val;
-
- /*
@ -52,40 +52,40 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
- */
- val = clk_readl(mux->reg) >> mux->shift;
- val &= mux->mask;
- if (mux->table) {
+ if (table) {
int i;
for (i = 0; i < num_parents; i++)
int i;
for (i = 0; i < num_parents; i++)
- if (mux->table[i] == val)
+ if (table[i] == val)
return i;
return -EINVAL;
}
return i;
return -EINVAL;
}
- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+ if (val && (flags & CLK_MUX_INDEX_BIT))
val = ffs(val) - 1;
val = ffs(val) - 1;
- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+ if (val && (flags & CLK_MUX_INDEX_ONE))
val--;
if (val >= num_parents)
val--;
if (val >= num_parents)
@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
return val;
return val;
}
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
u32 val;
struct clk_mux *mux = to_clk_mux(hw);
u32 val;
- unsigned long flags = 0;
- if (mux->table) {
- index = mux->table[index];
+ /*
@ -108,18 +108,18 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+
+ if (table) {
+ val = table[val];
} else {
} else {
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = 1 << index;
+ if (flags & CLK_MUX_INDEX_BIT)
+ val = 1 << index;
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ if (flags & CLK_MUX_INDEX_ONE)
+ val++;
}
}
+ return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
@ -132,64 +132,64 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+
+ index = clk_mux_reindex(index, mux->table, mux->flags);
+
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
else
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
else
@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
}
const struct clk_ops clk_mux_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
.set_parent = clk_mux_set_parent,
.determine_rate = __clk_mux_determine_rate,
.set_parent = clk_mux_set_parent,
.determine_rate = __clk_mux_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
const struct clk_ops clk_mux_ro_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
};
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
const char * const *parent_names, u8 num_parents,
unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
const char * const *parent_names, u8 num_parents,
unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
{
struct clk_mux *mux;
struct clk_hw *hw;
struct clk_mux *mux;
struct clk_hw *hw;
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
struct clk_hw hw;
void __iomem *reg;
- u32 *table;
+ unsigned int *table;
u32 mask;
u8 shift;
u8 flags;
u32 mask;
u8 shift;
u8 flags;
@@ -486,6 +486,11 @@ struct clk_mux {
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+ unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+ unsigned long flags);
+
struct clk *clk_register_mux(struct device *dev, const char *name,
const char * const *parent_names, u8 num_parents,
unsigned long flags,
const char * const *parent_names, u8 num_parents,
unsigned long flags,
@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
const char * const *parent_names, u8 num_parents,
unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
const char * const *parent_names, u8 num_parents,
unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
void clk_unregister_mux(struct clk *clk);
void clk_hw_unregister_mux(struct clk_hw *hw);

2
target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
View File

@ -36,7 +36,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,253 @@

6
target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch
View File

@ -77,9 +77,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -196,3 +196,11 @@ config MSM_MMCC_8996
Support for the multimedia clock controller on msm8996 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
Support for the multimedia clock controller on msm8996 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"

18
target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
View File

@ -30,12 +30,12 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll0 = {
@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
},
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
@ -115,15 +115,15 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+};
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
[NSSTCM_CLK] = &nss_tcm_clk.clkr,
[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
[NSSTCM_CLK] = &nss_tcm_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {

6
target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch
View File

@ -34,9 +34,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -204,3 +204,7 @@ config QCOM_HFPLL
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+
+config KRAIT_CLOCKS
+ bool

28
target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
View File

@ -35,9 +35,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -21,10 +21,17 @@ PROPERTIES
the register region. An optional second element specifies
the base address and size of the alias register region.
the register region. An optional second element specifies
the base address and size of the alias register region.
+- clock-output-names:
+ Usage: optional
+ Value type: <string>
@ -45,13 +45,13 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+ CPU number starting at 0.
+
Example:
clock-controller@2088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x02088000 0x1000>,
<0x02008000 0x1000>;
clock-controller@2088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x02088000 0x1000>,
<0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
};
};
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
@@ -0,0 +1,28 @@
@ -86,9 +86,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -205,6 +205,14 @@ config QCOM_HFPLL
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+config KPSS_XCC
+ tristate "KPSS Clock Controller"
+ depends on COMMON_CLK_QCOM
@ -98,8 +98,8 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+ as MSM8960, APQ8064, etc.
+
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
bool
select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8

10
target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch
View File

@ -60,9 +60,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -213,6 +213,14 @@ config KPSS_XCC
if you want to support CPU frequency scaling on devices such
as MSM8960, APQ8064, etc.
if you want to support CPU frequency scaling on devices such
as MSM8960, APQ8064, etc.
+config KRAITCC
+ tristate "Krait Clock Controller"
+ depends on COMMON_CLK_QCOM && ARM
@ -72,8 +72,8 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+ Say Y if you want to support CPU frequency scaling.
+
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
bool
select KRAIT_L2_ACCESSORS
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o

86
target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch
View File

@ -31,32 +31,32 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
if (__clk_is_enabled(hw->clk))
__krait_mux_set_sel(mux, sel);
if (__clk_is_enabled(hw->clk))
__krait_mux_set_sel(mux, sel);
+ mux->reparent = true;
+
return 0;
return 0;
}
--- a/drivers/clk/qcom/clk-krait.h
+++ b/drivers/clk/qcom/clk-krait.h
@@ -23,6 +23,9 @@ struct krait_mux_clk {
u32 shift;
u32 en_mask;
bool lpl;
u32 shift;
u32 en_mask;
bool lpl;
+ u8 safe_sel;
+ u8 old_index;
+ bool reparent;
struct clk_hw hw;
struct notifier_block clk_nb;
struct clk_hw hw;
struct notifier_block clk_nb;
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
0,
0,
};
+/*
+ * Notifier function for switching the muxes to safe parent
+ * while the hfpll is getting reprogrammed.
@ -105,56 +105,56 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
{
@@ -79,6 +122,7 @@ static int
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
unsigned int offset, bool unique_aux)
{
+ int ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"acpu_aux",
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"acpu_aux",
@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
mux->shift = 2;
mux->parent_map = sec_mux_map;
mux->hw.init = &init;
mux->shift = 2;
mux->parent_map = sec_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 0;
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
clk = devm_clk_register(dev, &mux->hw);
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto unique_aux;
+
+unique_aux:
if (unique_aux)
kfree(sec_mux_list[0]);
if (unique_aux)
kfree(sec_mux_list[0]);
err_aux:
@@ -128,6 +178,7 @@ static struct clk *
krait_add_pri_mux(struct device *dev, int id, const char *s,
unsigned int offset)
unsigned int offset)
{
+ int ret;
struct krait_mux_clk *mux;
const char *p_names[3];
struct clk_init_data init = {
struct krait_mux_clk *mux;
const char *p_names[3];
struct clk_init_data init = {
@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
mux->lpl = id >= 0;
mux->parent_map = pri_mux_map;
mux->hw.init = &init;
mux->lpl = id >= 0;
mux->parent_map = pri_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 2;
init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
if (!init.name)
init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
if (!init.name)
@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
clk = devm_clk_register(dev, &mux->hw);
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto err_p3;
+err_p3:
kfree(p_names[2]);
kfree(p_names[2]);
err_p2:
kfree(p_names[1]);
kfree(p_names[1]);

12
target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
View File

@ -73,9 +73,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS
+config ARM_QCOM_CPUFREQ
+ tristate "Qualcomm based"
+ depends on ARCH_QCOM
@ -86,11 +86,11 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+ If in doubt, say N.
+
config ARM_S3C_CPUFREQ
bool
help
bool
help
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt81
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += me
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o

29
target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch
View File

@ -29,31 +29,31 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p
}
if (fallback) {
}
if (fallback) {
- cpumask_setall(policy->cpus);
+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
+
+ if (!pd || !pd->independent_clocks)
+ cpumask_setall(policy->cpus);
/*
* OPP tables are initialized only for policy->cpu, do it for
/*
* OPP tables are initialized only for policy->cpu, do it for
@@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf
if (data && data->have_governor_per_policy)
dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
if (data && data->have_governor_per_policy)
dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+ dt_cpufreq_driver.driver_data = data;
+
ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
dev_err(&pdev->dev, "failed register driver: %d\n", ret);
ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
dev_err(&pdev->dev, "failed register driver: %d\n", ret);
--- a/drivers/cpufreq/cpufreq-dt.h
+++ b/drivers/cpufreq/cpufreq-dt.h
@@ -13,6 +13,12 @@
#include <linux/types.h>
struct cpufreq_dt_platform_data {
+ /*
+ * True when each CPU has its own clock to control its
@ -61,5 +61,6 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+ * clock.
+ */
+ bool independent_clocks;
bool have_governor_per_policy;
bool have_governor_per_policy;
};

