Merge pull request #23416 from systemcrash/p910nd_22_picks
P910nd v22.03 picks
This commit is contained in:
Tianling Shen
GitHub
commit
3b33d02a11
|
|
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
|
|||
|
||||
PKG_NAME:=p910nd
|
||||
PKG_VERSION:=0.97
|
||||
PKG_RELEASE:=9
|
||||
PKG_RELEASE:=11
|
||||
|
||||
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
|
||||
PKG_SOURCE_URL:=@SF/p910nd
|
||||
|
|
|
|||
|
|
@ -1,13 +1,393 @@
|
|||
#!/bin/sh
|
||||
# shellcheck disable=SC3043 # aka 'local VAR'
|
||||
# c 2024 systemcrash (GitHub)
|
||||
|
||||
#hotplug.d triggers this script on the plug {in|out} of USB printers
|
||||
|
||||
# Define the uci config section
|
||||
DAEMON=p910nd
|
||||
DAEMON_HOTPLUG="$DAEMON hotplug"
|
||||
DAEMON_ERR="daemon.err"
|
||||
DAEMON_INFO="daemon.info"
|
||||
DRIVER_HOME_DEFAULT=/opt/"$DAEMON"_drivers
|
||||
SYSUPGRADE_CONF="/etc/sysupgrade.conf"
