openwrt/target/linux/ramips/base-files/etc/uci-defaults/network

#!/bin/sh

. /etc/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh

if [ ! -x /usr/sbin/maccalc ]; then
	echo "$0: maccalc not found!"
	return
fi

ramips_setup_interfaces()
{
	local board="$1"

	ucidef_set_interface_loopback

	case $board in
	argus-atp52b | \
	b2c | \
	nw718 | \
	w502u)
		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
		;;

	f5d8235-v1 | \
	rt-n15)
		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
		ucidef_add_switch "rtl8366s" "1" "1"
		ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
		ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
		;;

	f5d8235-v2 | \
	wl-351)
		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
		ucidef_add_switch "rtl8366rb" "1" "1"
		ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
		ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
		;;

	wcr-150gn)
		ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
		;;

	wli-tx4-ag300n)
		ucidef_set_interface_lan "eth0"
		;;

	*)
		RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
		if [ -n "${RT3X5X}" ]; then
			ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
		else
			ucidef_set_interfaces_lan_wan "eth0" "eth1"
		fi
		;;
	esac
}

ramips_setup_macs()
{
	local board="$1"
	local lan_mac=""
	local wan_mac=""

	case $board in
	argus-atp52b | \
	b2c | \
	f5d8235-v1 | \
	nw718 | \
	rt-n15 | \
	wl-351)
		lan_mac=$(ramips_get_mac_binary factory 4)
		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
		;;

	dir-300-b1 |\
	dir-300-b2 |\
	dir-600-b1)
		lan_mac=$(ramips_get_mac_binary devdata 16388)
		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
		;;

	esr-9753 | \
	nbg-419n)
                lan_mac=$(ramips_get_mac_binary factory 4)
                wan_mac=$(ramips_get_mac_binary factory 40)
		;;

	f5d8235-v2)
		lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
		;;

	w502u)
                lan_mac=$(ramips_get_mac_binary factory 40)
                wan_mac=$(ramips_get_mac_binary factory 46)
		;;

	wcr-150gn)
                lan_mac=$(ramips_get_mac_binary factory 4)
                wan_mac=$(ramips_get_mac_binary factory 40)
		;;

	wli-tx4-ag300n)
		lan_mac=$(ramips_get_mac_binary factory 4)
		;;

	esac

	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}

[ -e /etc/config/network ] && exit 0

touch /etc/config/network

board=$(ramips_board_name)

ramips_setup_interfaces $board
ramips_setup_macs $board

uci commit network

exit 0
adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet SVN-Revision: 18128 2009-10-23 18:51:51 +02:00			`#!/bin/sh`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00
			`. /etc/functions.sh`
			`. /lib/ramips.sh`
ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386 2011-12-01 23:48:48 +01:00			`. /lib/functions/uci-defaults.sh`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00
			`if [ ! -x /usr/sbin/maccalc ]; then`
			`echo "$0: maccalc not found!"`
			`return`
			`fi`

ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`ramips_setup_interfaces()`
			`{`
			`local board="$1"`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00
ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386 2011-12-01 23:48:48 +01:00			`ucidef_set_interface_loopback`

ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`case $board in`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00			`argus-atp52b \| \`
ramips: setup bc2 mac addresses from the generic network script SVN-Revision: 29377 2011-12-01 23:48:37 +01:00			`b2c \| \`
ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615 2011-12-28 09:43:32 +01:00			`nw718 \| \`
			`w502u)`
ramips: fix network configuration setup SVN-Revision: 29448 2011-12-05 17:54:48 +01:00			`ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00			`;;`
ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00
ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`f5d8235-v1 \| \`
			`rt-n15)`
			`ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"`
			`ucidef_add_switch "rtl8366s" "1" "1"`
			`ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"`
			`ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"`
			`;;`

			`f5d8235-v2 \| \`
ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604 2011-12-23 15:27:16 +01:00			`wl-351)`
			`ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"`
			`ucidef_add_switch "rtl8366rb" "1" "1"`
			`ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"`
			`ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"`
			`;;`

ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`wcr-150gn)`
			`ucidef_set_interface_lan_wan "eth0.2" "eth0.1"`
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612 2011-12-27 17:56:30 +01:00			`;;`

ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`wli-tx4-ag300n)`
			`ucidef_set_interface_lan "eth0"`
ramips: setup default network configuration for RT-N15 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390 2011-12-01 23:48:54 +01:00			`;;`

ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00			`*)`
			RT3X5X=`cat /proc/cpuinfo \| grep RT3.5`
ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387 2011-12-01 23:48:51 +01:00			`if [ -n "${RT3X5X}" ]; then`
ramips: fix network configuration setup SVN-Revision: 29448 2011-12-05 17:54:48 +01:00			`ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"`
ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387 2011-12-01 23:48:51 +01:00			`else`
ramips: fix network configuration setup SVN-Revision: 29448 2011-12-05 17:54:48 +01:00			`ucidef_set_interfaces_lan_wan "eth0" "eth1"`
ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387 2011-12-01 23:48:51 +01:00			`fi`
ramips: combine network setup for all boards in one file Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376 2011-12-01 23:48:35 +01:00			`;;`
ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`esac`
			`}`

			`ramips_setup_macs()`
			`{`
			`local board="$1"`
ramips: simplify uci-defaults/network script SVN-Revision: 29383 2011-12-01 23:48:45 +01:00			`local lan_mac=""`
			`local wan_mac=""`
ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00
			`case $board in`
			`argus-atp52b \| \`
			`b2c \| \`
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617 2011-12-28 09:43:43 +01:00			`f5d8235-v1 \| \`
ramips: setup default network configuration for RT-N15 Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390 2011-12-01 23:48:54 +01:00			`nw718 \| \`
ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604 2011-12-23 15:27:16 +01:00			`rt-n15 \| \`
			`wl-351)`
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions SVN-Revision: 29450 2011-12-05 18:27:02 +01:00			`lan_mac=$(ramips_get_mac_binary factory 4)`
ramips: simplify uci-defaults/network script SVN-Revision: 29383 2011-12-01 23:48:45 +01:00			`wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)`
ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`;;`
ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454 2011-12-05 18:27:07 +01:00
ramips: fix mac addresses on the DIR-300/600 boards SVN-Revision: 29471 2011-12-06 21:06:08 +01:00			`dir-300-b1 \|\`
			`dir-300-b2 \|\`
			`dir-600-b1)`
			`lan_mac=$(ramips_get_mac_binary devdata 16388)`
			`wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)`
			`;;`

ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603 2011-12-23 15:27:10 +01:00			`esr-9753 \| \`
ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454 2011-12-05 18:27:07 +01:00			`nbg-419n)`
			`lan_mac=$(ramips_get_mac_binary factory 4)`
			`wan_mac=$(ramips_get_mac_binary factory 40)`
			`;;`
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612 2011-12-27 17:56:30 +01:00
ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`f5d8235-v2)`
			`lan_mac=$(ramips_get_mac_binary "u-boot" 262148)`
			`wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)`
			`;;`

ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615 2011-12-28 09:43:32 +01:00			`w502u)`
			`lan_mac=$(ramips_get_mac_binary factory 40)`
			`wan_mac=$(ramips_get_mac_binary factory 46)`
			`;;`

ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`wcr-150gn)`
			`lan_mac=$(ramips_get_mac_binary factory 4)`
			`wan_mac=$(ramips_get_mac_binary factory 40)`
			`;;`

ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612 2011-12-27 17:56:30 +01:00			`wli-tx4-ag300n)`
			`lan_mac=$(ramips_get_mac_binary factory 4)`
			`;;`

ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`esac`
ramips: simplify uci-defaults/network script SVN-Revision: 29383 2011-12-01 23:48:45 +01:00
ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871 2012-01-23 11:23:32 +01:00			`[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac`
			`[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac`
ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`}`

ramips: remove default network configuration, and generate that from uci-defaults SVN-Revision: 29387 2011-12-01 23:48:51 +01:00			`[ -e /etc/config/network ] && exit 0`

			`touch /etc/config/network`

ramips: setup mac and network interfaces from separate functions SVN-Revision: 29382 2011-12-01 23:48:43 +01:00			`board=$(ramips_board_name)`

			`ramips_setup_interfaces $board`
			`ramips_setup_macs $board`
ramips: use /lib/functions/uci-defaults.sh SVN-Revision: 29386 2011-12-01 23:48:48 +01:00
			`uci commit network`

			`exit 0`