26
target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch
View File

@ -28,38 +28,38 @@ Signed-off-by: Archit Taneja <architt@codeaurora.org>
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
} else {
ops.len = ops.ooblen = 1;
}
} else {
ops.len = ops.ooblen = 1;
}
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
/* Write to first/last page(s) if necessary */
if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
/* Write to first/last page(s) if necessary */
if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
+ ops.mode = MTD_OPS_RAW;
+ else
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < numpages; j++) {
/*
for (j = 0; j < numpages; j++) {
/*
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -116,6 +116,12 @@ struct nand_bbt_descr {
#define NAND_BBT_NO_OOB_BBM 0x00080000
/*
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,

24
target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
View File

@ -10,17 +10,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -1277,11 +1277,13 @@
if (!opp_table)
return ERR_PTR(-ENOMEM);
@@ -1277,11 +1277,13 @@ struct opp_table *dev_pm_opp_set_regulat
if (!opp_table)
return ERR_PTR(-ENOMEM);
+#if 0
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
ret = -EBUSY;
goto err;
}
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
ret = -EBUSY;
goto err;
}
+#endif
/* Already have regulators set */
if (opp_table->regulators) {
/* Already have regulators set */
if (opp_table->regulators) {

20
target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
View File

@ -27,9 +27,9 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -1605,6 +1605,83 @@ unlock:
@@ -1605,6 +1605,83 @@ put_table:
}
/**
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
+ * @dev: device for which we do this operation
@ -114,27 +114,27 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -25,6 +25,7 @@ struct opp_table;
enum dev_pm_opp_event {
OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ OPP_EVENT_ADJUST_VOLTAGE,
};
/**
@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
unsigned long u_volt);
unsigned long u_volt);
void dev_pm_opp_remove(struct device *dev, unsigned long freq);
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt);
+
int dev_pm_opp_enable(struct device *dev, unsigned long freq);
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
{
}
+static inline int
+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+ unsigned long u_volt)
@ -144,4 +144,4 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+
static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
{
return 0;
return 0;

9
target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
+struct regulator *dev_pm_opp_get_regulator(struct device *dev)
+{
+ struct opp_table *opp_table;
@ -42,10 +42,11 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* @opp: opp for which turbo mode is being verified
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -85,6 +85,7 @@ enum dev_pm_opp_event {
@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp
unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
+struct regulator *dev_pm_opp_get_regulator(struct device *dev);
bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);

24
target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
View File

@ -18,21 +18,21 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev
struct opp_table *opp_table;
struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
int r = 0;
struct opp_table *opp_table;
struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
int r = 0;
+ unsigned long tol;
/* keep the node allocated */
new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
/* keep the node allocated */
new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev
/* plug in new node */
new_opp->supplies[0].u_volt = u_volt;
/* plug in new node */
new_opp->supplies[0].u_volt = u_volt;
+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
+ new_opp->supplies[0].u_volt = u_volt;
+ new_opp->supplies[0].u_volt_min = u_volt - tol;
+ new_opp->supplies[0].u_volt_max = u_volt + tol;
list_replace(&opp->node, &new_opp->node);
mutex_unlock(&opp_table_lock);
list_replace(&opp->node, &new_opp->node);
mutex_unlock(&opp_table_lock);

32
target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch
View File

@ -12,29 +12,29 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
{ }
{ }
};
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
@ -44,12 +44,12 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
{ }
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);

64
target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
View File

@ -26,19 +26,19 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -32,6 +32,9 @@ struct private_data {
struct device *cpu_dev;
struct thermal_cooling_device *cdev;
const char *reg_name;
struct device *cpu_dev;
struct thermal_cooling_device *cdev;
const char *reg_name;
+ struct notifier_block opp_nb;
+ struct mutex lock;
+ unsigned long opp_freq;
};
static struct freq_attr *cpufreq_dt_attr[] = {
@@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr
static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct private_data *priv = policy->driver_data;
struct private_data *priv = policy->driver_data;
+ int ret;
+ unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+
@ -47,17 +47,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+ if (!ret)
+ priv->opp_freq = target_freq;
+ mutex_unlock(&priv->lock);
- return dev_pm_opp_set_rate(priv->cpu_dev,
- policy->freq_table[index].frequency * 1000);
+ return ret;
}
/*
@@ -86,6 +96,39 @@ node_put:
return name;
return name;
}
+static int opp_notifier(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
@ -93,39 +93,39 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+
static int resources_available(void)
{
struct device *cpu_dev;
struct device *cpu_dev;
@@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p
bool fallback = false;
const char *name;
int ret;
bool fallback = false;
const char *name;
int ret;
+ struct srcu_notifier_head *opp_srcu_head;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
@@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p
goto out_free_opp;
}
goto out_free_opp;
}
+ mutex_init(&priv->lock);
+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
+
priv->reg_name = name;
priv->opp_table = opp_table;
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
priv->reg_name = name;
priv->opp_table = opp_table;
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_free_priv;
+ goto out_unregister_nb;
}
priv->cpu_dev = cpu_dev;
@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p
}
priv->cpu_dev = cpu_dev;
@@ -283,6 +330,8 @@ static int cpufreq_init(struct cpufreq_p
out_free_cpufreq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_unregister_nb:
+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
out_free_priv:
kfree(priv);
kfree(priv);
out_free_opp:

56
target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
View File

@ -12,15 +12,15 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol
struct private_data *priv = policy->driver_data;
int ret;
unsigned long target_freq = policy->freq_table[index].frequency * 1000;
struct private_data *priv = policy->driver_data;
int ret;
unsigned long target_freq = policy->freq_table[index].frequency * 1000;
+ struct clk *l2_clk = policy->l2_clk;
+ unsigned int l2_freq;
+ unsigned long new_l2_freq = 0;
mutex_lock(&priv->lock);
ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
mutex_lock(&priv->lock);
ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
- if (!ret)
+
+ if (!ret) {
@ -48,25 +48,25 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+ }
+ }
+
priv->opp_freq = target_freq;
priv->opp_freq = target_freq;
+ }
+
mutex_unlock(&priv->lock);
return ret;
mutex_unlock(&priv->lock);
return ret;
@@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p
const char *name;
int ret;
struct srcu_notifier_head *opp_srcu_head;
const char *name;
int ret;
struct srcu_notifier_head *opp_srcu_head;
+ struct device_node *l2_np;
+ struct clk *l2_clk = NULL;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
@@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p
policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
+ l2_clk = clk_get(cpu_dev, "l2");
+ if (!IS_ERR(l2_clk))
+ policy->l2_clk = l2_clk;
@ -74,17 +74,17 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
+ if (l2_np)
+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
+
ret = cpufreq_table_validate_and_show(policy, freq_table);
if (ret) {
dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
ret = cpufreq_table_validate_and_show(policy, freq_table);
if (ret) {
dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -73,6 +73,8 @@ struct cpufreq_policy {
unsigned int cpu; /* cpu managing this policy, must be online */
struct clk *clk;
unsigned int cpu; /* cpu managing this policy, must be online */
struct clk *clk;
+ struct clk *l2_clk; /* L2 clock */
+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */
struct cpufreq_cpuinfo cpuinfo;/* see above */
unsigned int min; /* in kHz */
struct cpufreq_cpuinfo cpuinfo;/* see above */
unsigned int min; /* in kHz */

16
target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch
View File

@ -11,13 +11,13 @@ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_
ret = PTR_ERR(cpu_reg);
goto out;
}
ret = PTR_ERR(cpu_reg);
goto out;
}
+ rcu_read_lock();
volt = dev_pm_opp_get_voltage(opp);
freq = dev_pm_opp_get_freq(opp);
volt = dev_pm_opp_get_voltage(opp);
freq = dev_pm_opp_get_freq(opp);
+ rcu_read_unlock();
mutex_lock(&priv->lock);
if (freq == priv->opp_freq) {
mutex_lock(&priv->lock);
if (freq == priv->opp_freq) {

6
target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
View File

@ -17,9 +17,9 @@ Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
depends on ARCH_MVEBU && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
depends on ARCH_MVEBU && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
+
+config ARM_QCOM_CPUIDLE
+ bool "CPU Idle Driver for QCOM processors"

16
target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
View File

@ -33,15 +33,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -341,7 +341,7 @@
depends on MMU
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
@@ -341,7 +341,7 @@ config ARCH_MULTIPLATFORM
depends on MMU
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ARCH_QCOM
select TIMER_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select TIMER_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -255,9 +255,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
@ -53,7 +53,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
MACHINE :=
endif
+endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
--- /dev/null

