The openconnect server expects to be configured using the uci interface.
To setup a server the provides access to LAN with network address
10.100.2.0/255.255.255.0 using the VPN address range
10.100.3.0/255.255.255.0 add the following to /etc/config/ocserv:
-----------------------------------------------------------------
config ocserv 'config'
option port '4443'
option dpd '120'
option max_clients '8'
option max_same '2'
option netmask '255.255.255.0'
option ipaddr '10.100.3.0'
option auth 'plain'
option zone 'lan'
option fwport '4443'
option enable '1'
config dns
option ip '10.100.2.1'
config routes
option ip '10.100.2.0'
option netmask '255.255.255.0'
config ocservusers
option name 'test'
option password '$5$unl8uKAGNsdTh9zm$PnUHEGhDc5VHbFE2EfWwW38Bub6Y6EZ5hrFwZE1r2F1'
-----------------------------------------------------------------
This configuration also adds the user "test" with password "test". The
password is specified in the crypt(3) format.
The server can be enabled and started using:
# /etc/init.d/ocserv enable
# /etc/init.d/ocserv start
There is a luci plugin to allow configuring the server from
the web environment, available as patch over luci at
https://github.com/nmav/luci-openconnect/tree/openconnect
2bcd36b0d6