apxs is used to get information about the apache installation when
building external modules. Currently there are issues:
1.
./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET
apache2
apxs:Error: ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/apr-1-config not found!.
This error is fixed by sed script #2.
2.
./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET
cannot open ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/share/apache2/build/config_vars.mk: No such file or directory at ./staging_dir/target-mips_24kc_musl/usr/bin/apxs line 213.
This error is fixed by sed scipt #1.
Both sed scripts taken from buildroot (see [1]).
[1] https://github.com/buildroot/buildroot/blob/master/package/apache/apache.mk
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commits adds the new usteer package to the packages feed.
usteer is a daemon for steering wireless clients across frequency
bands as well as between multiple access points on a network.
Signed-off-by: David Bauer <mail@david-bauer.net>
ospf running in instance mod will keep cpu to 100% so revert offending commit
if daemon is disabled in the file while running also close that daemon
also add the pythontools to support reload
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Some users report that DAWN sometimes crashes after a while. Mostly
this happens after the new update has been rolled out.
Since I would not like to go back to the older version, I add as
a workaround for now that DAWN automatically respawned.
Workaround for:
https://github.com/berlin-open-wireless-lab/DAWN/issues/151
Signed-off-by: Nick Hainke <vincent@systemli.org>
WWAN devices may now be exposed in the new 'wwan' subsystem in the
kernel (since 5.13), initially applicable to devices exposed in PCIe
(no USB), but at some point may also apply to USB devices that until
now were exposed via other subsystems (e.g. usbmisc, tty).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
* bugfix: change killall param from -HUP to -s HUP
* bugfix: change tmpfs param from status to gateway
Signed-off-by: Stan Grishin <stangri@melmac.net>
* there are reports that 0.3.5-x versions do not work on some configs
* the development of the new features moved to the new package (pbr)
* revert to the last known good version of vpn-policy-routing
Signed-off-by: Stan Grishin <stangri@melmac.net>
* refresh patches
* disabling kres_gen_test is not required anymore for cross compilation, it was fixed upstream with the 5.4.1 release
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
This uses some definitions from <sys/cdefs.h> in gcc 8.4.0, not present
in musl or gcc11.
Also use clock_gettime() instead of syscall(__NR_clock_gettime,...),
which is not currently defined.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* update to [2021-09-27](da2501f542)
* fixes https://github.com/aarond10/https_dns_proxy/issues/125
* restart instead of reload on interface hotplug
* fixes https://github.com/openwrt/packages/issues/16794
* produce output and log entries on service start/stop
* prevent unnecessary dnsmasq restarts if service has previously updated dnsmasq settings
* allow both named and typed dnsmasq instance settings to be updated
* update 010-fix-cmakelists patch file
Signed-off-by: Stan Grishin <stangri@melmac.net>
Default to letsencrypt because the upstream default may change.
Passing --staging is no longer needed, since --serever will
select a staging server if needed.
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Georgi Valkov <gvalkov@abv.bg>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
/net/crowdsec-firewall-bouncer/
crowdsec-firewall-bouncer will fetch new and old decisions from
a CrowdSec API to add them in a blocklist used by supported firewalls.
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
/net/crowdsec/
Crowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global community-wide
IP reputation database.
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* c70773a - datastorage: use signal strength as a metric
* 14e0f83 - Don't display debugging output with DAWN_NO_OUTPUT
* 97e5de1 - uci: add neighbor list priority options
* 2b1a53c - dawn_uci: set default values
* 6eb747b - Use separate configs for 802.11g & 802.11a bands
* 1e34357 - Verify compatibility before parsing config message
* a7a8309 - List all neighbors with same score when kicking
* 3ba0fa4 - Change beacon request fields to appropriate values
* 009aab9 - Change mode config parameter from int to string
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update to GNUnet release 0.15.3.
Note that GNUnet 0.15.x is incompatible with the previous 0.14.x
wire format.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- Update haproxy download URL and hash
- Make build-target and parameters dependant on configured c-library
- Removed duplicate build-parameters
Signed-off-by: Christian Lachner <gladiac@gmail.com>
This commit fixes an issue where the `AUTOSSH_GATETIME` is not available in the `procd` environment which gets overwritten by the second `procd_set_param env` call.
It now calls the `procd_set_param env` once with the two variables, instead of twice.