12
target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
View File

@ -11,13 +11,13 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/drivers/mtd/qcom_smem_part.c
+++ b/drivers/mtd/qcom_smem_part.c
@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
+ /* "rootfs" conflicts with OpenWrt auto mounting */
+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
+ m_part->name = "ubi";
+
/*
* The last SMEM partition may have its size marked as
* something like 0xffffffff, which means "until the end of the
/*
* The last SMEM partition may have its size marked as
* something like 0xffffffff, which means "until the end of the

12
target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
View File

@ -15,11 +15,11 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
.parent_map = gcc_pxo_pll8_map,
},
.clkr = {
.parent_map = gcc_pxo_pll8_map,
},
.clkr = {
+ .enable_reg = 0x2e80,
+ .enable_mask = BIT(11),
.hw.init = &(struct clk_init_data){
.name = "prng_src",
.parent_names = gcc_pxo_pll8,
.hw.init = &(struct clk_init_data){
.name = "prng_src",
.parent_names = gcc_pxo_pll8,

16
target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch
View File

@ -39,7 +39,7 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
- "qcom,msm8974-tsens" : For 8974 Family of SoCs
- "qcom,msm8996-tsens" : For 8996 Family of SoCs
+ - "qcom,ipq8064-tsens" : For IPQ8064
- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
--- a/drivers/thermal/qcom/Makefile
@ -606,22 +606,22 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
+ }, {
+ .compatible = "qcom,ipq8064-tsens",
+ .data = &data_ipq8064,
},
{}
},
{}
};
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
#endif /* __QCOM_TSENS_H__ */

312
target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch
View File

@ -26,84 +26,84 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
@@ -12,11 +12,15 @@ Required properties:
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
nvmem cells
+Optional properties:
+- interrupts: Interrupt which gets triggered when threshold is hit
+
Example:
tsens: thermal-sensor@900000 {
compatible = "qcom,msm8916-tsens";
reg = <0x4a8000 0x2000>;
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "caldata", "calsel";
compatible = "qcom,msm8916-tsens";
reg = <0x4a8000 0x2000>;
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "caldata", "calsel";
+ interrupts = <0 178 0>;
#thermal-sensor-cells = <1>;
};
#thermal-sensor-cells = <1>;
};
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (!data->ops->get_temp)
+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->get_temp(data->sensor_data, temp);
return -EINVAL;
return data->ops->get_temp(data->sensor_data, temp);
@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (!data->ops || !data->ops->set_trips)
+ if (!data->ops || !data->ops->set_trips
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->set_trips(data->sensor_data, low, high);
return -EINVAL;
return data->ops->set_trips(data->sensor_data, low, high);
@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
+ if (data->mode == THERMAL_DEVICE_DISABLED)
+ return -EINVAL;
+
return data->ops->set_emul_temp(data->sensor_data, temp);
return data->ops->set_emul_temp(data->sensor_data, temp);
}
@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (!data->ops->get_trend)
+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
return -EINVAL;
return data->ops->get_trend(data->sensor_data, trip, trend);
return -EINVAL;
return data->ops->get_trend(data->sensor_data, trip, trend);
@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
mutex_unlock(&tz->lock);
data->mode = mode;
mutex_unlock(&tz->lock);
data->mode = mode;
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+ if (mode == THERMAL_DEVICE_ENABLED)
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
return 0;
}
@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*type = data->trips[trip].type;
return -EDOM;
*type = data->trips[trip].type;
@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
return 0;
return 0;
}
+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
+ int trip, enum thermal_trip_activation_mode mode)
+{
@ -131,109 +131,109 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+}
+
static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
int *temp)
int *temp)
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*temp = data->trips[trip].temperature;
return -EDOM;
*temp = data->trips[trip].temperature;
@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
if (data->ops->set_trip_temp) {
return -EDOM;
if (data->ops->set_trip_temp) {
@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
*hyst = data->trips[trip].hysteresis;
return -EDOM;
*hyst = data->trips[trip].hysteresis;
@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
{
struct __thermal_zone *data = tz->devdata;
struct __thermal_zone *data = tz->devdata;
- if (trip >= data->ntrips || trip < 0)
+ if (trip >= data->ntrips || trip < 0
+ || (data->mode == THERMAL_DEVICE_DISABLED))
return -EDOM;
/* thermal framework should take care of data->mask & (1 << trip) */
return -EDOM;
/* thermal framework should take care of data->mask & (1 << trip) */
@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
if (ops->set_emul_temp)
tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
if (ops->set_emul_temp)
tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+ if (ops->set_trip_activate)
+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
+
mutex_unlock(&tzd->lock);
return tzd;
mutex_unlock(&tzd->lock);
return tzd;
@@ -726,7 +766,10 @@ static const char * const trip_types[] =
[THERMAL_TRIP_ACTIVE] = "active",
[THERMAL_TRIP_PASSIVE] = "passive",
[THERMAL_TRIP_HOT] = "hot",
[THERMAL_TRIP_ACTIVE] = "active",
[THERMAL_TRIP_PASSIVE] = "passive",
[THERMAL_TRIP_HOT] = "hot",
- [THERMAL_TRIP_CRITICAL] = "critical",
+ [THERMAL_TRIP_CRITICAL] = "critical_high",
+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
};
/**
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
{
- const struct tsens_sensor *s = p;
+ struct tsens_sensor *s = p;
struct tsens_device *tmdev = s->tmdev;
if (tmdev->ops->get_trend)
struct tsens_device *tmdev = s->tmdev;
if (tmdev->ops->get_trend)
@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
return -ENOTSUPP;
return -ENOTSUPP;
}
-static int __maybe_unused tsens_suspend(struct device *dev)
+static int __maybe_unused tsens_suspend(void *data)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_device *tmdev = s->tmdev;
if (tmdev->ops && tmdev->ops->suspend)
return tmdev->ops->suspend(tmdev);
if (tmdev->ops && tmdev->ops->suspend)
return tmdev->ops->suspend(tmdev);
@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend
return 0;
return 0;
}
-static int __maybe_unused tsens_resume(struct device *dev)
+static int __maybe_unused tsens_resume(void *data)
{
- struct tsens_device *tmdev = dev_get_drvdata(dev);
+ struct tsens_sensor *s = data;
+ struct tsens_device *tmdev = s->tmdev;
if (tmdev->ops && tmdev->ops->resume)
return tmdev->ops->resume(tmdev);
if (tmdev->ops && tmdev->ops->resume)
return tmdev->ops->resume(tmdev);
@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
return 0;
return 0;
}
+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
+{
+ struct tsens_sensor *s = data;
@ -259,50 +259,50 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+
+
static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
static const struct of_device_id tsens_table[] = {
@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
static const struct thermal_zone_of_device_ops tsens_of_ops = {
.get_temp = tsens_get_temp,
.get_trend = tsens_get_trend,
.get_temp = tsens_get_temp,
.get_trend = tsens_get_trend,
+ .set_trip_temp = tsens_set_trip_temp,
+ .set_trip_activate = tsens_activate_trip_type,
};
static int tsens_register(struct tsens_device *tmdev)
@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
if (id)
data = id->data;
else
if (id)
data = id->data;
else
- data = &data_8960;
+ return -EINVAL;
if (data->num_sensors <= 0) {
dev_err(dev, "invalid number of sensors\n");
if (data->num_sensors <= 0) {
dev_err(dev, "invalid number of sensors\n");
@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
tmdev->dev = dev;
tmdev->num_sensors = data->num_sensors;
tmdev->ops = data->ops;
tmdev->dev = dev;
tmdev->num_sensors = data->num_sensors;
tmdev->ops = data->ops;
+
+ tmdev->tsens_irq = platform_get_irq(pdev, 0);
+
for (i = 0; i < tmdev->num_sensors; i++) {
if (data->hw_ids)
tmdev->sensor[i].hw_id = data->hw_ids[i];
for (i = 0; i < tmdev->num_sensors; i++) {
if (data->hw_ids)
tmdev->sensor[i].hw_id = data->hw_ids[i];
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -24,9 +24,12 @@ struct tsens_device;
struct tsens_sensor {
struct tsens_device *tmdev;
struct thermal_zone_device *tzd;
struct tsens_device *tmdev;
struct thermal_zone_device *tzd;
+ struct work_struct notify_work;
int offset;
int id;
int hw_id;
int offset;
int id;
int hw_id;
+ int calib_data;
+ int calib_data_backup;
int slope;
u32 status;
int slope;
u32 status;
};
@@ -41,6 +44,9 @@ struct tsens_sensor {
* @suspend: Function to suspend the tsens device
@ -313,48 +313,48 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+ * @set_trip_activate: Function to activate trip points
*/
struct tsens_ops {
/* mandatory callbacks */
/* mandatory callbacks */
@@ -53,6 +59,9 @@ struct tsens_ops {
int (*suspend)(struct tsens_device *);
int (*resume)(struct tsens_device *);
int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
int (*suspend)(struct tsens_device *);
int (*resume)(struct tsens_device *);
int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+ int (*set_trip_temp)(void *, int, int);
+ int (*set_trip_activate)(void *, int,
+ enum thermal_trip_activation_mode);
};
/**
@@ -76,11 +85,13 @@ struct tsens_context {
struct tsens_device {
struct device *dev;
u32 num_sensors;
struct device *dev;
u32 num_sensors;
+ u32 tsens_irq;
struct regmap *map;
struct regmap_field *status_field;
struct tsens_context ctx;
bool trdy;
const struct tsens_ops *ops;
struct regmap *map;
struct regmap_field *status_field;
struct tsens_context ctx;
bool trdy;
const struct tsens_ops *ops;
+ struct work_struct tsens_work;
struct tsens_sensor sensor[0];
struct tsens_sensor sensor[0];
};
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -115,12 +115,48 @@
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
@@ -115,12 +115,48 @@ trip_point_type_show(struct device *dev,
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
+ case THERMAL_TRIP_CONFIGURABLE_HI:
+ return sprintf(buf, "configurable_hi\n");
+ case THERMAL_TRIP_CONFIGURABLE_LOW:
+ return sprintf(buf, "configurable_low\n");
+ case THERMAL_TRIP_CRITICAL_LOW:
+ return sprintf(buf, "critical_low\n");
default:
return sprintf(buf, "unknown\n");
}
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
+trip_point_type_activate(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
@ -387,52 +387,52 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+
+static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
const char *buf, size_t count)
{
@@ -562,6 +598,12 @@
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
@@ -562,6 +598,12 @@ static int create_trip_attrs(struct ther
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
+ tz->trip_type_attrs[indx].attr.store
+ = trip_point_type_activate;
+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
+ }
+
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -78,11 +78,19 @@ enum thermal_device_mode {
THERMAL_DEVICE_ENABLED,
THERMAL_DEVICE_ENABLED,
};
+enum thermal_trip_activation_mode {
+ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
+ THERMAL_TRIP_ACTIVATION_ENABLED,
+};
+
enum thermal_trip_type {
THERMAL_TRIP_ACTIVE = 0,
THERMAL_TRIP_PASSIVE,
THERMAL_TRIP_HOT,
THERMAL_TRIP_CRITICAL,
THERMAL_TRIP_ACTIVE = 0,
THERMAL_TRIP_PASSIVE,
THERMAL_TRIP_HOT,
THERMAL_TRIP_CRITICAL,
+ THERMAL_TRIP_CONFIGURABLE_HI,
+ THERMAL_TRIP_CONFIGURABLE_LOW,
+ THERMAL_TRIP_CRITICAL_LOW,
};
enum thermal_trend {
@@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
+ int (*set_trip_activate) (struct thermal_zone_device *, int,
+ enum thermal_trip_activation_mode);
int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
int (*get_crit_temp) (struct thermal_zone_device *, int *);
int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
int (*get_crit_temp) (struct thermal_zone_device *, int *);
@@ -363,6 +373,8 @@ struct thermal_genl_event {
* temperature.
* @set_trip_temp: a pointer to a function that sets the trip temperature on
@ -441,13 +441,13 @@ Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
+ * temperature interrupts
*/
struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
int (*get_temp)(void *, int *);
@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
int (*set_trips)(void *, int, int);
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
int (*set_trips)(void *, int, int);
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
+ int (*set_trip_activate)(void *, int,
+ enum thermal_trip_activation_mode);
};
/**