|
||||
|
||||
# Assumptions:
|
||||
# * There is no guarantee that multiple devices are re-assigned the same
|
||||
# character device upon plug/unplug unless connection hierarchy/tree is
|
||||
# unchanged i.e. reboot gives the same order if connection topology is identical.
|
||||
# * Depends on udev. char dev number assignment order not guaranteed.
|
||||
# * most users likely only have a single printer connected (mDNS announces one)
|
||||
|
||||
# Step 1. Get /dev/usb/lpX and build THIS_USB_VIDPID from hotplug passed device.
|
||||
|
||||
# Step 2a. Absent p910nd settings, auto configure settings with provided info.
|
||||
# A usbvidpid is an anchor: to ensure the printer receives the right blob.
|
||||
# Add other ieee1284_id derived info.
|
||||
|
||||
# Step 2b. For a matching character device, augment its existing config with any
|
||||
# missing usbvidpid and ieee1284_id derived info.
|
||||
|
||||
# Step 3. For matching character device and usbvidpid: send_driver
|
||||
|
||||
# Caveat: hotplug always maps the first plugged device as /dev/usb/lp0. The 1st
|
||||
# /dev/usb/lp0 match in config gets augmented with THIS_USB_VIDPID, whether
|
||||
# it is the same "device" or not.
|
||||
# The process below runs send_driver, but the driver is not yet on disk.
|
||||
# This hotplug script aims for convenience, not technical perfection.
|
||||
# Note that this does not matter if the configured lp0 does not match the
|
||||
# current lp0. Why? We chose a specific filename for the blob, to which the user
|
||||
# provides the file post-factum. So worst-case: soft-bricking if the user puts
|
||||
# the wrong blob at the specified file path. This is an acceptable compromise to
|
||||
# perfection until we find better ways of shooting ourselves in the foot. :)
|
||||
|
||||
# It is a configuration complexity that a p910nd end-user should anyhow be aware
|
||||
# of: that multiple devices cannot simultaneously use the same /dev/usb/lpX.
|
||||
|
||||
|
||||
# If run as hotplug usb module (as opposed to usbmisc module):
|
||||
# DEV_TYPE_FILTER="usb_device"
|
||||
|
||||
# Test the script by running $0 -d.
|
||||
if [ -n "$1" ] && [ "$1" = "-d" ]; then
|
||||
# Set the variable DEBUG to true (or anything) for extra debug output
|
||||
DEBUG=true
|
||||
|
||||
# Normal hotplug invocation provides these parameters:
|
||||
DEVPATH="/devices/platform/ahb/1b400000.usb/usb2/2-1/2-1:1.0/usbmisc/lp0"
|
||||
DEVNAME="usb/lp0"
|
||||
ACTION="add"
|
||||
fi
|
||||
|
||||
# For usbmisc, hotplug passes the following usable variables:
|
||||
# $0: /sbin/hotplug-call
|
||||
# $1: usbmisc
|
||||
# $ACTION: add|remove
|
||||
# $DEVNAME: usb/lp0
|
||||
# $DEVPATH: /devices/platform/ahb/1b400000.usb/usb2/2-1/2-1:1.0/usbmisc/lp0
|
||||
# $DEVICENAME: lp0
|
||||
# $SEQNUM: 1555
|
||||
# $MAJOR: 180
|
||||
# $MINOR: 0
|
||||
|
||||
# For usb, hotplug passes the following usable variables:
|
||||
# outputs:
|
||||
# $0: /sbin/hotplug-call
|
||||
# $1: usb
|
||||
# $ACTION: add|remove|bind|unbind
|
||||
# $DEVNAME: bus/usb/002/009
|
||||
# $DEVNUM: 009
|
||||
# $DEVPATH: /devices/platform/ahb/1b400000.usb/usb2/2-1
|
||||
# $DEVICENAME: 2-1
|
||||
# $DEVTYPE: usb_device
|
||||
# $DRIVER: usb
|
||||
# $TYPE: 0/0/0
|
||||
# $PRODUCT: 3f0/4117/100
|
||||
# $SEQNUM: 1534
|
||||
# $BUSNUM: 002
|
||||
# $MAJOR: 180
|
||||
# $MINOR: 0
|
||||
|
||||
|
||||
# usbmisc scripts have access to fewer parameters than usb hotplug scripts, so
|
||||
# we must be able to assemble THIS_USB_VIDPID ourselves.
|
||||
|
||||
# use % for shortest match, and trim away "/usbmisc/lp*"
|
||||
ACTUAL_DEVPATH=${DEVPATH%/usbmisc/lp*}
|
||||
# Prepend /sys/ to get actual device path,
|
||||
ACTUAL_DEVPATH="/sys$ACTUAL_DEVPATH"
|
||||
[ "$DEBUG" ] && echo ACTUAL_DEVPATH is "$ACTUAL_DEVPATH"
|
||||
PARENT_DEVPATH=$( dirname "${ACTUAL_DEVPATH}" )
|
||||
# We might need to do this if symlinks are problematic. Might not:
|
||||
# devpath="$(readlink -f $ACTUAL_DEVPATH)"
|
||||
|
||||
|
||||
# https://www.usb.org/sites/default/files/usbprint11a021811.pdf
|
||||
# Check whether connected device is a "Printer"
|
||||
[ "$(cat "$ACTUAL_DEVPATH/bInterfaceClass")" = "07" ] && [ "$(cat "$ACTUAL_DEVPATH/bInterfaceSubClass")" = "01" ] && iAmAPrinter=true
|
||||
# Not a printer? Bail.
|
||||
[ ! "$iAmAPrinter" ] && exit 0
|
||||
|
||||
|
||||
# Port directionality
|
||||
BIP=$( cat "$ACTUAL_DEVPATH/bInterfaceProtocol" )
|
||||
[ "$DEBUG" ] && echo BIP: "$BIP"
|
||||
case $BIP in
|
||||
01 )
|
||||
BIDIR=0
|
||||
;;
|
||||
02 | 03 )
|
||||
BIDIR=1
|
||||
;;
