fd63e400ba
If an alias name is used for the modem, then a check if the device exists in sysfs does not work. To fix this remove the check if the sysfs device exists. The protocoll handler already checks if the modem is responsible for this device on the next line. Signed-off-by: Florian Eckert <fe@dev.tdt.de> |
||
---|---|---|
.. | ||
files | ||
Config.in | ||
Makefile | ||
README.md |
OpenWrt ModemManager
Description
Cellular modem control and connectivity
Optional libraries libmbim and libqmi are available. Your modem may require additional kernel modules and/or the usb-modeswitch package.
Usage
Once installed, you can configure the 2G/3G/4G modem connections directly in /etc/config/network as in the following example:
config interface 'broadband'
option device '/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2.1'
option proto 'modemmanager'
option apn 'ac.vodafone.es'
option allowedauth 'pap chap'
option username 'vodafone'
option password 'vodafone'
option pincode '7423'
option iptype 'ipv4'
option lowpower '1'
option signalrate '30'
Only 'device' and 'proto' are mandatory options, the remaining ones are all optional.
The 'allowedauth' option allows limiting the list of authentication protocols. It is given as a space-separated list of values, including any of the following: 'pap', 'chap', 'mschap', 'mschapv2' or 'eap'. It will default to allowing all protocols.
The 'iptype' option supports any of these values: 'ipv4', 'ipv6' or 'ipv4v6'. It will default to 'ipv4' if not given.
The 'signalrate' option set's the signal refresh rate (in seconds) for the device. You can call signal info with command: mmcli -m 0 --signal-get