From: Sven Eckelmann Date: Mon, 25 Nov 2019 10:46:50 +0100 Subject: batman-adv: Revert "disable ethtool link speed detection when auto negotiation off" The commit d60b8fc69ef2 ("batman-adv: disable ethtool link speed detection when auto negotiation off") disabled the usage of ethtool's link_ksetting when auto negotation was enabled due to invalid values when used with tun/tap virtual net_devices. According to the patch, automatic measurements should be used for these kind of interfaces. But there are major flaws with this argumentation: * automatic measurements are not implemented * auto negotiation has nothing to do with the validity of the retrieved values The first point has to be fixed by a longer patch series. The "validity" part of the second point must be addressed in the same patch series by dropping the usage of ethtool's link_ksetting (thus always doing automatic measurements over ethernet). Drop the patch again to have more default values for various net_device types/configurations. The user can still overwrite them using the batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE. Reported-by: Matthias Schiffer Signed-off-by: Sven Eckelmann Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/6e860b3d5e4147bafcda32bf9b3e769926f232c5 --- a/compat-include/linux/ethtool.h +++ b/compat-include/linux/ethtool.h @@ -21,7 +21,6 @@ struct batadv_ethtool_link_ksettings { struct { __u32 speed; __u8 duplex; - __u8 autoneg; } base; }; @@ -42,7 +41,6 @@ batadv_ethtool_get_link_ksettings(struct return ret; link_ksettings->base.duplex = cmd.duplex; - link_ksettings->base.autoneg = cmd.autoneg; link_ksettings->base.speed = ethtool_cmd_speed(&cmd); return 0; --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -120,20 +120,7 @@ static u32 batadv_v_elp_get_throughput(s rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); - - /* Virtual interface drivers such as tun / tap interfaces, VLAN, etc - * tend to initialize the interface throughput with some value for the - * sake of having a throughput number to export via ethtool. This - * exported throughput leaves batman-adv to conclude the interface - * throughput is genuine (reflecting reality), thus no measurements - * are necessary. - * - * Based on the observation that those interface types also tend to set - * the link auto-negotiation to 'off', batman-adv shall check this - * setting to differentiate between genuine link throughput information - * and placeholders installed by virtual interfaces. - */ - if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) { + if (ret == 0) { /* link characteristics might change over time */ if (link_settings.base.duplex == DUPLEX_FULL) hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;