|
||||
esac
|
||||
|
||||
# Verify that we have p910nd settings
|
||||
if ! uci -q get $DAEMON; then
|
||||
touch /etc/config/$DAEMON
|
||||
uci -q add $DAEMON $DAEMON
|
||||
uci -q commit
|
||||
fi
|
||||
|
||||
# Next, we need THIS_USB_VIDPID. This is to ensure that we send the right blob
|
||||
# to the right USB printer. THIS_USB_VIDPID is an anchor, or filter, if you will.
|
||||
|
||||
# THIS_USB_VIDPID is formed by: idVendor/idProduct
|
||||
# Found under: /sys/bus/usb/devices/*/idVendor
|
||||
# Avoid anchoring also to bcdDevice which is like a hw version
|
||||
# printer driver blobs account for different hw versions anyway, so ignore it.
|
||||
# THIS_USB_VIDPID="3f0/4117"
|
||||
|
||||
idVendor=$( cat "$PARENT_DEVPATH/idVendor" )
|
||||
idProduct=$( cat "$PARENT_DEVPATH/idProduct" )
|
||||
[ "$DEBUG" ] && echo idVendor+idProduct: "$idVendor" + "$idProduct"
|
||||
THIS_USB_VIDPID="$idVendor/$idProduct"
|
||||
# Driver blob e.g.: Hewlett-Packard_HP_LaserJet_1018_03f0_4117.bin
|
||||
|
||||
|
||||
# Not always available:
|
||||
iSerialNumber=$( cat "$PARENT_DEVPATH/iSerialNumber" 2>/dev/null ) || iSerialNumber=$( cat "$PARENT_DEVPATH/serial" 2>/dev/null )
|
||||
[ "$DEBUG" ] && echo iSerialNumber is "$iSerialNumber"
|
||||
|
||||
|
||||
# Get the special IEEE1284 Device ID string (apparently limited to 127 chars)
|
||||
ieee1284info=$(cat "$ACTUAL_DEVPATH/ieee1284_id" )
|
||||
[ "$DEBUG" ] && echo ieee1284info is "$ieee1284info"
|
||||
|
||||
|
||||
# Absent the uci daemon hotplug config group, set it to a default
|
||||
[ -z "$(uci -q get $DAEMON.@hotplug[0])" ] && uci -q add $DAEMON hotplug
|
||||
|
||||
# # Absent the driver_home path config, set it to a default
|
||||
[ -z "$(uci -q get $DAEMON.@hotplug[0].driver_home)" ] && uci -q set $DAEMON.@hotplug[-1].driver_home=$DRIVER_HOME_DEFAULT && uci -q commit $DAEMON
|
||||
|
||||
# Make the driver folder hierarchy
|
||||
if ! mkdir -p "$DRIVER_HOME_DEFAULT"; then
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_ERR" Error running 'mkdir -p' "$DRIVER_HOME_DEFAULT".
|
||||
fi
|
||||
|
||||
# Help the folder survive a sysupgrade:
|
||||
if ! grep -q "^$DRIVER_HOME_DEFAULT$" "$SYSUPGRADE_CONF" ; then
|
||||
# TODO: remove old non-existent p910nd paths from $SYSUPGRADE_CONF?
|
||||
# Absent the path, try to add it to $SYSUPGRADE_CONF
|
||||
if ! echo $DRIVER_HOME_DEFAULT >> $SYSUPGRADE_CONF; then
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_ERR" Problem adding "$DRIVER_HOME_DEFAULT" path to "$SYSUPGRADE_CONF."
|
||||
else
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_INFO" Added "$DRIVER_HOME_DEFAULT" path to "$SYSUPGRADE_CONF".
|
||||
fi
|
||||
fi
|
||||
|
||||
DRIVER_HOME=$(uci -q get $DAEMON.@hotplug[-1].driver_home)
|
||||
[ "$DEBUG" ] && echo DRIVER_HOME is "$DRIVER_HOME"
|
||||
# Trim trailing forward slash if it crept in somehow.
|
||||
DRIVER_HOME=${DRIVER_HOME%/}
|
||||
