clocate is a small utility to determinethe location of a
802.11 capable device by using a remote locator service
(Mozilla or Google).
Signed-off-by: David Bauer <mail@david-bauer.net>
Changing a volume right after activation doesn't work well due to some
caching or race-condition issue.
Perform activation as last lvchange operation as a work-around.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* genrate UCI fstab configs for each volume before first 'up'
* remove UCI section on volume remove
* use autofs automounter for read-only volumes
* try umount on 'down'
* emulate hotplug events for UBI volume up/down
* more robust error paths
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
We previously did not identify the correct BSS from the output of
`hostapd_cli -i <phy> status`, because when asked for a vif it will
always respond with information relevant to the whole phy.
The per vif settings will use an iterator and we now try to detect
the correct BSS from that output.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
Switch URL to new upstream.
Switch to AUTORELEASE for simplicity.
Removed most patches as they have been upstreamed. Rebased the remaining
one.
Fixed license information.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* lvm: remove left-over ubus events
* lvm: resolve /dev/dm-* device name
As block-mount and blockd now use /dev/dm-* names, let uvol also return
those device names.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- use $(INSTALL_DIR) instead of mkdir
- using $(INSTALL_CONF) and then running chmod is pointless, use
$(INSTALL_DATA) directly
- /etc/xinetd.d/sane-port doesn't need read protection from non-root
users, use $(INSTALL_DATA) as well
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
On some build systems (build bots, Debian Buster for example) the
current mechanism in the Build/Install define doesn't run. Replace it
with shell fu that works.
Issue was reported, see [1].
[1] https://github.com/openwrt/packages/issues/16085
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* make sure new volumes are in state 'down' until explicitely
requested to transition to 'up' state. Useful for additional
verification steps after writing a read-only volume.
* remove unused ubus events as blockd does that much better now
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Using GPT/UUID parition table is not always a possible choice.
Add support for MBR/DOS partitioned disks to make autopart work on
legacy targets like mt7623.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
By default, there was used sks-keyservers.net pool, which has invalid
SSL certificate and they also announced that their service is deprecate
and no longer maintained.
Use the same GPG server as LXC is using by default in the newer
releases.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
To allow cross matching bssids between different exporters we need to
use the same case, as label matching is case senstive.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
There was a corner case, when a vif had no stations, that
evaluate_metrics for a station that was nil and had no collected metrics
would have been called.
Comment the code, to make it easier to understand and follow, and
simplify some variable names along the way.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
Normalizes metrics according to the Prometheus upstream metric
guidelines available at https://prometheus.io/docs/practices/naming/.
Drops the `hostapd_station_wpa` metric, because it is misleading, as it
is not a differentiator between WPA versions, like one could be led to
assume.
Exposes more flags in a more consistent manner. Their metric was
previously only exposed if the flag was present, but not if it wasn't.
The same applies issue was fixed with regards to vht caps.
After this commit the following breaking changes are in place:
- All flags have been moved below `hostapd_station_flags_$flagname`:
- `hostapd_station_ht` is now `hostapd_station_flag_ht`
- `hostapd_station_mfp` is now `hostapd_station_flag_mfp`
- `hostapd_station_vht` is now `hostapd_station_flag_vht`
- `hostapd_station_wmm` is now `hostapd_station_flag_wmm`
- New flags have been exposed:
- `hostapd_station_flag_he` for high-efficency connections
- `hostapd_station_flag_short_preamble` for short preamble connections
- `hostapd_station_flag_auth` for authentication state
- `hostapd_station_flag_assoc` for association state
- Some metrics have had their unit normalized to the SI base unit or
embedded into the metrics name:
- `hostapd_station_inactive_msec` is now
`hostapd_station_inactive_seconds`, the value is still float64 and
as such has enough precision anyway, but becomes easier to reason
about
- `hostapd_station_connected_time` has been renamed to
`hostapd_station_connected_seconds_total` so the unit, as well as
the nature of the counter is reflected
- `hostapd_station_signal` now includes its unit and is therefore
named `hostapd_station_signal_dbm`
- The packet counter metrics have been normalized to what the node
exporter uses, so it is more in line with the defaults in the
Prometheus ecosystem:
- `hostapd_station_rx_packets` is now
`hostapd_station_receive_packets_total`
- `hostapd_station_rx_bytes` is now
`hostapd_station_receive_bytes_total`
- `hostapd_station_tx_packets` is now
`hostapd_station_transmit_packets_total`
- `hostapd_station_tx_bytes` is now
`hostapd_station_transmit_bytes_total`
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
An empty line has a name and value that is nil and setting a table
index to nil breaks metrics for every vif after the first one.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
Correlating data is only possible when we have more metadata, this adds
a bunch of labels for each client, that will increase the depth of
dashboards yet to come.
In particular the changes in this commit are:
- renames the `ifname` label to `vif`
- adds `frequency`, `channel`, `bssid`, `ssid`, `encryption` and `mode`
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
Free and total bytes are now properly returned as bytes by LVM2 as
requested. No longer multiply values.
