64 lines
2.3 KiB
Plaintext
64 lines
2.3 KiB
Plaintext
# Sample multimon configuration file
|
|
#
|
|
# This file is not required. Without it, multimon will use the default
|
|
# field layout.
|
|
#
|
|
# Temperature selection
|
|
#
|
|
# Pick "TEMPC" for Celsius or "TEMPF" for Fahrenheit. This will override
|
|
# the --enable-celsius setting from the compile. UPSTEMP (below) will
|
|
# use this setting by default.
|
|
|
|
TEMPC
|
|
|
|
# Format:
|
|
# FIELD <variable> "<field name>" "<field suffix>"
|
|
#
|
|
# <variable> is either a word from the UPS protocol like battchg (see the
|
|
# table in src/cgi/upsfetch.c) or a special word in uppercase.
|
|
#
|
|
# Special words are:
|
|
# MODEL - Show the model name for this system in cyan
|
|
#
|
|
# STATUS - Parse the status for this system using the appropriate color
|
|
#
|
|
# UPSTEMP and AMBTEMP use the default scale. This is set to C if you use
|
|
# --enable-celsius at compile time *or* if you use "TEMPC" above.
|
|
#
|
|
# UPSTEMP - Show the UPS temperature in the default scale (suffix ignored)
|
|
# AMBTEMP - Show the ambient temperature in the default scale (suffix ignored)
|
|
#
|
|
# UPSTEMPC - Show the UPS temperature in degrees C (suffix ignored)
|
|
# UPSTEMPF - Show the UPS temperature in degrees F (suffix ignored)
|
|
# AMBTEMPC - Show the ambient temperature in degrees C (suffix ignored)
|
|
# AMBTEMPF - Show the ambient temperature in degrees F (suffix ignored)
|
|
#
|
|
# They're called "special" since they actually understand the content
|
|
# being printed and do other things based on what's in there.
|
|
#
|
|
# <field name> is what you'd like this column to be called on the page.
|
|
# Remember that this is HTML, so you can actually embed markup in here.
|
|
# This means you can even include images here. You can include quotes
|
|
# (and backslashes!) in the string by escaping them with a backslash (\).
|
|
#
|
|
# <field suffix> is typically something like % or VAC. It's useful if
|
|
# you want to convey the units that apply to a value.
|
|
#
|
|
# Example config
|
|
|
|
FIELD SYSTEM "System" ""
|
|
FIELD MODEL "Model" ""
|
|
FIELD STATUS "Status" ""
|
|
FIELD battpct "Battery Chg" "%"
|
|
FIELD utility "Utility" "VAC"
|
|
FIELD loadpct "UPS Load" "%"
|
|
FIELD UPSTEMP "UPS Temp" ""
|
|
FIELD runtime "Batt. Run Time" "min."
|
|
FIELD DATA "Data" "All data"
|
|
|
|
# These are only useful if you have a Smart-UPS model with the Measure-UPS II
|
|
# measurement card. No other models presently support these features.
|
|
#
|
|
# FIELD AMBTEMP "Ambient Temp" ""
|
|
# FIELD HUMIDITY "Ambient Humidity" "%"
|