DRIVER_BLOBNAME_TAIL="$idVendor"_"$idProduct".bin
|
||||
[ "$DEBUG" ] && echo DRIVER_BLOBNAME_TAIL is "$DRIVER_BLOBNAME_TAIL"
|
||||
|
||||
|
||||
# Global device config number variable
|
||||
UCI_DEV_CFG_NUMBER=-1
|
||||
|
||||
|
||||
# find which daemon configs have the matching lpX interface
|
||||
match_current_device() {
|
||||
# Build array of /dev/usb/lpX character devices already configured
|
||||
|
||||
set -- "$(IFS=$(printf '\n') && uci -q batch <<- EOI
|
||||
get "$DAEMON".@"$DAEMON"[0].device
|
||||
get "$DAEMON".@"$DAEMON"[1].device
|
||||
get "$DAEMON".@"$DAEMON"[2].device
|
||||
get "$DAEMON".@"$DAEMON"[3].device
|
||||
get "$DAEMON".@"$DAEMON"[4].device
|
||||
get "$DAEMON".@"$DAEMON"[5].device
|
||||
get "$DAEMON".@"$DAEMON"[6].device
|
||||
get "$DAEMON".@"$DAEMON"[7].device
|
||||
get "$DAEMON".@"$DAEMON"[8].device
|
||||
get "$DAEMON".@"$DAEMON"[9].device
|
||||
EOI
|
||||
)"
|
||||
# $1-$10 are now set
|
||||
|
||||
x=0
|
||||
# shellcheck disable=SC2068
|
||||
for i in $@; do
|
||||
# $DEVNAME is passed by hotplug
|
||||
[ "$DEBUG" ] && echo UCI_DEV_CFG_NUMBER is $UCI_DEV_CFG_NUMBER and CHAR_DEV is "$CHAR_DEV"
|
||||
[ "$DEVNAME" = "${i#/dev/}" ] && UCI_DEV_CFG_NUMBER=$x && CHAR_DEV=$i
|
||||
# TODO: multiple configured devices could have same CHAR_DEV if not connected concurrently
|
||||
x=$(( x+1 ))
|
||||
done
|
||||
}
|
||||
|
||||
|
||||
get_and_store_printer_info() {
|
||||
# gets /sys/bus/usb/devices/2-1:1.0/ieee1284_id:
|
||||
# MFG:Hewlett-Packard
|
||||
# MDL:HP LaserJet 1018
|
||||
# CMD:ACL
|
||||
# CLS:PRINTER
|
||||
# DES:HP LaserJet 1018
|
||||
local MFG
|
||||
local MDL
|
||||
local CMD
|
||||
local CLS
|
||||
local DES
|
||||
local DRV
|
||||
local CID
|
||||
local CMT
|
||||
local SN
|
||||
local VER
|
||||
|
||||
|
||||
# Build array of /dev/usb/lpX character devices already configured
|
||||
match_current_device
|
||||
|
||||
uqgddu_cmd='uci -q get '"$DAEMON".@"$DAEMON"[$UCI_DEV_CFG_NUMBER]
|
||||
uqsddu_cmd='uci -q set '"$DAEMON".@"$DAEMON"[$UCI_DEV_CFG_NUMBER]
|
||||
|
||||
# set Internal Field Separator to semicolon found in ieee1284_id files
|
||||
IFS=";"
|
||||
# Got 1284 Device ID string
|
||||
set -- "$ieee1284info"
|
||||
[ "$DEBUG" ] && echo ieee1284info: "$ieee1284info"
|
||||
|
||||
# shellcheck disable=SC2068
|
||||
for i in $@; do
|
||||
[ "$DEBUG" ] && echo i:"$i"
|
||||
|
||||
case $i in
|
||||
MFG:* | MANUFACTURER:* | MFR:* )
|
||||
MFG=${i##*:};;
|
||||
MDL:* | MODEL:* )
|
||||
MDL=${i##*:};;
|
||||
CMD:* | "COMMAND SET:*" )
|
||||
CMD=${i##*:};;
|
||||
CLS:* )
|
||||
CLS=${i##*:};;
|
||||
DES:* | DESCRIPTION:* )
|
||||
DES=${i##*:};;
|
||||
DRV:* )
|
||||
DRV=${i##*:};;
|
||||
CID:* | COMPATIBLEID:* )
|
||||
CID=${i##*:};;
|
||||
COMMENT:* )
|
||||
CMT=${i##*:};;
|
||||
SN:* | SERIALNUMBER:* | SERN:* )
|
||||
SN=${i##*:};;
|
||||
VER:* )
|
||||
VER=${i##*:};;
|
||||
esac
|
||||
|
||||
[ -n "$SN" ] || SN="$iSerialNumber"
