mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-06-16 20:23:53 +02:00
Code Releases Activity
c642a97aa6
openwrt/target/linux/sunxi/image/cortex-a7.mk

253 lines
6.5 KiB
Makefile
Raw Normal View History

sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
#
sunxi: add support for Sinovoip Banana Pi M2 Plus CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E) Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG Untested: Audio, Video Not working: Bluetooth Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-02-15 16:08:53 +01:00
# Copyright (C) 2013-2019 OpenWrt.org
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
# Copyright (C) 2016 Yousong Zhou
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
ifeq ($(SUBTARGET),cortexa7)
define Device/sun7i-a20-olinuxino-lime
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi
SUPPORTED_DEVICES:=olimex,a20-olinuxino-lime
SUNXI_DTS:=sun7i-a20-olinuxino-lime
endef
TARGET_DEVICES += sun7i-a20-olinuxino-lime
sunxi: add Olimex A20-OlinuXino-LIME2 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-05-19 03:14:08 +02:00
define Device/sun7i-a20-olinuxino-lime2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME2
sunxi: add Olimex A20-OlinuXino-LIME2 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-05-19 03:14:08 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
SUPPORTED_DEVICES:=olimex,a20-olinuxino-lime2
SUNXI_DTS:=sun7i-a20-olinuxino-lime2
endef
TARGET_DEVICES += sun7i-a20-olinuxino-lime2
sunxi: add Olimex A20-OLinuXino-LIME2-eMMC Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-19 00:13:44 +02:00
define Device/sun7i-a20-olinuxino-lime2-emmc
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-LIME2
DEVICE_VARIANT := eMMC
sunxi: add Olimex A20-OLinuXino-LIME2-eMMC Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-19 00:13:44 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
SUPPORTED_DEVICES:=olimex,a20-olinuxino-lime2-emmc
SUNXI_DTS:=sun7i-a20-olinuxino-lime2-emmc
endef
TARGET_DEVICES += sun7i-a20-olinuxino-lime2-emmc
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
define Device/sun7i-a20-olinuxino-micro
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A20-OLinuXino-MICRO
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
SUPPORTED_DEVICES:=olimex,a20-olinuxino-micro
SUNXI_DTS:=sun7i-a20-olinuxino-micro
endef
TARGET_DEVICES += sun7i-a20-olinuxino-micro
define Device/sun7i-a20-bananapi
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pi
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-core kmod-ata-sunxi
SUPPORTED_DEVICES:=lemaker,bananapi
SUNXI_DTS:=sun7i-a20-bananapi
endef
TARGET_DEVICES += sun7i-a20-bananapi
define Device/sun7i-a20-bananapro
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pro
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-core kmod-ata-sunxi kmod-brcmfmac
SUPPORTED_DEVICES:=lemaker,bananapro
SUNXI_DTS:=sun7i-a20-bananapro
endef
TARGET_DEVICES += sun7i-a20-bananapro
define Device/sun7i-a20-cubieboard2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Cubietech
DEVICE_MODEL := Cubieboard2
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
SUPPORTED_DEVICES:=cubietech,cubieboard2
SUNXI_DTS:=sun7i-a20-cubieboard2
endef
TARGET_DEVICES += sun7i-a20-cubieboard2
define Device/sun7i-a20-cubietruck
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Cubietech
DEVICE_MODEL := Cubietruck
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi kmod-brcmfmac
SUPPORTED_DEVICES:=cubietech,cubietruck
SUNXI_DTS:=sun7i-a20-cubietruck
endef
TARGET_DEVICES += sun7i-a20-cubietruck
define Device/sun7i-a20-lamobo-r1
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Lamobo
DEVICE_MODEL := Lamobo R1
treewide: use wpad-basic for not small flash targets Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-10 19:22:41 +02:00
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtl8192cu swconfig wpad-basic
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
SUPPORTED_DEVICES:=lamobo,lamobo-r1
SUNXI_DTS:=sun7i-a20-lamobo-r1
endef
TARGET_DEVICES += sun7i-a20-lamobo-r1
define Device/sun6i-a31-m9
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Mele
DEVICE_MODEL := M9
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtc-sunxi kmod-rtl8192cu
SUPPORTED_DEVICES:=mele,m9
SUNXI_DTS:=sun6i-a31-m9
endef
TARGET_DEVICES += sun6i-a31-m9
sunxi: add support for Orange Pi Zero Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
2018-09-30 16:42:03 +02:00