Fix parameter order of 'create' command in usage output while at it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The previous approach was to uncompress N times a big tarball (638 MB)
where N=130 is the number of supported languages. Each iteration would
only extract a single file, but it still needs to uncompress the whole
tarball. This is of course completely inefficient.
Now, we uncompress the tarball only once to extract all relevant files,
and then iterate N times to copy the file needed for each language.
This massively speeds up builds, at the expense of temporarily requiring
more build space (about 1 GB more)
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
This fixes support for x86, auc now selects the right combined image
depending on the system being booted in EFI mode or not.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The fix requires the use of the generated dnsmasq `lancache.conf` file.
So I moved configuration of the hosts directory out of the UCI and into
the generated dnsmasq configuration file to simplify the script.
Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>
Running podman as users other than root seems to require that those
users can read /usr/share/containers/seccomp.json. This change sets the
permissions on that file to match those used on Fedora.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
No longer fail in case a package is part of multiple lists (which may
happen temporarily in case it becomes 'nonshared').
Bump version to prepare for sync accross branches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* don't segfault if server reply is incomplete
* always request 'generic' image on x86/generic and x86/64
* make SNAPSHOT branches sticky, eg. stay on 21.02-SNAPSHOT and do
not 'upgrade' to 21.02.0-rc2.
* output requested server URL when debugging
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
squashfs-tools aren't of much use without xz compression support
on OpenWrt, as we build kernel with squashfs supporting only xz.
Enabled support for xz compression by default.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* quotes around all variables
* always use 'read -r' instead of 'read'
* some more minor shellcheck fixes
* reorder LVM ops for 'up' call to allow it to succeed
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This is a security release that fixes a single bug:
- tighten up plugin-finding logic (#811)
Users of libcni are strongly encouraged to update.
Added me to list of maintainers as requested by @dangowrt.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Patch fixing segfaults on nulls was removed due to patch's content being now included in conmon's source since containers/conmon@355dbf1
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
The sysroot has to point to the toolchain directory. The directory
includes libraries like libm. However, the STAGING_DIR needs to be
added to the CFLAGS.
Fixes#15773
[As suggested by jow]
Signed-off-by: Nick Hainke <vincent@systemli.org>
Added a small patch to fix compilation.
Renamed patch files to have a .patch suffix. Makes them easier to read
with vim and probably IDEs.
Remove UCLIBC depend since it's no longer present.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
gpsd-utils include management tools for GPS daemon - and this commmit
particularly introduces gpsdctl to add/remove device from the GPS
daemon's device list over control socket.
Signed-off-by: ekathva advaita <ekathva@hotmail.com>
Running podman as users other than root seems to require that those
users can read the configuration files in /etc/containers. This change
sets the permissions of /etc/containers and its contents to match those
used on Fedora.
Signed-off-by: W. Michael Petullo <mike@flyn.org>
Miscellaneous:
- Remove prompt to use docker compose in the up command
- Bump py to 1.10.0 in requirements-indirect.txt
Signed-off-by: Javier Marcet <javier@marcet.info>
* Use $(COMMITCOUNT)
* Use SPDX
* Use CA (ucert) public key
* Update repo link
* Update maintainer email
* Format description
Signed-off-by: Paul Spooren <mail@aparcar.org>
Using strcmp() to compare a version string doesn't work well.
Use verrevcmp() function from opkg instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Use sfdisk to get GPT partition by name as partition names are not
known by the kernel if added via partx.
Make sure physical volume names are unique, if possible correlate
with the disks serial number and/or card's cid.
mkf2fs apparently returns 134 even in case format succeeded, so don't
fail in that case (this fixes rw volumes large enough for F2FS to be
selected by the lvm scripts of uvol).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- Add support for AppArmor
- Gracefully stop containers and pods on shutdown
I found out that If you change location of containers to persistent storage instead of tmpfs, starting them will fail unless they have been stopped. If this is the case that reboot has occurred before pods and containers have been stopped, they cannot be started, they have to be removed and re-created. Change in initscript tries to avoid that. Even if containers are running at tmpfs, this won't hurt. Still, if something happens and system hangs/reboots/etc, script won't save you from that. It's just a attempt to make things better.
I also enabled AppArmor support for future possibilities.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Currently, this package can not be installed while using standard path
of busybox, because binary killall wants to be installed on the same
location as busybox.
Collision:
• /usr/bin/killall: busybox (new-file), psmisc (existing-file)
Many of these binaries, which provides alternatives were moved to
folder /usr/libexec like wget, sed, findutils, less.
So I moved killall to /usr/libexec and others leave in touch and added
ALTERNATIVES for it, because preinstall script is no longer necessary.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Emmit ubus events when volumes come up/down.
Make sure volume state is always well defined by introducing
additional state 'write-prepare' (wp) during mkfs.
Add init scripts to bring up volumes at boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
HAVE_LIBPCIACCESS that is currently passed through MAKE_VARS to disable
building with libpciaccess can't be set through the environment.
Instead, use CONFIG_CON_PCI, which can be passed through the environment
and will disable libpciaccess.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Switch to AUTORELEASE for simplicity.
Use autotools build.
Remove upstream patch.
Minor cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Make sure filesystem is ready when volume becomes available.