|
||||
[ "$DEBUG" ] && echo ${MFG:+MFG=$MFG} ${MDL:+MDL=$MDL} ${CMD:+CMD=$CMD} ${CLS:+CLS=$CLS} ${DES:+DES=$DES} ${SN:+SN=$SN}
|
||||
|
||||
[ "$DEBUG" ] && echo 'uci set' for UCI_DEV_CFG_NUMBER: $UCI_DEV_CFG_NUMBER
|
||||
# Take the USB info as fact: set bidir regardless. It seems to be a source of confusion.
|
||||
eval "$uqsddu_cmd.bidirectional='$BIDIR'"
|
||||
[ -z "$(eval "$uqgddu_cmd".port)" ] && eval "$uqsddu_cmd.port='0'"
|
||||
[ -z "$(eval "$uqgddu_cmd".enabled)" ] && eval "$uqsddu_cmd.enabled='1'"
|
||||
[ -z "$(eval "$uqgddu_cmd".usbvidpid)" ] && [ -n "$THIS_USB_VIDPID" ] && eval "$uqsddu_cmd.usbvidpid='$THIS_USB_VIDPID'"
|
||||
# Safe to default to on for mDNS if we found one of the mandatory properties (e.g. MDL)
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns)" ] && [ -n "$MDL" ] && eval "$uqsddu_cmd.mdns='1'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_ty)" ] && [ -n "$DES" ] && eval "$uqsddu_cmd.mdns_ty='$DES'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_product)" ] && [ -n "$DES" ] && eval "$uqsddu_cmd.mdns_product='($DES)'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_mfg)" ] && [ -n "$MFG" ] && eval "$uqsddu_cmd.mdns_mfg='$MFG'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_mdl)" ] && [ -n "$MDL" ] && eval "$uqsddu_cmd.mdns_mdl='$MDL'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_cmd)" ] && [ -n "$CMD" ] && eval "$uqsddu_cmd.mdns_cmd='$CMD'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_note)" ] && eval "$uqsddu_cmd.mdns_note='Located near router'"
|
||||
# Optional ieee1284_id parameters
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_cid)" ] && [ -n "$CID" ] && eval "$uqsddu_cmd.mdns_cid='$CID'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_cls)" ] && [ -n "$CLS" ] && eval "$uqsddu_cmd.mdns_cls='$CLS'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_cmt)" ] && [ -n "$CMT" ] && eval "$uqsddu_cmd.mdns_cmt='$CMT'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_drv)" ] && [ -n "$DRV" ] && eval "$uqsddu_cmd.mdns_drv='$DRV'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_sn)" ] && [ -n "$SN" ] && eval "$uqsddu_cmd.mdns_sn='$SN'"
|
||||
[ -z "$(eval "$uqgddu_cmd".mdns_ver)" ] && [ -n "$VER" ] && eval "$uqsddu_cmd.mdns_ver='$VER'"
|
||||
|
||||
# No previously configured device? Configure this instance. Set CHAR_DEV so we can send driver.
|
||||
[ $UCI_DEV_CFG_NUMBER -eq -1 ] && eval "$uqsddu_cmd.device=/dev/'$DEVNAME'" && CHAR_DEV=/dev/"$DEVNAME"
|
||||
|
||||
if [ -n "$MFG" ] && [ -n "$MDL" ] && [ -n "$DRIVER_BLOBNAME_TAIL" ] && [ -z "$(eval "$uqgddu_cmd".driver_file)" ]; then
|
||||
DRIVER_FILE="$MFG"_"$MDL"_"$DRIVER_BLOBNAME_TAIL"
|
||||
# Make blob filename more friendly: change space to underscore
|
||||
DRIVER_FILE="$DRIVER_HOME"/"$(echo "$DRIVER_FILE" | sed 's/ /_/g')"
|
||||
[ "$DEBUG" ] && echo DRIVER_FILE: "$DRIVER_FILE"
|
||||
uci set "$DAEMON".@"$DAEMON"[$UCI_DEV_CFG_NUMBER].driver_file="$DRIVER_FILE"
|
||||
fi
|
||||
|
||||
done
|
||||
|
||||
}
|
||||
|
||||
daemon_restart() {
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_INFO" "(Re)starting $DAEMON"
|
||||
/etc/init.d/$DAEMON restart
|
||||
}
|
||||
daemon_stop() {
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_INFO" "Stopping $DAEMON"
|
||||
/etc/init.d/$DAEMON stop
|
||||
}
|
||||
send_driver() {
|
||||
DRIVER_FILE=$( uci -q get "$DAEMON".@"$DAEMON"[$UCI_DEV_CFG_NUMBER].driver_file )
|
||||
|
||||
if [ -e "$DRIVER_FILE" ]; then
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_INFO" "Sending driver to $DAEMON printer $THIS_USB_VIDPID"
|
||||
|
||||
if ! cat "$DRIVER_FILE" > "$CHAR_DEV"; then
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_ERR" "Sending driver to $CHAR_DEV [ $THIS_USB_VIDPID ] failed for some reason."