define Device/sun8i-h2-plus-orangepi-zero
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi Zero
sunxi: add support for Orange Pi Zero Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
2018-09-30 16:42:03 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi
SUPPORTED_DEVICES:=xunlong,orangepi-zero
SUNXI_DTS:=sun8i-h2-plus-orangepi-zero
endef
TARGET_DEVICES += sun8i-h2-plus-orangepi-zero
sunxi: add Orange Pi R1 support The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-26 22:41:56 +02:00
define Device/sun8i-h2-plus-orangepi-r1
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1
sunxi: add Orange Pi R1 support The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-26 22:41:56 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-usb-net kmod-usb-net-rtl8152
SUPPORTED_DEVICES:=xunlong,orangepi-r1
SUNXI_DTS:=sun8i-h2-plus-orangepi-r1
endef
TARGET_DEVICES += sun8i-h2-plus-orangepi-r1
sunxi: add support for Sinovoip Banana Pi M2 Plus CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E) Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG Untested: Audio, Video Not working: Bluetooth Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-02-15 16:08:53 +01:00
define Device/sun8i-h3-bananapi-m2-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Banana Pi M2+
sunxi: add support for Sinovoip Banana Pi M2 Plus CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E) Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG Untested: Audio, Video Not working: Bluetooth Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-02-15 16:08:53 +01:00
DEVICE_PACKAGES:=kmod-rtc-sunxi \
kmod-leds-gpio kmod-ledtrig-heartbeat \
kmod-brcmfmac brcmfmac-firmware-43430a0-sdio wpad-basic
SUPPORTED_DEVICES:=sinovoip,bananapi-m2-plus
SUNXI_DTS:=sun8i-h3-bananapi-m2-plus
endef
TARGET_DEVICES += sun8i-h3-bananapi-m2-plus
sunxi: add Orange Pi R1 support The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-26 22:41:56 +02:00
sunxi: add support for NanoPi M1 Plus board Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-10-19 05:18:41 +02:00
define Device/sun8i-h3-nanopi-m1-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi M1 Plus
sunxi: add support for NanoPi M1 Plus board Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-10-19 05:18:41 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi \
kmod-leds-gpio kmod-ledtrig-heartbeat \
treewide: use wpad-basic for not small flash targets Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-10 19:22:41 +02:00
kmod-brcmfmac brcmfmac-firmware-43430-sdio wpad-basic
sunxi: add support for NanoPi M1 Plus board Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-10-19 05:18:41 +02:00
SUPPORTED_DEVICES:=friendlyarm,nanopi-m1-plus
SUNXI_DTS:=sun8i-h3-nanopi-m1-plus
endef
TARGET_DEVICES += sun8i-h3-nanopi-m1-plus
sunxi: build image for the NanoPi NEO The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-09-20 19:32:01 +02:00
define Device/sun8i-h3-nanopi-neo
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO
sunxi: build image for the NanoPi NEO The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-09-20 19:32:01 +02:00
SUPPORTED_DEVICES:=friendlyarm,nanopi-neo
SUNXI_DTS:=sun8i-h3-nanopi-neo
endef
TARGET_DEVICES += sun8i-h3-nanopi-neo
sunxi: add support for Orange Pi One CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 512MB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard header: SPI, I2C, GPIO, UART USB 2.0: One USB 2.0 HOST, One USB 2.0 OTG Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-02-20 14:17:45 +01:00
define Device/sun8i-h3-orangepi-one
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi One
sunxi: add support for Orange Pi One CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 512MB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard header: SPI, I2C, GPIO, UART USB 2.0: One USB 2.0 HOST, One USB 2.0 OTG Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-02-20 14:17:45 +01:00
DEVICE_PACKAGES:=kmod-rtc-sunxi
SUPPORTED_DEVICES:=xunlong,orangepi-one
SUNXI_DTS:=sun8i-h3-orangepi-one
endef
TARGET_DEVICES += sun8i-h3-orangepi-one
sunxi: build image for the NanoPi NEO The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-09-20 19:32:01 +02:00
sunxi: Add support for Xunlong Orange Pi PC CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 Onboard header pinout: SPI, I2C, 1-WIRE USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
2018-02-25 19:12:49 +01:00
define Device/sun8i-h3-orangepi-pc