Signed-off-by: Leo Soares <leo@hyper.ag>
Switch to AUTORELEASE for simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[remove irrelevant part from commit message after splitting changes]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Currently `travelmate` only support `<meta` tag
if it contains `"`. This updates `travelmate.sh` to support
`'` as well.
```html
<meta...content='1; url=
```
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
This patch to remove PowerDNS' check for whether time_t is 64-bit is not needed anymore,
due to OpenWrt now having a more recent musl libc where time_t is 64-bit on all architectures.
Signed-off-by: Wout Bertrums <wout@wbnet.eu>
Switch to AUTORELEASE for simplicity.
Switch to normal tarballs.
Add license information.
Reorganize Makefile for consistency between packages.
Add libtool patch fixing compilation under some conditions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Testing showed that additional syscalls are needed on ARMv7.
Add "clock_gettime64" and "statx" which seem to be used now instead
of "clock_gettime" and "stat" syscalls which are already listed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When Open vSwitch is configured to use a controller, but is unable to
connect to it, Open vSwitch will setup flows to allow all traffic, if
the failure mode is not configured, or set to standalone.
As this might be a security hazard, it is also possible to configure
Open vSwitch in a secure failure mode. Enabling this mode causes Open
vSwitch to drop all traffic if it is unable to connect to the
controller.
Redirect stderr of the command to /dev/null as it does not support the
--if-exists option.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Due to a copy-paste error, libopenvswitch is missing a dependency when
Open vSwitch is configured to use unbound:
Package openvswitch-libopenvswitch is missing dependencies for the following libraries:
libunbound.so.8
Use the correct config symbol to solve this.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The genhash binary is only built when IPVS is enabled, so make its
installation depend on IPVS being enabled.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add a UCI config option to set the OpenFlow datapath description. This
allows setting a human readable description of the bridge, e.g.
"Building x, Floor y, AP z", which makes it easier to recognize the AP.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Upstream released 1.0.0, so change the package to the git tag 1.0.0
Mainly documentation and argument handling changes
Signed-off-by: Damien Mascord <tusker@tusker.org>
- Added missing conffiles
- Refreshed init srcipt to adapt the new arguments
- Renamed package name to lowercase (suggestion from upstream)
- Updated dependencies and license
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* add wpa-supplicant package dependency
* removed no longer working 'db-bahn.login' and 'wifionice.login' auto-login scripts
* added the new 'wifibahn.login' script for auto-logins to captive portals WIFI@BAHN (DE),
run tested on a single ICE (station logins are currently unsupported!)
* vodafone.login prepared to support free/time limited logins (still WIP!)
* change return code handling in login scripts and travelmate
* refine f_wifi function
* fix a few conercase issues
Signed-off-by: Dirk Brenken <dev@brenken.org>
Some versions of killall do support the `killall -SIGNAL` syntax and
have only `-s SIGNAL` which should be supported everywhere.
I see the problem with *killall (PSmisc) 23.3* on latest TurrisOS 5.2
Signed-off-by: Jan Baier <jan.baier@amagical.net>
Some versions of killall do support the `killall -SIGNAL` syntax and
have only `-s SIGNAL` which should be supported everywhere.
I see the problem with *killall (PSmisc) 23.3* on latest TurrisOS 5.2
Signed-off-by: Jan Baier <jan.baier@amagical.net>
Currently there is a problem with log spam when ipv6 network
is dropped. Fix this by backporting a patch to silence these errors
when verbose logging is not enabled.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
fail2ban v0.11.2 package version 2
Following PR #15098, add fixes to build fail2ban package:
- remove use of fail2ban-python (directly use python3 in script)
- remove link to python3 in /usr/bin (break the package build)
- remove python-tests (reduce the package size)
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
To allow the script to define what it should be run with.
This let's the user use bash if it's available, or python, or perl, etc.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Update PKG_VERSION to 2.10.11
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The "-s -w" flags in GO_PKG_LDFLAGS tells the Go compiler to strip the
binaries it produces. Since the default Go package build process will
strip binaries when CONFIG_USE_STRIP or CONFIG_USE_SSTRIP are selected,
these flags are unnecessary.
When CONFIG_NO_STRIP is selected, these flags override the user's
intention of building unstripped packages.
This removes these flags for all relevant packages.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This will allow the server to know more info about the client like
HWADDR, very useful for managing IoT devices.
See: https://www.mankier.com/8/openvpn#--push-peer-info
Signed-off-by: Nguyen Quang Minh <minhnq31@fpt.com.vn>