32
target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch
View File

@ -13,19 +13,19 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -13,6 +13,7 @@ Required properties :
"qcom,rpmcc-msm8916", "qcom,rpmcc"
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
"qcom,rpmcc-msm8916", "qcom,rpmcc"
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
- #clock-cells : shall contain 1
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
+/* ipq806x */
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
@ -37,12 +37,12 @@ Signed-off-by: John Crispin <john@phrozen.org>
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
+
static struct clk_rpm *apq8064_clks[] = {
[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
[RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
[RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
};
+static struct clk_rpm *ipq806x_clks[] = {
+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
@ -63,19 +63,19 @@ Signed-off-by: John Crispin <john@phrozen.org>
+};
+
static const struct rpm_clk_desc rpm_clk_apq8064 = {
.clks = apq8064_clks,
.num_clks = ARRAY_SIZE(apq8064_clks),
.clks = apq8064_clks,
.num_clks = ARRAY_SIZE(apq8064_clks),
};
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
+ .clks = ipq806x_clks,
+ .num_clks = ARRAY_SIZE(ipq806x_clks),
+};
+
static const struct of_device_id rpm_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
{ }
{ }
};
MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
--- a/include/dt-bindings/clock/qcom,rpmcc.h
@ -88,6 +88,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
+#define RPM_NSS_FABRIC_0_A_CLK 23
+#define RPM_NSS_FABRIC_1_CLK 24
+#define RPM_NSS_FABRIC_1_A_CLK 25
/* SMD RPM clocks */
#define RPM_SMD_XO_CLK_SRC 0

50
target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch
View File

@ -19,12 +19,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
#include "gpiolib.h"
@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip
gpiochip_remove_pin_ranges(chip);
of_node_put(chip->of_node);
gpiochip_remove_pin_ranges(chip);
of_node_put(chip->of_node);
}
+
+static struct of_device_id gpio_export_ids[] = {
@ -101,20 +101,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
{
struct gpio_chip *chip;
struct gpio_device *gdev;
struct gpio_chip *chip;
struct gpio_device *gdev;
@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
offset = gpio_chip_hwgpio(desc);
if (chip->names && chip->names[offset])
ioname = chip->names[offset];
offset = gpio_chip_hwgpio(desc);
if (chip->names && chip->names[offset])
ioname = chip->names[offset];
+ if (name)
+ ioname = name;
dev = device_create_with_groups(&gpio_class, &gdev->dev,
MKDEV(0, 0), data, gpio_groups,
dev = device_create_with_groups(&gpio_class, &gdev->dev,
MKDEV(0, 0), data, gpio_groups,
@@ -636,6 +638,12 @@ err_unlock:
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
+EXPORT_SYMBOL_GPL(__gpiod_export);
+
@ -123,14 +123,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ return __gpiod_export(desc, direction_may_change, NULL);
+}
EXPORT_SYMBOL_GPL(gpiod_export);
static int match_export(struct device *dev, const void *desc)
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
+{
@ -138,22 +138,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+
static inline int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
unsigned gpio)
{
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get
@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
struct gpio_desc *desc);
@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+static inline int _gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change,
+ const char *name)
@ -162,5 +162,5 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+
static inline int gpiod_export(struct gpio_desc *desc,
bool direction_may_change)
bool direction_may_change)
{

78
target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
View File

@ -23,9 +23,9 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
@ -38,12 +38,12 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+ sent by bootloader will be ignored.
+
endchoice
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -4,6 +4,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
@ -52,9 +52,9 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
#define do_extend_cmdline 0
#endif
@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
return cell_size;
return cell_size;
}
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
@ -110,11 +110,11 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
char cmdline[COMMAND_LINE_SIZE];
@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //save original bootloader args
@ -123,55 +123,55 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+
+#else
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
+#endif
}
*ptr = '\0';
}
*ptr = '\0';
@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ }
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
+#else
+
+ }
+#endif
return fdt_pack(fdt);
return fdt_pack(fdt);
}
--- a/init/main.c
+++ b/init/main.c
@@ -95,6 +95,10 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#include <linux/of.h>
+#endif
+
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //Show bootloader's original command line for reference
@ -184,6 +184,6 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com>
+ }
+#endif
+
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,

12
target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
View File

@ -11,9 +11,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq8064-ap148.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
+ qcom-ipq8064-db149.dtb \
@ -23,6 +23,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \

12
target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch
View File

@ -5,12 +5,12 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
cpumask_t mask;
bool use_scm_power_down = false;
cpumask_t mask;
bool use_scm_power_down = false;
+ if (!qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)

