openwrt/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh

103 lines
1.9 KiB
Bash
Raw Normal View History

#
# Copyright (C) 2014-2015 OpenWrt.org
#
linksys_get_target_firmware() {
mtd: base-files: Unify dual-firmware devices (Linksys) Consistently handle boot-count reset and upgrade across ipq40xx, ipq806x, kirkwood, mvebu Dual-firmware devices often utilize a specific MTD partition to record the number of times the boot loader has initiated boot. Most of these devices are NAND, typically with a 2k erase size. When this code was ported to the ipq40xx platform, the device in hand used NOR for this partition, with a 16-byte "record" size. As the implementation of `mtd resetbc` is by-platform, the hard-coded nature of this change prevented proper operation of a NAND-based device. * Unified the "NOR" variant with the rest of the Linksys variants * Added logging to indicate success and failure * Provided a meaningful return value for scripting * "Protected" the use of `mtd resetbc` in start-up scripts so that failure does not end the boot sequence * Moved Linksys-specific actions into common `/etc/init.d/bootcount` For upgrade, these devices need to determine which partition to flash, as well as set certain U-Boot envirnment variables to change the next boot to the newly flashed version. * Moved upgrade-related environment changes out of bootcount * Combined multiple flashes of environment into single one * Current-partition detection now handles absence of `boot_part` Runtime-tested: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch.pl fixes, traded split strings for 80+ chars per line]
2019-04-10 17:28:01 +02:00
local cur_boot_part mtd_ubi0
cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
if [ -z "${cur_boot_part}" ] ; then
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
kernel1|rootfs1)
cur_boot_part=1
;;
kernel2|rootfs2)
cur_boot_part=2
;;
esac
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
"${cur_boot_part}" "${mtd_ubi0}"
fi
mtd: base-files: Unify dual-firmware devices (Linksys) Consistently handle boot-count reset and upgrade across ipq40xx, ipq806x, kirkwood, mvebu Dual-firmware devices often utilize a specific MTD partition to record the number of times the boot loader has initiated boot. Most of these devices are NAND, typically with a 2k erase size. When this code was ported to the ipq40xx platform, the device in hand used NOR for this partition, with a 16-byte "record" size. As the implementation of `mtd resetbc` is by-platform, the hard-coded nature of this change prevented proper operation of a NAND-based device. * Unified the "NOR" variant with the rest of the Linksys variants * Added logging to indicate success and failure * Provided a meaningful return value for scripting * "Protected" the use of `mtd resetbc` in start-up scripts so that failure does not end the boot sequence * Moved Linksys-specific actions into common `/etc/init.d/bootcount` For upgrade, these devices need to determine which partition to flash, as well as set certain U-Boot envirnment variables to change the next boot to the newly flashed version. * Moved upgrade-related environment changes out of bootcount * Combined multiple flashes of environment into single one * Current-partition detection now handles absence of `boot_part` Runtime-tested: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch.pl fixes, traded split strings for 80+ chars per line]
2019-04-10 17:28:01 +02:00
case $cur_boot_part in
1)
fw_setenv -s - <<-EOF
boot_part 2
auto_recovery yes
EOF
printf "kernel2"
return
;;
2)
fw_setenv -s - <<-EOF
boot_part 1
auto_recovery yes
EOF
printf "kernel1"
return
;;
*)
return
;;
esac
}
platform_do_upgrade_linksys() {
local magic_long="$(get_magic_long "$1")"
mkdir -p /var/lock
local part_label="$(linksys_get_target_firmware)"
touch /var/lock/fw_printenv.lock
if [ ! -n "$part_label" ]
then
echo "cannot find target partition"
exit 1
fi
local target_mtd=$(find_mtd_part $part_label)
[ "$magic_long" = "73797375" ] && {
CI_KERNPART="$part_label"
if [ "$part_label" = "kernel1" ]
then
CI_UBIPART="rootfs1"
else
CI_UBIPART="rootfs2"
fi
# remove "squashfs" vol (in case we are flashing over a stock image, which is also UBI)
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$( nand_find_ubi "$CI_UBIPART" )"
fi
if [ "$ubidev" ]; then
local squash_ubivol="$( nand_find_volume $ubidev squashfs )"
# kill volume
[ "$squash_ubivol" ] && ubirmvol /dev/$ubidev -N squashfs || true
fi
# complete std upgrade
nand_upgrade_tar "$1"
}
[ "$magic_long" = "27051956" ] && {
get_image "$1" | mtd write - $part_label
}
}