Manage apps and app archives on iOS devices
There have been no releases since 2020-06-16.
Use the latest git 22872c3571b8d2646a9fbb74ec1d7e186941053d
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Fuse filesystem access to iOS devices
There have been no releases since 2020-06-16.
Use the latest git 814a0e38050850937debd697fcfe6eca3de1b66f
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
There have been no releases since 2020-06-16.
Update to the latest git 6d40d0ab626eb0ffee4f005b7fdc915bc561deb9
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
There have been no releases since 2020-06-16.
Update to the latest git 360619c5f721f93f0b9d8af1a2df0b926fbcf281
Fix: --version did not print the version.
[1] changes to mode 3 CDC NCM by default. Revert back to mode 1:
Originally mode 1 was used, where a tethered iPhone appears as an
Ethernet interface, handled by the ipheth driver. This has been the
default for many years and is known to work on iPhone 3G, 4S, 7 Plus,
11 and newer. Since [2] ipheth supports CDC NCM in mode 1, and
configures the iPhone to use it.
In mode 3, the Ethernet interface is handled by kmod-usb-net-cdc-ncm.
This driver has better performance, but now the iPhone does not
provide DHCP or Internet connectivity, so we should revert to mode 1.
Analysing the network traffic, shows that both the iPhone and OpenWRT
are DHCP clients. The iPhone does not act as a DHCP server. I can set
a static IP on OpenWRT and lease 172.20.10.1 to the iPhone. Then I can
ping the iPhone and I have IPv4 connectivity. However the iPhone does
not provide Internet connectivity to OpenWRT. Maybe in mode 3, the
iPhone is a client meant to receive Internet over USB and therefore
it is not a gateway?
Attempts to switch old iPhones, such as 3G and 4S to mode 3 fail.
They remain in mode 1 and work correctly using the ipheth driver.
Comparison, tested on iPhone 7 Plus and 11
- mode 1 eth0 kmod-usb-net-ipheth 264 Mbit/s DHCP server, Internet
- mode 3 usb0 kmod-usb-net-cdc-ncm 304 Mbit/s DHCP client, no Internet
[1] c7a0dd9b82
[2] 680f8738d0
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
If the iPhone restarts while the USB cable is still connected,
tethering does not work. This can be fixed by reconnecting.
Fix: if the hotplug.d script detects that carrier is disabled
(no communication), the USB link is reset, and then the
usbmuxd service is restarted. Tethering starts even before
the iPhone is unlocked. As a side effect, if tethering is not
enabled, the iPhone will ding a second time after 5 seconds.
Add dependency on usbutils for usbreset, remove dependency on librt.
[1] https://github.com/libimobiledevice/usbmuxd/issues/218
[2] https://github.com/openwrt/openwrt/issues/12566#issuecomment-2066305622
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
This is a follow-up on the previous treewide refresh of hashes after move
to ZSTD by default for compressing tarballs, as it seems that somehow
CHECK_ALL missed couple of packages.
Fixes: 272f55e87f ("treewide: refresh hashes after move to use ZSTD as default")
Signed-off-by: Robert Marko <robimarko@gmail.com>
With the recent move to using ZSTD as the default compression format
for packaging git repo clones we must refresh all of the hashes for
the packages feed as well.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Text between interpreter line and start of first directive should only
highlighted as uninterpreted when running in template mode, so adjust
the match rule accordingly.
Fixes: #23761
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
LVM2 Version 2.03.17 - 10th November 2022
=========================================
Add new options (--fs, --fsmode) for FS handling when resizing LVs.
Fix 'lvremove -S|--select LV' to not also remove its historical LV right away.
Fix lv_active field type to binary so --select and --binary applies properly.
Switch to use mallinfo2 and use it only with glibc.
Error out in lvm shell if using a cmd argument not supported in the shell.
Fix lvm shell's lastlog command to report previous pre-command failures.
Extend VDO and VDOPOOL without flushing and locking fs.
Add --valuesonly option to lvmconfig to print only values without keys.
Updates configure with recent autoconf tooling.
Fix lvconvert --test --type vdo-pool execution.
Add json_std output format for more JSON standard compliant version of output.
Fix vdo_slab_size_mb value for converted VDO volume.
Fix many corner cases in device_id, including handling of S/N duplicates.
Fix various issues in lvmdbusd.
DM Version 1.02.187 - 10th November 2022
========================================
Add DM_REPORT_GROUP_JSON_STD for more JSON standard compliant output format.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Before this change, the tarball was downloaded as vVERSION.tar.gz.
For example, it was v2.26.1.tar.gz and that file was put into the dl folder
within the OpenWrt build system.
After this change, the tarball is properly downloaded as NAME-vVERSION.tar.gz.
In this case, it will look like this: docker-compose-v.2.26.1.tar.gz
The advantages of using this:
- Users, developers will know that what they downloaded (it has name and version)
- The tarball will not be overwritten by another package with the same version.
Signed-off-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
[added commit message]