|
||||
else
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_INFO" "Sent $DRIVER_FILE to $CHAR_DEV [ $THIS_USB_VIDPID ]."
|
||||
daemon_restart
|
||||
fi
|
||||
else
|
||||
logger -t "$DAEMON_HOTPLUG" -p "$DAEMON_ERR" "Missing driver file: $DRIVER_FILE for $CHAR_DEV [ $THIS_USB_VIDPID ] (please upload it)."
|
||||
fi
|
||||
}
|
||||
|
||||
case "$ACTION" in
|
||||
add)
|
||||
add)
|
||||
# Set permissions on the /dev/usb/lpX char dev
|
||||
[ -n "${DEVNAME}" ] && [ "${DEVNAME##usb/lp*}" = "" ] && {
|
||||
chmod 660 /dev/"$DEVNAME"
|
||||
chgrp lp /dev/"$DEVNAME"
|
||||
}
|
||||
;;
|
||||
remove)
|
||||
# device is gone
|
||||
;;
|
||||
|
||||
get_and_store_printer_info
|
||||
|
||||
[ "$DEBUG" ] && echo THIS_USB_VIDPID: "$THIS_USB_VIDPID"
|
||||
[ "$DEBUG" ] && echo CHAR_DEV: "$CHAR_DEV"
|
||||
# usb subsys only:
|
||||
# [ "$DEBUG" ] && echo DEVTYPE: $DEVTYPE
|
||||
# [ "$DEBUG" ] && echo DEV_TYPE_FILTER: $DEV_TYPE_FILTER
|
||||
# [ "$DEBUG" ] && echo PRODUCT: $PRODUCT
|
||||
|
||||
# Extra checks available when run as hotplug usb script:
|
||||
# [ "$DEVTYPE" == "${DEV_TYPE_FILTER}" ]
|
||||
# [ -z "${PRODUCT##*$THIS_USB_VIDPID*}" ]
|
||||
|
||||
# Ensure dev is character device
|
||||
if [ -n "$THIS_USB_VIDPID" ] && [ -c "$CHAR_DEV" ]; then
|
||||
# if zero string, i.e. usb_ID is a match for $PRODUCT supplied by hotplug
|
||||
if [ "$(uci -q get "$DAEMON".@"$DAEMON"[$UCI_DEV_CFG_NUMBER].usbvidpid)" = "$THIS_USB_VIDPID" ]; then
|
||||
[ "$DEBUG" ] && echo "THIS_USB_VIDPID match for $DAEMON device $THIS_USB_VIDPID."
|
||||
|
||||
send_driver
|
||||
|
||||
else
|
||||
[ "$DEBUG" ] && echo "No THIS_USB_VIDPID match."
|
||||
fi
|
||||
fi
|
||||
|
||||
;;
|
||||
remove)
|
||||
# device is gone
|
||||
;;
|
||||
# Special actions available to "usb" subsystem
|
||||
# bind)
|
||||
# # special action
|
||||
# ;;
|
||||
# unbind)
|
||||
# # special action
|
||||
# ;;
|
||||
esac
|
||||
|
||||
# Commit any changes
|
||||
[ -n "$( uci -q changes $DAEMON )" ] && uci commit $DAEMON
|
||||
|
|
|
|||
|
|
@ -2,6 +2,8 @@
|
|||
# Copyright (C) 2007 OpenWrt.org
|
||||
START=99
|
||||
USE_PROCD=1
|
||||
DAEMON_NAME="p910nd"
|
||||
CONFIG="p910nd"
|
||||
|
||||
append_bool() {
|
||||
local section="$1"
|
||||
|
|
@ -22,38 +24,69 @@ append_string() {
|
|||
}
|
||||
|
||||
start_service() {
|
||||
config_load "p910nd"
|
||||
config_foreach start_p910nd p910nd
|
||||
config_load $CONFIG
|
||||
config_foreach start_p910nd $CONFIG
|
||||
}
|
||||
|
||||
|
||||
start_p910nd() {
|
||||
local section="$1" runas_root
|
||||
config_get_bool "enabled" "$section" "enabled" '0'
|
||||
if [ "$enabled" -gt 0 ]; then
|
||||
config_get device "$section" device
|
||||
# If the device path exists, the device is connected; set it up:
|
||||
if [ "$enabled" -gt 0 ] && [ -e "$device" ]; then