Use 'write-once' as initial state for read-only volumes, only allow
writing to volumes in that state and transision to 'read-only' once
write has completed.
Also fix a typo which prevented 'list' command from working with LVM.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bugs:
- Fix for invalid handler warning on Windows builds
- Fix config hash to trigger container recreation on IPC mode updates
- Fix conversion map for placement.max_replicas_per_node
- Remove extra scan suggestion on build
Signed-off-by: Javier Marcet <javier@marcet.info>
Features:
- Add profile filter to docker-compose config
- Add a depends_on condition to wait for successful service completion
Miscellaneous:
- Add image scan message on build
- Update warning message for --no-ansi to mention --ansi never as alternative
- Bump docker-py to 5.0.0
- Bump PyYAML to 5.4.1
- Bump python-dotenv to 0.17.0
Signed-off-by: Javier Marcet <javier@marcet.info>
The package needs libseccomp, which does not currently support arc.
In order to avoid a circular dependency, we must avoid arc here as well.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
modbus-utils was not intended to be added at this stage. Remove it.
Fixes: 312594f86 ("uvol: add new package")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
uvol is a wrapper-script which allows automated handling of storage
volumes. uvol currently comes with backend support for LVM2 and UBI,
covering practically all options for storage large enough to be
managed (NAND, SPI-NAND, eMMC, SATA, NVME, virtio-blk, ...).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This was probably a work-around for an issue with dependencies which
was fixed by
988ed00802
Remove it as all other packages with `-selinux` variants do provide
a non-SELinux-variant without any suffix and that works now, see
procd vs. procd-selinux
busybox vs. busybox-selinux
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Instead of just appending the driver serial including the '0x' prefix,
use '-' prefix instead to make it more readable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The 'autopart' package is intended for devices with rather large
block device storage (ie. SATA or MMC).
It automatically allocates the free space on the block device used
for booting into an LVM2 physical volume.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
crun is the prefered container run-time of podman, it's faster than
runc and has a much lower memory footprint.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* Updated the .ga TLD server.
* Removed the .cd and cf TLD servers.
* Removed 72 new gTLDs which are no longer active.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Ariadne Conill (1):
database: do not chroot(".") unless actually necessary
Martin Vahlensieck (1):
Use correct port when redirected
Timo Teräs (5):
db: fix control character check to use uint8_t
libfetch: send Proxy-Authorization also for https connect
del: report correctly package's provides names
Signed-off-by: Paul Spooren <mail@aparcar.org>
faster to compile.
A small selection of packages was tested going from:
Executed in 696.30 secs fish external
usr time 82.98 mins 395.00 micros 82.98 mins
sys time 9.02 mins 0.00 micros 9.02 mins
to:
Executed in 592.20 secs fish external
usr time 84.84 mins 361.00 micros 84.84 mins
sys time 8.85 mins 57.00 micros 8.85 mins
Tested by running make -j 12 and wiping staging/build_dir/target_x
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Bugs:
- Make --env-file relative to the current working directory and error out for
invalid paths. Environment file paths set with --env-file are relative to the
current working directory while the default .env file is located in the project
directory which by default is the base directory of the Compose file.
- Fix missing service property storage_opt by updating the compose schema
- Fix build extra_hosts list format
- Remove extra error message on exec
- Fix OpenSSL version mismatch error when shelling out to the ssh client
- Add missing build flags to the native builder: platform, isolation and
extra_hosts
- Remove info message on native build
- Avoid fetching logs when service logging driver is set to 'none'
Miscellaneous:
- Add compose.yml and compose.yaml to default filename list
Signed-off-by: Javier Marcet <javier@marcet.info>
Switch to AUTORELEASE for simplicity.
Add libarchive dependency since it's now used.
Build with ninja for faster compilation.
Refresh SIMD CMake patch and add musl patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Switch to AUTORELEASE for simplicity.
Switch to building with Ninja for faster speed.
Several cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changelog [1]:
Version 1.09
* Explicitly set the controlling TTY
Version 1.08
* Report when IP key has changed
* Scrub the environment variable for -e
Version 1.07
* Pass signals that should terminate to ssh
* Fix race around signal handling
* Report IPC errors to stderr
* Report if can't open -f password file
[1] https://sourceforge.net/p/sshpass/code/76/tree/trunk/ChangeLog
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Enables the compiler option that collectd is compiled with
debugging support. This is used at development stages to get
more messages from the collectd during development.
This option is default disabled.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
On my system the attribute DEVTYPE was not set. The plugin could not
read any data and the function call blocked forever on this function and did
not returned. By removing it, all block devices under `/sys/class/block`
were checked.
Block devices that do not support SMART were not evaluated. The
collected displays the following message.
smart plugin: checking SMART status of /dev/loop4.
smart plugin: unable to open /dev/loop4.
If you do not like this message, you could only enable device in the uci that
does support SMART.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* include version_code in request
* include versions of selected packages in request
* add SHA256 verification via busybox sha256sum
* sort attributes in policies alphabetically
* move all API-specific string constants to precompiler macros
* set correct MIME type for JSON post request (application/json)
* output string error message if something goes wrong
* auto-generate version string
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
