History

Andre Heider 35f4ef76e0 treewide: refactor to use PKG_BUILD_FLAGS:=gc-sections See commit da370098 "treewide: add support for "gc-sections" in PKG_BUILD_FLAGS" on the main repository. Note: This only touches packages which use all three parts (-ffunction-sections, -fdata-sections and -Wl,--gc-sections) enabled by this build flag. Some packages only use a subset, and these are left unchanged for now. Signed-off-by: Andre Heider <a.heider@gmail.com>		2023-04-08 08:38:54 +02:00
..
files	modemmanager: fix unquoted strings when launching pppd	2022-11-11 15:16:03 -08:00
Config.in	modemmanager: switch to meson build tools	2022-03-30 21:48:56 -07:00
Makefile	treewide: refactor to use PKG_BUILD_FLAGS:=gc-sections	2023-04-08 08:38:54 +02:00
README.md	modemmanager: added new proto options	2020-08-13 12:56:31 +03:00

README.md

OpenWrt ModemManager

Description

Cellular modem control and connectivity

Optional libraries libmbim and libqmi are available. Your modem may require additional kernel modules and/or the usb-modeswitch package.

Usage

Once installed, you can configure the 2G/3G/4G modem connections directly in /etc/config/network as in the following example:

config interface 'broadband'
    option device      '/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2.1'
    option proto       'modemmanager'
    option apn         'ac.vodafone.es'
    option allowedauth 'pap chap'
    option username    'vodafone'
    option password    'vodafone'
    option pincode     '7423'
    option iptype      'ipv4'
    option lowpower    '1'
    option signalrate  '30'

Only 'device' and 'proto' are mandatory options, the remaining ones are all optional.

The 'allowedauth' option allows limiting the list of authentication protocols. It is given as a space-separated list of values, including any of the following: 'pap', 'chap', 'mschap', 'mschapv2' or 'eap'. It will default to allowing all protocols.

The 'iptype' option supports any of these values: 'ipv4', 'ipv6' or 'ipv4v6'. It will default to 'ipv4' if not given.

The 'signalrate' option set's the signal refresh rate (in seconds) for the device. You can call signal info with command: mmcli -m 0 --signal-get