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi PC
sunxi: Add support for Xunlong Orange Pi PC CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Network 10/100M Ethernet RJ45 Onboard header pinout: SPI, I2C, 1-WIRE USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Buttons: Power Button(SW4) Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI.. Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
2018-02-25 19:12:49 +01:00
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-gpio-button-hotplug
SUPPORTED_DEVICES:=xunlong,orangepi-pc
SUNXI_DTS:=sun8i-h3-orangepi-pc
endef
TARGET_DEVICES += sun8i-h3-orangepi-pc
sunxi: add support for Orange Pi PC Plus CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Storage 8 GB eMMC Onboard: Network 10/100M Ethernet RJ45 Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Known issues: -Wifi diesn't work Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-03-01 20:30:47 +01:00
define Device/sun8i-h3-orangepi-pc-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi PC Plus
sunxi: add support for Orange Pi PC Plus CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0) Memory: 1GB DDR3 (shared with GPU) Onboard: Storage TF card (Max. 64GB) / MMC card slot Onboard: Storage 8 GB eMMC Onboard: Network 10/100M Ethernet RJ45 Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV) Onboard header: SPI, I2C, GPIO, UART USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG Known issues: -Wifi diesn't work Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-03-01 20:30:47 +01:00
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-gpio-button-hotplug
SUPPORTED_DEVICES:=xunlong,orangepi-pc-plus
SUNXI_DTS:=sun8i-h3-orangepi-pc-plus
endef
TARGET_DEVICES += sun8i-h3-orangepi-pc-plus
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
define Device/sun8i-h3-orangepi-plus
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi Plus
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi
SUPPORTED_DEVICES:=xunlong,orangepi-plus
SUNXI_DTS:=sun8i-h3-orangepi-plus
endef
TARGET_DEVICES += sun8i-h3-orangepi-plus
sunxi: add Orange Pi 2 support - H3 @ 1.3 GHz - 1GiB DDR3 - 10/100Mbps Ethernet - Realtek RTL8189ETV wifi - 4 USB 2.0 Difference to the "Orange Pi Plus" is the lack of Gbit ethernet and lack of onboard flash. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-10-23 22:33:00 +02:00
define Device/sun8i-h3-orangepi-2
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi 2
sunxi: add Orange Pi 2 support - H3 @ 1.3 GHz - 1GiB DDR3 - 10/100Mbps Ethernet - Realtek RTL8189ETV wifi - 4 USB 2.0 Difference to the "Orange Pi Plus" is the lack of Gbit ethernet and lack of onboard flash. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-10-23 22:33:00 +02:00
DEVICE_PACKAGES:=kmod-rtc-sunxi
SUPPORTED_DEVICES:=xunlong,orangepi-2
SUNXI_DTS:=sun8i-h3-orangepi-2
endef
TARGET_DEVICES += sun8i-h3-orangepi-2
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
define Device/sun7i-a20-pcduino3
sunxi: convert to multi-variable device title Use data from the linux-sunxi community wiki to fill-in missing device information Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2019-07-06 04:26:00 +02:00
DEVICE_VENDOR := LinkSprite
DEVICE_MODEL := pcDuino3
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtc-sunxi kmod-ata-core kmod-ata-sunxi kmod-rtl8xxxu rtl8188eu-firmware
SUPPORTED_DEVICES:=linksprite,pcduino3
SUNXI_DTS:=sun7i-a20-pcduino3
endef
TARGET_DEVICES += sun7i-a20-pcduino3
sunxi: Add support for Banana Pi M2 Ultra CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz GPU: Mali 400 MP2 Memory: 2GB DDR3 onboard (shared with GPU) Onboard: Storage microSD card slot Onboard: Storage 8GB eMMC Onboard: Network 10/100/1000M Ethernet RJ45 Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac) Onboard header: SPI, I2C, GPIO, UART USB: Two USB 2.0 Host, One USB 2.0 OTG Known issues: - WiFi doesn't work - eMMC not supported Signed-off-by: Hal Martin <hal.martin@gmail.com>
2019-09-07 18:28:18 +02:00
define Device/sun8i-r40-bananapi-m2-ultra
DEVICE_VENDOR := LeMaker
DEVICE_MODEL := Banana Pi M2 Ultra
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-core kmod-ata-sunxi
SUPPORTED_DEVICES:=lemaker,bananapi-m2-ultra
SUNXI_DTS:=sun8i-r40-bananapi-m2-ultra
endef
TARGET_DEVICES += sun8i-r40-bananapi-m2-ultra
sunxi: split into cortex A8 and A7 subtarget Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-07-15 20:35:57 +02:00
endif
Copy Permalink