ramips: add support for ELECOM WRC-1167FS
ELECOM WRC-1167FS is a 2.4/5 GHz band 11ac (WiFi-5) router, based on MT7628AN. Specification: - SoC : MediaTek MT7628AN - RAM : DDR2 64 MiB (NT5TU32M16FG-AC) - Flash : SPI-NOR 16 MiB (W25Q128JVSIQ) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : MediaTek MT7628AN (SoC) - 5 GHz : MediaTek MT7612E - Ethernet : 10/100 Mbps x2 - Switch : MT7628AN (SoC) - LEDs/Keys : 6x, 3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: 3.3V, GND, TX, RX from "J1" marking - 57600n8 - Power : 12 VDC, 1 A Flash instruction using factory image: 1. Boot WRC-1167FS normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button to perform firmware update 4. Wait ~120 seconds to complete flashing Notes: - Last 0x800000 (8 MiB) in SPI-NOR flash is not used on stock firmware - Additional padding in factory image is required to avoid incomplete flashing on stock firmware MAC addresses: - LAN : BC:5C:4C:xx:xx:68 (Config, ethaddr (text) / Factory, 0x28 (hex)) - WAN : BC:5C:4C:xx:xx:69 (Config, wanaddr (text) / Factory, 0x22 (hex)) - 2.4GHz: BC:5C:4C:xx:xx:6A (Config, rmac (text) / Factory, 0x4 (hex)) - 5GHz : BC:5C:4C:xx:xx:6B (Config, rmac2 (text) / Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
INAGAKI Hiroshi
parent
e95b1b23f1
commit
08768b44d9
|
|
@ -0,0 +1,164 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-1167fs", "mediatek,mt7628an-soc";
|
||||
model = "ELECOM WRC-1167FS";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "red:wps";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
internet {
|
||||
label = "green:internet";
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "green:lan";
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x730000>;
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
label = "storage";
|
||||
reg = <0x780000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
mediatek,portdisable = <0x27>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "wled_an", "p3led_an", "p4led_an", "wdt", "refclk", "i2c", "i2s";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -6,6 +6,21 @@ include ./common-tp-link.mk
|
|||
|
||||
DEFAULT_SOC := mt7628an
|
||||
|
||||
define Build/elecom-header
|
||||
$(eval model_id=$(1))
|
||||
( \
|
||||
fw_size="$$(printf '%08x' $$(stat -c%s $@))"; \
|
||||
echo -ne "$$(echo "031d6129$${fw_size}06000000$(model_id)" | \
|
||||
sed 's/../\\x&/g')"; \
|
||||
dd if=/dev/zero bs=92 count=1; \
|
||||
data_crc="$$(dd if=$@ | gzip -c | tail -c 8 | \
|
||||
od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
||||
echo -ne "$$(echo "$${data_crc}00000000" | sed 's/../\\x&/g')"; \
|
||||
dd if=$@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/ravpower-wd009-factory
|
||||
mkimage -A mips -T standalone -C none -a 0x80010000 -e 0x80010000 \
|
||||
-n "OpenWrt Bootloader" -d $(UBOOT_PATH) $@.new
|
||||
|
|
@ -93,6 +108,18 @@ define Device/duzun_dm06
|
|||
endef
|
||||
TARGET_DEVICES += duzun_dm06
|
||||
|
||||
define Device/elecom_wrc-1167fs
|
||||
IMAGE_SIZE := 7360k
|
||||
DEVICE_VENDOR := ELECOM
|
||||
DEVICE_MODEL := WRC-1167FS
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size | \
|
||||
xor-image -p 29944A25 -x | elecom-header 00228000 | \
|
||||
elecom-product-header WRC-1167FS
|
||||
DEVICE_PACKAGES := kmod-mt76x2
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-1167fs
|
||||
|
||||
define Device/glinet_gl-mt300n-v2
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
|
|
|
|||
|
|
@ -25,6 +25,10 @@ cudy,wr1000)
|
|||
ucidef_set_led_switch "lan1" "lan1" "blue:lan1" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan2" "lan2" "blue:lan2" "switch0" "0x04"
|
||||
;;
|
||||
elecom,wrc-1167fs)
|
||||
ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x8"
|
||||
ucidef_set_led_switch "internet" "internet" "green:internet" "switch0" "0x10"
|
||||
;;
|
||||
glinet,gl-mt300n-v2)
|
||||
ucidef_set_led_netdev "wifi_led" "wifi" "red:wlan" "wlan0"
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x1"
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@ ramips_setup_interfaces()
|
|||
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
|
||||
;;
|
||||
buffalo,wcr-1166ds|\
|
||||
elecom,wrc-1167fs|\
|
||||
wavlink,wl-wn577a2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"3:lan" "4:wan" "6@eth0"
|
||||
|
|
@ -181,6 +182,10 @@ ramips_setup_macs()
|
|||
zyxel,keenetic-extra-ii)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
|
||||
;;
|
||||
elecom,wrc-1167fs)
|
||||
wan_mac=$(mtd_get_mac_binary factory 0x22)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
hilink,hlk-7628n)
|
||||
lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
|
|
|
|||
Loading…
Reference in New Issue