82
target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
View File

@ -11,19 +11,19 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -91,6 +91,8 @@
struct clk *iface_clk;
struct clk *core_clk;
struct clk *phy_clk;
@@ -91,6 +91,8 @@ struct qcom_pcie_resources_2_1_0 {
struct clk *iface_clk;
struct clk *core_clk;
struct clk *phy_clk;
+ struct clk *aux_clk;
+ struct clk *ref_clk;
struct reset_control *pci_reset;
struct reset_control *axi_reset;
struct reset_control *ahb_reset;
@@ -249,6 +251,14 @@
if (IS_ERR(res->phy_clk))
return PTR_ERR(res->phy_clk);
struct reset_control *pci_reset;
struct reset_control *axi_reset;
struct reset_control *ahb_reset;
@@ -249,6 +251,14 @@ static int qcom_pcie_get_resources_2_1_0
if (IS_ERR(res->phy_clk))
return PTR_ERR(res->phy_clk);
+ res->aux_clk = devm_clk_get(dev, "aux");
+ if (IS_ERR(res->aux_clk))
+ return PTR_ERR(res->aux_clk);
@ -32,37 +32,37 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+ if (IS_ERR(res->ref_clk))
+ return PTR_ERR(res->ref_clk);
+
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
if (IS_ERR(res->pci_reset))
return PTR_ERR(res->pci_reset);
@@ -281,6 +291,8 @@
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->phy_clk);
res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
if (IS_ERR(res->pci_reset))
return PTR_ERR(res->pci_reset);
@@ -281,6 +291,8 @@ static void qcom_pcie_deinit_2_1_0(struc
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
regulator_disable(res->vdda);
regulator_disable(res->vdda_phy);
regulator_disable(res->vdda_refclk);
@@ -324,16 +336,28 @@
goto err_assert_ahb;
}
regulator_disable(res->vdda);
regulator_disable(res->vdda_phy);
regulator_disable(res->vdda_refclk);
@@ -324,16 +336,28 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_assert_ahb;
}
+ ret = clk_prepare_enable(res->core_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable core clock\n");
+ goto err_clk_core;
+ }
+
ret = clk_prepare_enable(res->phy_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable phy clock\n");
goto err_clk_phy;
}
ret = clk_prepare_enable(res->phy_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable phy clock\n");
goto err_clk_phy;
}
- ret = clk_prepare_enable(res->core_clk);
+ ret = clk_prepare_enable(res->aux_clk);
if (ret) {
if (ret) {
- dev_err(dev, "cannot prepare/enable core clock\n");
- goto err_clk_core;
+ dev_err(dev, "cannot prepare/enable aux clock\n");
@ -73,12 +73,12 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable ref clock\n");
+ goto err_clk_ref;
}
ret = reset_control_deassert(res->ahb_reset);
@@ -389,10 +413,14 @@
return 0;
}
ret = reset_control_deassert(res->ahb_reset);
@@ -389,10 +413,14 @@ static int qcom_pcie_init_2_1_0(struct q
return 0;
err_deassert_ahb:
- clk_disable_unprepare(res->core_clk);
-err_clk_core:
@ -86,10 +86,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+err_clk_ref:
+ clk_disable_unprepare(res->aux_clk);
+err_clk_aux:
clk_disable_unprepare(res->phy_clk);
clk_disable_unprepare(res->phy_clk);
err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+err_clk_core:
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->iface_clk);
err_assert_ahb:
regulator_disable(res->vdda_phy);
regulator_disable(res->vdda_phy);

22
target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
View File

@ -11,7 +11,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -98,6 +98,7 @@
@@ -98,6 +98,7 @@ struct qcom_pcie_resources_2_1_0 {
struct reset_control *ahb_reset;
struct reset_control *por_reset;
struct reset_control *phy_reset;
@ -19,10 +19,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
struct regulator *vdda;
struct regulator *vdda_phy;
struct regulator *vdda_refclk;
@@ -275,6 +276,10 @@
@@ -275,6 +276,10 @@ static int qcom_pcie_get_resources_2_1_0
if (IS_ERR(res->por_reset))
return PTR_ERR(res->por_reset);
+ res->ext_reset = devm_reset_control_get(dev, "ext");
+ if (IS_ERR(res->ext_reset))
+ return PTR_ERR(res->ext_reset);
@ -30,7 +30,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
return PTR_ERR_OR_ZERO(res->phy_reset);
}
@@ -288,6 +293,7 @@
@@ -288,6 +293,7 @@ static void qcom_pcie_deinit_2_1_0(struc
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);
reset_control_assert(res->pci_reset);
@ -38,10 +38,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->phy_clk);
@@ -306,6 +312,12 @@
@@ -306,6 +312,12 @@ static int qcom_pcie_init_2_1_0(struct q
u32 val;
int ret;
+ ret = reset_control_assert(res->ahb_reset);
+ if (ret) {
+ dev_err(dev, "cannot assert ahb reset\n");
@ -51,10 +51,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
ret = regulator_enable(res->vdda);
if (ret) {
dev_err(dev, "cannot enable vdda regulator\n");
@@ -324,16 +336,16 @@
@@ -324,16 +336,16 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_vdda_phy;
}
- ret = reset_control_assert(res->ahb_reset);
+ ret = reset_control_deassert(res->ext_reset);
if (ret) {
@ -63,16 +63,16 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+ dev_err(dev, "cannot assert ext reset\n");
+ goto err_reset_ext;
}
ret = clk_prepare_enable(res->iface_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable iface clock\n");
- goto err_assert_ahb;
+ goto err_iface;
}
ret = clk_prepare_enable(res->core_clk);
@@ -422,7 +434,9 @@
@@ -422,7 +434,9 @@ err_clk_phy:
clk_disable_unprepare(res->core_clk);
err_clk_core:
clk_disable_unprepare(res->iface_clk);

30
target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -52,7 +52,13 @@
#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
#define PCIE20_PARF_PHY_CTRL 0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
@ -27,7 +27,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
@@ -83,6 +89,18 @@
#define DBI_RO_WR_EN 1
#define PERST_DELAY_US 1000
+/* PARF registers */
+#define PCIE20_PARF_PCS_DEEMPH 0x34
@ -41,21 +41,21 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+
+#define PCIE20_PARF_CONFIG_BITS 0x50
+#define PHY_RX0_EQ(x) (x << 24)
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
@@ -102,6 +120,7 @@
@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 {
struct regulator *vdda;
struct regulator *vdda_phy;
struct regulator *vdda_refclk;
+ uint8_t phy_tx0_term_offset;
};
struct qcom_pcie_resources_1_0_0 {
@@ -179,6 +198,16 @@
@@ -179,6 +198,16 @@ struct qcom_pcie {
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
+static inline void
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
+{
@ -69,10 +69,10 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
{
gpiod_set_value_cansleep(pcie->reset, 1);
@@ -280,6 +309,10 @@
@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0
if (IS_ERR(res->ext_reset))
return PTR_ERR(res->ext_reset);
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
+ &res->phy_tx0_term_offset))
+ res->phy_tx0_term_offset = 0;
@ -80,18 +80,18 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
return PTR_ERR_OR_ZERO(res->phy_reset);
}
@@ -309,7 +342,6 @@
@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- u32 val;
int ret;
ret = reset_control_assert(res->ahb_reset);
@@ -378,15 +410,26 @@
@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_deassert_ahb;
}
- /* enable PCIe clocks and resets */
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
- val &= ~BIT(0);
@ -121,6 +121,6 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+ /* Enable reference clock */
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
+ REF_USE_PAD, REF_SSP_EN);
ret = reset_control_deassert(res->phy_reset);
if (ret) {

24
target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
View File

@ -16,7 +16,7 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
@@ -83,6 +83,30 @@
#define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
#define PCIE_CAP_LINK1_VAL 0x2FD7F
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
+
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
@ -42,12 +42,12 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
+
#define PCIE20_PARF_Q2A_FLUSH 0x1AC
#define PCIE20_MISC_CONTROL_1_REG 0x8BC
@@ -251,6 +275,57 @@
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
}
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
+{
+ struct pcie_port *pp = &pcie->pci->pp;
@ -101,14 +101,14 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+
static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
@@ -465,6 +538,9 @@
writel(CFG_BRIDGE_SB_INIT,
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q
writel(CFG_BRIDGE_SB_INIT,
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
+
return 0;
return 0;
err_deassert_ahb:

58
target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch
View File

@ -14,48 +14,48 @@ Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
@@ -129,6 +129,8 @@
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
#define SLV_ADDR_SPACE_SZ 0x10000000
+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
+
struct qcom_pcie_resources_2_1_0 {
struct clk *iface_clk;
struct clk *core_clk;
@@ -218,6 +220,7 @@
struct phy *phy;
struct gpio_desc *reset;
struct qcom_pcie_ops *ops;
struct clk *iface_clk;
struct clk *core_clk;
@@ -218,6 +220,7 @@ struct qcom_pcie {
struct phy *phy;
struct gpio_desc *reset;
struct qcom_pcie_ops *ops;
+ uint32_t force_gen1;
};
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
@@ -532,6 +535,11 @@
/* wait for clock acquisition */
usleep_range(1000, 1500);
@@ -532,6 +535,11 @@ static int qcom_pcie_init_2_1_0(struct q
/* wait for clock acquisition */
usleep_range(1000, 1500);
+ if (pcie->force_gen1) {
+ writel_relaxed((readl_relaxed(
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
+ }
/* Set the Max TLP size to 2K, instead of using default of 4K */
@@ -1382,6 +1390,8 @@
struct dw_pcie *pci;
struct qcom_pcie *pcie;
int ret;
/* Set the Max TLP size to 2K, instead of using default of 4K */
@@ -1382,6 +1390,8 @@ static int qcom_pcie_probe(struct platfo
struct dw_pcie *pci;
struct qcom_pcie *pcie;
int ret;
+ uint32_t force_gen1 = 0;
+ struct device_node *np = pdev->dev.of_node;
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
@@ -1403,6 +1413,9 @@
if (IS_ERR(pcie->reset))
return PTR_ERR(pcie->reset);
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
if (!pcie)
@@ -1403,6 +1413,9 @@ static int qcom_pcie_probe(struct platfo
if (IS_ERR(pcie->reset))
return PTR_ERR(pcie->reset);
+ of_property_read_u32(np, "force_gen1", &force_gen1);
+ pcie->force_gen1 = force_gen1;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
pcie->parf = devm_ioremap_resource(dev, res);
if (IS_ERR(pcie->parf))
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
pcie->parf = devm_ioremap_resource(dev, res);
if (IS_ERR(pcie->parf))

18
target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
View File

@ -17,9 +17,9 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -131,6 +131,14 @@
#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
+#define PCIE20_DEV_CAS 0x78
@ -29,12 +29,12 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+#define PCIE20_MPS(x) __set(x, 7, 5)
+
struct qcom_pcie_resources_2_1_0 {
struct clk *iface_clk;
struct clk *core_clk;
@@ -1472,6 +1480,35 @@
return 0;
struct clk *iface_clk;
struct clk *core_clk;
@@ -1472,6 +1480,35 @@ static int qcom_pcie_probe(struct platfo
return 0;
}
+static void qcom_pcie_fixup_final(struct pci_dev *dev)
+{
+ int cap, err;
@ -65,5 +65,5 @@ Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
+
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },

62
target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
View File

@ -38,54 +38,54 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -407,6 +407,7 @@
@@ -407,6 +407,7 @@ static void qcom_pcie_deinit_2_1_0(struc
{
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
+ clk_disable_unprepare(res->phy_clk);
reset_control_assert(res->pci_reset);
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
@@ -415,7 +415,6 @@
reset_control_assert(res->ext_reset);
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
reset_control_assert(res->pci_reset);
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
@@ -415,7 +416,6 @@ static void qcom_pcie_deinit_2_1_0(struc
reset_control_assert(res->ext_reset);
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
clk_disable_unprepare(res->aux_clk);
clk_disable_unprepare(res->ref_clk);
regulator_disable(res->vdda);
@@ -472,12 +472,6 @@
goto err_clk_core;
}
clk_disable_unprepare(res->aux_clk);
clk_disable_unprepare(res->ref_clk);
regulator_disable(res->vdda);
@@ -472,12 +472,6 @@ static int qcom_pcie_init_2_1_0(struct q
goto err_clk_core;
}
- ret = clk_prepare_enable(res->phy_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_clk_phy;
- }
-
ret = clk_prepare_enable(res->aux_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable aux clock\n");
@@ -541,6 +535,12 @@
return ret;
}
ret = clk_prepare_enable(res->aux_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable aux clock\n");
@@ -541,6 +535,12 @@ static int qcom_pcie_init_2_1_0(struct q
return ret;
}
+ ret = clk_prepare_enable(res->phy_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable phy clock\n");
+ goto err_deassert_ahb;
+ }
+
/* wait for clock acquisition */
usleep_range(1000, 1500);
if (pcie->force_gen1) {
@@ -566,8 +566,6 @@
/* wait for clock acquisition */
usleep_range(1000, 1500);
if (pcie->force_gen1) {
@@ -566,8 +566,6 @@ err_deassert_ahb:
err_clk_ref:
clk_disable_unprepare(res->aux_clk);
clk_disable_unprepare(res->aux_clk);
err_clk_aux:
- clk_disable_unprepare(res->phy_clk);
-err_clk_phy:
clk_disable_unprepare(res->core_clk);
clk_disable_unprepare(res->core_clk);
err_clk_core:
clk_disable_unprepare(res->iface_clk);
clk_disable_unprepare(res->iface_clk);

14
target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
View File

@ -14,12 +14,12 @@ Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -408,7 +408,7 @@
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
clk_disable_unprepare(res->phy_clk);
@@ -408,7 +408,7 @@ static void qcom_pcie_deinit_2_1_0(struc
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
clk_disable_unprepare(res->phy_clk);
- reset_control_assert(res->pci_reset);
+ reset_control_assert(res->phy_reset);
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);
reset_control_assert(res->axi_reset);
reset_control_assert(res->ahb_reset);
reset_control_assert(res->por_reset);

14
target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch
View File

@ -1,12 +1,12 @@
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -422,6 +422,9 @@
{ .compatible = "qcom,scm-msm8996",
.data = NULL, /* no clocks */
},
@@ -422,6 +422,9 @@ static const struct of_device_id qcom_sc
{ .compatible = "qcom,scm-msm8996",
.data = NULL, /* no clocks */
},
+ { .compatible = "qcom,scm-ipq806x",
+ .data = NULL, /* no clocks */
+ },
{ .compatible = "qcom,scm",
.data = (void *)(SCM_HAS_CORE_CLK
| SCM_HAS_IFACE_CLK
{ .compatible = "qcom,scm",
.data = (void *)(SCM_HAS_CORE_CLK
| SCM_HAS_IFACE_CLK

54
target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
View File

@ -21,10 +21,10 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -561,6 +561,24 @@
return ret ? : le32_to_cpu(out);
@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi
return ret ? : le32_to_cpu(out);
}
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+ s32 ret;
@ -45,13 +45,13 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
+
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
struct {
struct {
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -366,6 +366,16 @@
return ret ? : res.a1;
@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi
return ret ? : res.a1;
}
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
+{
+ return -ENOTSUPP;
@ -64,11 +64,11 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
+
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
struct qcom_scm_desc desc = {0};
struct qcom_scm_desc desc = {0};
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
return platform_driver_register(&qcom_scm_driver);
return platform_driver_register(&qcom_scm_driver);
}
subsys_initcall(qcom_scm_init);
+
@ -89,7 +89,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese
extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
+#define SCM_IO_READ 1
+#define SCM_IO_WRITE 2
+#define SCM_SVC_IO_ACCESS 0x5
@ -112,23 +112,23 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
#include "../core.h"
#include "../pinconf.h"
#include "pinctrl-msm.h"
@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
@@ -638,6 +639,9 @@ static void msm_gpio_irq_ack(struct irq_
const struct msm_pingroup *g;
unsigned long flags;
u32 val;
+ u32 addr;
+ int ret;
+ const __be32 *reg;
g = &pctrl->soc->groups[d->hwirq];
g = &pctrl->soc->groups[d->hwirq];
@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
else
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
else
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
+ int ret = of_device_is_compatible(pctrl->dev->of_node,
+ "qcom,ipq8064-pinctrl");
/* Route interrupts to application cpu */
/* Route interrupts to application cpu */
- val = readl(pctrl->regs + g->intr_target_reg);
- val &= ~(7 << g->intr_target_bit);
- val |= g->intr_target_kpss_val << g->intr_target_bit;
@ -154,17 +154,17 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
+ pr_err("\n Routing interrupts to Apps proc failed");
+ }
+ }
/* Update configuration for gpio.
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
/* Update configuration for gpio.
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
return 0;
return 0;
}
EXPORT_SYMBOL(msm_pinctrl_remove);
-
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -43,6 +43,8 @@
@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
@ -173,7 +173,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
#else
static inline
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
@@ -73,5 +75,7 @@
@@ -73,5 +75,7 @@ qcom_scm_set_remote_state(u32 state,u32
static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }

38
target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
View File

@ -26,19 +26,19 @@ Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
@@ -33,6 +34,8 @@
struct device *dev;
struct clk **clks;
int num_clocks;
@@ -33,6 +34,8 @@ struct dwc3_of_simple {
struct device *dev;
struct clk **clks;
int num_clocks;
+ struct reset_control *mstr_rst_30_0;
+ struct reset_control *mstr_rst_30_1;
};
static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
@@ -102,6 +105,20 @@
if (ret)
return ret;
@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
if (ret)
return ret;
+ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
+
+ if (!IS_ERR(simple->mstr_rst_30_0))
@ -53,19 +53,19 @@ Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
+ else
+ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
+
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
for (i = 0; i < simple->num_clocks; i++) {
@@ -130,6 +147,12 @@
clk_put(simple->clks[i]);
}
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
for (i = 0; i < simple->num_clocks; i++) {
@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
clk_put(simple->clks[i]);
}
+ if (!IS_ERR(simple->mstr_rst_30_0))
+ reset_control_assert(simple->mstr_rst_30_0);
+
+ if (!IS_ERR(simple->mstr_rst_30_1))
+ reset_control_assert(simple->mstr_rst_30_1);
+
of_platform_depopulate(dev);
pm_runtime_put_sync(dev);
of_platform_depopulate(dev);
pm_runtime_put_sync(dev);

14
target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch
View File

@ -11,12 +11,12 @@ the ubi volume created by the other.
---
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1023,7 +1023,7 @@
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
@@ -1023,7 +1023,7 @@ static const struct flash_info spi_nor_i
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },

12
target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
View File

@ -7,20 +7,20 @@ Subject: BUS: add MSM_BUS
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
+obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
# Interconnect bus driver for OMAP SoCs.
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -93,6 +93,8 @@ config MVEBU_MBUS
Driver needed for the MBus configuration on Marvell EBU SoCs
(Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
Driver needed for the MBus configuration on Marvell EBU SoCs
(Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+source "drivers/bus/msm_bus/Kconfig"
+
config OMAP_INTERCONNECT
tristate "OMAP INTERCONNECT DRIVER"
depends on ARCH_OMAP2PLUS
tristate "OMAP INTERCONNECT DRIVER"
depends on ARCH_OMAP2PLUS
--- /dev/null
+++ b/include/dt-bindings/msm/msm-bus-ids.h
@@ -0,0 +1,869 @@

10
target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
View File

@ -10,9 +10,9 @@ Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -78,6 +78,13 @@ config QCOM_SMSM
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM
@ -21,8 +21,8 @@ Subject: SoC: add qualcomm syscon
+ functions for various peripherals.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,98 @@

4
target/linux/lantiq/patches-4.14/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch
View File

@ -18,7 +18,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
--- a/drivers/soc/lantiq/gphy.c
+++ b/drivers/soc/lantiq/gphy.c
@@ -56,6 +56,7 @@ static const struct xway_gphy_match_data
@@ -55,6 +55,7 @@ static const struct xway_gphy_match_data
};
static const struct of_device_id xway_gphy_match[] = {
@ -26,7 +26,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
{ .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
{ .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
{ .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
@@ -130,6 +131,16 @@ static int xway_gphy_of_probe(struct pla
@@ -111,6 +112,16 @@ static int xway_gphy_of_probe(struct pla
gphy_fw_name_cfg = of_device_get_match_data(dev);

86
target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch
View File

@ -1,86 +0,0 @@
From ae14aba7fc748b2da282b59a2f516a311ed1f6eb Mon Sep 17 00:00:00 2001
From: Mathias Kresin <dev@kresin.me>
Date: Tue, 27 Mar 2018 23:15:07 +0200
Subject: [PATCH] MIPS: lantiq: gphy: Remove reboot/remove reset asserts
While doing a global software reset, these bits are not cleared and let
some bootloader fail to initialise the GPHYs. The bootloader don't expect
these bits to be set, as they aren't during power on.
The asserts were a workaround for a wrong syscon-reboot mask. With a mask
set which includes the GPHY resets of the first reset register, the
resets of the second reset register arn't required any more.
Signed-off-by: Mathias Kresin <dev@kresin.me>
---
drivers/soc/lantiq/gphy.c | 34 ----------------------------------
1 file changed, 34 deletions(-)
--- a/drivers/soc/lantiq/gphy.c
+++ b/drivers/soc/lantiq/gphy.c
@@ -30,7 +30,6 @@ struct xway_gphy_priv {
struct clk *gphy_clk_gate;
struct reset_control *gphy_reset;
struct reset_control *gphy_reset2;
- struct notifier_block gphy_reboot_nb;
void __iomem *membase;
char *fw_name;
};
@@ -65,24 +64,6 @@ static const struct of_device_id xway_gp
};
MODULE_DEVICE_TABLE(of, xway_gphy_match);
-static struct xway_gphy_priv *to_xway_gphy_priv(struct notifier_block *nb)
-{
- return container_of(nb, struct xway_gphy_priv, gphy_reboot_nb);
-}
-
-static int xway_gphy_reboot_notify(struct notifier_block *reboot_nb,
- unsigned long code, void *unused)
-{
- struct xway_gphy_priv *priv = to_xway_gphy_priv(reboot_nb);
-
- if (priv) {
- reset_control_assert(priv->gphy_reset);
- reset_control_assert(priv->gphy_reset2);
- }
-
- return NOTIFY_DONE;
-}
-
static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
dma_addr_t *dev_addr)
{
@@ -216,14 +197,6 @@ static int xway_gphy_probe(struct platfo
reset_control_deassert(priv->gphy_reset);
reset_control_deassert(priv->gphy_reset2);
- /* assert the gphy reset because it can hang after a reboot: */
- priv->gphy_reboot_nb.notifier_call = xway_gphy_reboot_notify;
- priv->gphy_reboot_nb.priority = -1;
-
- ret = register_reboot_notifier(&priv->gphy_reboot_nb);
- if (ret)
- dev_warn(dev, "Failed to register reboot notifier\n");
-
platform_set_drvdata(pdev, priv);
return ret;
@@ -235,17 +208,10 @@ static int xway_gphy_remove(struct platf
struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
int ret;
- reset_control_assert(priv->gphy_reset);
- reset_control_assert(priv->gphy_reset2);
-
iowrite32be(0, priv->membase);
clk_disable_unprepare(priv->gphy_clk_gate);
- ret = unregister_reboot_notifier(&priv->gphy_reboot_nb);
- if (ret)
- dev_warn(dev, "Failed to unregister reboot notifier\n");
-
return 0;
}

4
target/linux/mediatek/patches-4.14/0045-net-dsa-mediatek-turn-into-platform-driver.patch
View File

@ -57,9 +57,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
}
static const struct of_device_id mt7530_of_match[] = {
@@ -1135,16 +1142,16 @@ static const struct of_device_id mt7530_
{ /* sentinel */ },
@@ -1136,16 +1143,16 @@ static const struct of_device_id mt7530_
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);
-static struct mdio_driver mt7530_mdio_driver = {
+static struct platform_driver mtk_mt7530_driver = {

16
target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
View File

@ -28,7 +28,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1948,6 +1948,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
@ -48,7 +48,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -3,6 +3,8 @@
@@ -4,6 +4,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
@ -57,7 +57,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
#else
#define do_extend_cmdline 0
#endif
@@ -66,6 +68,65 @@ static uint32_t get_cell_size(const void
@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void
return cell_size;
}
@ -123,7 +123,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
@ -145,7 +145,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
}
*ptr = '\0';
@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
@ -156,7 +156,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
@ -169,7 +169,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
}
--- a/init/main.c
+++ b/init/main.c
@@ -89,6 +89,10 @@
@@ -95,6 +95,10 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
@ -180,7 +180,7 @@ Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -540,6 +544,18 @@ asmlinkage __visible void __init start_k
@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);

4
target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch
View File

@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3961,6 +3961,15 @@ static int mvneta_ethtool_set_wol(struct
@@ -3962,6 +3962,15 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
@ -25,7 +25,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
@@ -3971,6 +3980,7 @@ static const struct net_device_ops mvnet
@@ -3972,6 +3981,7 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,

