mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-20 07:38:28 +02:00
ramips: add support for Netgear WAX202
Netgear WAX202 is an 802.11ax (Wi-Fi 6) router. Specifications: * SoC: MT7621A * RAM: 512 MiB NT5CC256M16ER-EK * Flash: NAND 128 MiB F59L1G81MB-25T * Wi-Fi: * MT7915D: 2.4/5 GHz (DBDC) * Ethernet: 4x 1GbE * Switch: SoC built-in * USB: None * UART: 115200 baud (labeled on board) Load addresses (same as ipTIME AX2004M): * stock * 0x80010000: FIT image * 0x81001000: kernel image -> entry * OpenWrt * 0x80010000: FIT image * 0x82000000: uncompressed kernel+relocate image * 0x80001000: relocated kernel image -> entry Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * Note that the bootloader accepts both encrypted and unencrypted images, while the stock web interface only accepts encrypted ones. Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References in WAX202 GPL source: https://www.downloads.netgear.com/files/GPL/WAX202_V1.0.5.1_Source.rar * openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax202.dts DTS file for this device. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
This commit is contained in:
Wenli Looi
Christian Marangi
parent
efca76ffce
commit
0f068e7c4a
277
target/linux/ramips/dts/mt7621_netgear_wax202.dts
Normal file
277
target/linux/ramips/dts/mt7621_netgear_wax202.dts
Normal file
|
|
@ -0,0 +1,277 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "netgear,wax202", "mediatek,mt7621-soc";
|
||||
model = "Netgear WAX202";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_orange;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_orange;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "orange:power";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_net_green: net_green {
|
||||
label = "green:net";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_net_blue: net_blue {
|
||||
label = "blue:net";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan1_green: lan1_green {
|
||||
label = "green:lan1";
|
||||
gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan1_orange: lan1_orange {
|
||||
label = "orange:lan1";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan2_green: lan2_green {
|
||||
label = "green:lan2";
|
||||
gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan2_orange: lan2_orange {
|
||||
label = "orange:lan2";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan3_green: lan3_green {
|
||||
label = "green:lan3";
|
||||
gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_lan3_orange: lan3_orange {
|
||||
label = "orange:lan3";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wifi2g_green: wifi2g_green {
|
||||
label = "green:wifi2g";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
led_wifi2g_blue: wifi2g_blue {
|
||||
label = "blue:wifi2g";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wifi5g_green: wifi5g_green {
|
||||
label = "green:wifi5g";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
led_wifi5g_blue: wifi5g_blue {
|
||||
label = "blue:wifi5g";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "Config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "Factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
reg = <0x180000 0x2600000>;
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
reg = <0x0 0x400000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "ubi";
|
||||
reg = <0x400000 0x2200000>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@2780000 {
|
||||
label = "firmware_backup";
|
||||
reg = <0x2780000 0x2600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4d80000 {
|
||||
label = "CFG";
|
||||
reg = <0x4d80000 0x800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5580000 {
|
||||
label = "RAE";
|
||||
reg = <0x5580000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5980000 {
|
||||
label = "POT";
|
||||
reg = <0x5980000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5a80000 {
|
||||
label = "Language";
|
||||
reg = <0x5a80000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5e80000 {
|
||||
label = "Traffic";
|
||||
reg = <0x5e80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6080000 {
|
||||
label = "Cert";
|
||||
reg = <0x6080000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6180000 {
|
||||
label = "NTGRcryptK";
|
||||
reg = <0x6180000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6280000 {
|
||||
label = "NTGRcryptD";
|
||||
reg = <0x6280000 0x500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6780000 {
|
||||
label = "LOG";
|
||||
reg = <0x6780000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6880000 {
|
||||
label = "User_data";
|
||||
reg = <0x6880000 0x640000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "uart3", "uart2", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
/* port@3 is not used */
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -1427,6 +1427,29 @@ define Device/netgear_wac124
|
|||
endef
|
||||
TARGET_DEVICES += netgear_wac124
|
||||
|
||||
define Device/netgear_wax202
|
||||
$(Device/dsa-migration)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := WAX202
|
||||
DEVICE_PACKAGES := kmod-mt7915e
|
||||
NETGEAR_ENC_MODEL := WAX202
|
||||
NETGEAR_ENC_REGION := US
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGE_SIZE := 38912k
|
||||
KERNEL_SIZE := 4096k
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
|
||||
append-squashfs4-fakeroot
|
||||
IMAGES += factory.img
|
||||
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
|
||||
append-ubi | check-size | netgear-encrypted-factory
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += netgear_wax202
|
||||
|
||||
define Device/netgear_wndr3700-v5
|
||||
$(Device/dsa-migration)
|
||||
$(Device/netgear_sercomm_nor)
|
||||
|
|
|
|||
|
|
@ -116,6 +116,12 @@ netgear,r7450)
|
|||
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
|
||||
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
|
||||
;;
|
||||
netgear,wax202)
|
||||
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
|
||||
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
|
||||
ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
|
||||
;;
|
||||
oraybox,x3a)
|
||||
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
|
||||
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ ramips_setup_interfaces()
|
|||
ampedwireless,ally-r1900k|\
|
||||
gehua,ghl-r-001|\
|
||||
hiwifi,hc5962|\
|
||||
netgear,wax202|\
|
||||
xiaomi,mi-router-3-pro|\
|
||||
xiaomi,mi-router-ac2100|\
|
||||
xiaomi,mi-router-cr6606|\
|
||||
|
|
@ -197,6 +198,11 @@ ramips_setup_macs()
|
|||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add $label_mac 1)
|
||||
;;
|
||||
netgear,wax202)
|
||||
lan_mac=$(mtd_get_mac_ascii Config mac)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
raisecom,msg1500-x-00)
|
||||
lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
|
||||
wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)
|
||||
|
|
|
|||
|
|
@ -76,6 +76,11 @@ case "$board" in
|
|||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
netgear,wax202)
|
||||
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
oraybox,x3a)
|
||||
if [ "$PHYNBR" = "1" ]; then
|
||||
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
|
||||
|
|
|
|||
|
|
@ -84,6 +84,7 @@ platform_do_upgrade() {
|
|||
netgear,r7450|\
|
||||
netgear,wac104|\
|
||||
netgear,wac124|\
|
||||
netgear,wax202|\
|
||||
netis,wf2881|\
|
||||
raisecom,msg1500-x-00|\
|
||||
sercomm,na502|\
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user