52
target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch
View File

@ -132,7 +132,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
@@ -1214,10 +1233,6 @@ static void mvneta_port_disable(struct m
@@ -1215,10 +1234,6 @@ static void mvneta_port_disable(struct m
val &= ~MVNETA_GMAC0_PORT_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
@ -143,7 +143,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
udelay(200);
}
@@ -1277,44 +1292,6 @@ static void mvneta_set_other_mcast_table
@@ -1278,44 +1293,6 @@ static void mvneta_set_other_mcast_table
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
@ -188,7 +188,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
static void mvneta_percpu_unmask_interrupt(void *arg)
{
struct mvneta_port *pp = arg;
@@ -1467,7 +1444,6 @@ static void mvneta_defaults_set(struct m
@@ -1468,7 +1445,6 @@ static void mvneta_defaults_set(struct m
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
@ -196,7 +196,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
@@ -2692,26 +2668,11 @@ static irqreturn_t mvneta_percpu_isr(int
@@ -2693,26 +2669,11 @@ static irqreturn_t mvneta_percpu_isr(int
return IRQ_HANDLED;
}
@ -225,7 +225,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
/* NAPI handler
@@ -2727,7 +2688,6 @@ static int mvneta_poll(struct napi_struc
@@ -2728,7 +2689,6 @@ static int mvneta_poll(struct napi_struc
u32 cause_rx_tx;
int rx_queue;
struct mvneta_port *pp = netdev_priv(napi->dev);
@ -233,7 +233,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
if (!netif_running(pp->dev)) {
@@ -2741,12 +2701,11 @@ static int mvneta_poll(struct napi_struc
@@ -2742,12 +2702,11 @@ static int mvneta_poll(struct napi_struc
u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
@ -251,7 +251,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
/* Release Tx descriptors */
@@ -3060,7 +3019,6 @@ static int mvneta_setup_txqs(struct mvne
@@ -3061,7 +3020,6 @@ static int mvneta_setup_txqs(struct mvne
static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
@ -259,7 +259,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
@@ -3088,16 +3046,15 @@ static void mvneta_start_dev(struct mvne
@@ -3089,16 +3047,15 @@ static void mvneta_start_dev(struct mvne
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
@ -278,7 +278,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
if (!pp->neta_armada3700) {
for_each_online_cpu(cpu) {
@@ -3251,103 +3208,232 @@ static int mvneta_set_mac_addr(struct ne
@@ -3252,103 +3209,232 @@ static int mvneta_set_mac_addr(struct ne
return 0;
}
@ -585,7 +585,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
/* Electing a CPU must be done in an atomic way: it should be done
@@ -3626,10 +3712,9 @@ static int mvneta_stop(struct net_device
@@ -3627,10 +3713,9 @@ static int mvneta_stop(struct net_device
static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
@ -598,7 +598,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
/* Ethtool methods */
@@ -3640,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct
@@ -3641,44 +3726,25 @@ mvneta_ethtool_set_link_ksettings(struct
const struct ethtool_link_ksettings *cmd)
{
struct mvneta_port *pp = netdev_priv(ndev);
@ -657,7 +657,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
/* Set interrupt coalescing for ethtools */
@@ -3769,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam(
@@ -3770,6 +3836,22 @@ static int mvneta_ethtool_set_ringparam(
return 0;
}
@ -680,7 +680,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
u8 *data)
{
@@ -3785,26 +3867,35 @@ static void mvneta_ethtool_update_stats(
@@ -3786,26 +3868,35 @@ static void mvneta_ethtool_update_stats(
{
const struct mvneta_statistic *s;
void __iomem *base = pp->base;
@ -721,7 +721,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
}
@@ -3939,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struc
@@ -3940,28 +4031,65 @@ static int mvneta_ethtool_get_rxfh(struc
static void mvneta_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
@ -795,7 +795,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv,
select_queue_fallback_t fallback)
@@ -3984,13 +4112,15 @@ static const struct net_device_ops mvnet
@@ -3985,13 +4113,15 @@ static const struct net_device_ops mvnet
};
static const struct ethtool_ops mvneta_eth_tool_ops = {
@ -812,7 +812,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,
@@ -3998,10 +4128,12 @@ static const struct ethtool_ops mvneta_e
@@ -3999,10 +4129,12 @@ static const struct ethtool_ops mvneta_e
.get_rxnfc = mvneta_ethtool_get_rxnfc,
.get_rxfh = mvneta_ethtool_get_rxfh,
.set_rxfh = mvneta_ethtool_set_rxfh,
@ -826,7 +826,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
};
/* Initialize hw */
@@ -4146,14 +4278,13 @@ static int mvneta_probe(struct platform_
@@ -4147,14 +4279,13 @@ static int mvneta_probe(struct platform_
{
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
@ -842,7 +842,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
int tx_csum_limit;
int phy_mode;
int err;
@@ -4169,31 +4300,11 @@ static int mvneta_probe(struct platform_
@@ -4170,31 +4301,11 @@ static int mvneta_probe(struct platform_
goto err_free_netdev;
}
@ -875,7 +875,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
dev->tx_queue_len = MVNETA_MAX_TXD;
@@ -4204,12 +4315,7 @@ static int mvneta_probe(struct platform_
@@ -4205,12 +4316,7 @@ static int mvneta_probe(struct platform_
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
@ -889,7 +889,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
pp->rxq_def = rxq_def;
@@ -4231,7 +4337,7 @@ static int mvneta_probe(struct platform_
@@ -4232,7 +4338,7 @@ static int mvneta_probe(struct platform_
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);
@ -898,7 +898,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
clk_prepare_enable(pp->clk);
@@ -4357,6 +4463,14 @@ static int mvneta_probe(struct platform_
@@ -4358,6 +4464,14 @@ static int mvneta_probe(struct platform_
/* 9676 == 9700 - 20 and rounding to 8 */
dev->max_mtu = 9676;
@ -913,7 +913,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register\n");
@@ -4368,14 +4482,6 @@ static int mvneta_probe(struct platform_
@@ -4369,14 +4483,6 @@ static int mvneta_probe(struct platform_
platform_set_drvdata(pdev, pp->dev);
@ -928,7 +928,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
return 0;
err_netdev:
@@ -4386,16 +4492,14 @@ err_netdev:
@@ -4387,16 +4493,14 @@ err_netdev:
1 << pp->id);
}
err_free_stats:
@ -947,7 +947,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
err_free_irq:
irq_dispose_mapping(dev->irq);
err_free_netdev:
@@ -4407,7 +4511,6 @@ err_free_netdev:
@@ -4408,7 +4512,6 @@ err_free_netdev:
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
@ -955,7 +955,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
@@ -4415,10 +4518,8 @@ static int mvneta_remove(struct platform
@@ -4416,10 +4519,8 @@ static int mvneta_remove(struct platform
clk_disable_unprepare(pp->clk);
free_percpu(pp->ports);
free_percpu(pp->stats);
@ -967,7 +967,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
free_netdev(dev);
if (pp->bm_priv) {
@@ -4470,9 +4571,6 @@ static int mvneta_resume(struct device *
@@ -4471,9 +4572,6 @@ static int mvneta_resume(struct device *
return err;
}

2
target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch
View File

@ -18,7 +18,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
struct device_node *dn;
unsigned int tx_csum_limit;
struct phylink *phylink;
@@ -4315,6 +4316,7 @@ static int mvneta_probe(struct platform_
@@ -4316,6 +4317,7 @@ static int mvneta_probe(struct platform_
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);

8
target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
View File

@ -14,7 +14,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2704,8 +2704,7 @@ static int mvneta_poll(struct napi_struc
@@ -2705,8 +2705,7 @@ static int mvneta_poll(struct napi_struc
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
@ -24,7 +24,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
mvneta_link_change(pp);
}
@@ -3044,8 +3043,7 @@ static void mvneta_start_dev(struct mvne
@@ -3045,8 +3044,7 @@ static void mvneta_start_dev(struct mvne
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
@ -34,7 +34,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
phylink_start(pp->phylink);
netif_tx_start_all_queues(pp->dev);
@@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned in
@@ -3543,8 +3541,7 @@ static int mvneta_cpu_online(unsigned in
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
@ -44,7 +44,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
netif_tx_start_all_queues(pp->dev);
spin_unlock(&pp->lock);
return 0;
@@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int
@@ -3585,8 +3582,7 @@ static int mvneta_cpu_dead(unsigned int
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |

4
target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct
@@ -4046,6 +4046,22 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
@ -33,7 +33,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
@@ -4129,6 +4145,8 @@ static const struct ethtool_ops mvneta_e
@@ -4130,6 +4146,8 @@ static const struct ethtool_ops mvneta_e
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,

4
target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct
@@ -4046,22 +4046,6 @@ static int mvneta_ethtool_set_wol(struct
return ret;
}
@ -38,7 +38,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
@@ -4145,8 +4129,6 @@ static const struct ethtool_ops mvneta_e
@@ -4146,8 +4130,6 @@ static const struct ethtool_ops mvneta_e
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,

2
target/linux/ramips/patches-4.14/0032-USB-dwc2-add-device_reset.patch
View File

@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
@@ -5075,6 +5076,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
@@ -5105,6 +5106,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
retval = -ENOMEM;