|
||||
args="-d "
|
||||
config_get port "$section" port
|
||||
name=p910${port}d
|
||||
append_bool "$section" bidirectional "-b"
|
||||
append_string "$section" device "-f "
|
||||
append_string "$section" bind "-i "
|
||||
append_string "$section" port ""
|
||||
procd_open_instance $name
|
||||
procd_set_param command /usr/sbin/p910nd $args
|
||||
procd_open_instance $DAEMON_NAME
|
||||
procd_set_param command /usr/sbin/$DAEMON_NAME $args
|
||||
procd_set_param respawn
|
||||
|
||||
config_get_bool runas_root "$section" runas_root 0
|
||||
[ "$runas_root" -ne 1 ] && procd_set_param user p910nd
|
||||
[ "$runas_root" -ne 1 ] && procd_set_param user $DAEMON_NAME
|
||||
|
||||
config_get_bool "mdns" "$section" "mdns" '0'
|
||||
config_get mdns_note "$section" mdns_note
|
||||
config_get mdns_ty "$section" mdns_ty
|
||||
config_get mdns_product "$section" mdns_product
|
||||
config_get mdns_mfg "$section" mdns_mfg
|
||||
config_get mdns_mdl "$section" mdns_mdl
|
||||
config_get mdns_cmd "$section" mdns_cmd
|
||||
[ "$mdns" -gt 0 ] && procd_add_mdns "pdl-datastream" "tcp" "$((port+9100))" "note=$mdns_note" "ty=$mdns_ty" "product=$mdns_product" "usb_MFG=$mdns_mfg" "usb_MDL=$mdns_mdl" "usb_CMD=$mdns_cmd"
|
||||
if [ "$mdns" -gt 0 ]; then
|
||||
config_get mdns_note "$section" mdns_note
|
||||
config_get mdns_ty "$section" mdns_ty
|
||||
config_get mdns_product "$section" mdns_product
|
||||
config_get mdns_mfg "$section" mdns_mfg
|
||||
config_get mdns_mdl "$section" mdns_mdl
|
||||
config_get mdns_cmd "$section" mdns_cmd
|
||||
# Optional parameters
|
||||
config_get mdns_cid "$section" mdns_cid
|
||||
config_get mdns_cls "$section" mdns_cls
|
||||
config_get mdns_cmt "$section" mdns_cmt
|
||||
config_get mdns_des "$section" mdns_des
|
||||
config_get mdns_drv "$section" mdns_drv
|
||||
config_get mdns_sn "$section" mdns_sn
|
||||
config_get mdns_ver "$section" mdns_ver
|
||||
|
||||
# Set initial arguments
|
||||
set -- "pdl-datastream" "tcp" "$((port+9100))"
|
||||
set -- "$@" "txtvers=1"
|
||||
# bonjourprinting-1.2.1.pdf spec mandates (at least) MFG, MDL, CMD for Socket type
|
||||
[ -n "$mdns_note" ] && set -- "$@" "note=$mdns_note"
|
||||
[ -n "$mdns_ty" ] && set -- "$@" "ty=$mdns_ty"
|
||||
[ -n "$mdns_product" ] && set -- "$@" "product=$mdns_product"
|
||||
[ -n "$mdns_mfg" ] && set -- "$@" "usb_MFG=$mdns_mfg"
|
||||
[ -n "$mdns_mdl" ] && set -- "$@" "usb_MDL=$mdns_mdl"
|
||||
[ -n "$mdns_cmd" ] && set -- "$@" "usb_CMD=$mdns_cmd"
|
||||
# Optional parameters
|
||||
[ -n "$mdns_cid" ] && set -- "$@" "usb_CID=$mdns_cid"
|
||||
[ -n "$mdns_cls" ] && set -- "$@" "usb_CLS=$mdns_cls"
|
||||
[ -n "$mdns_cmt" ] && set -- "$@" "usb_CMT=$mdns_cmt"
|
||||
[ -n "$mdns_des" ] && set -- "$@" "usb_DES=$mdns_des"
|
||||
[ -n "$mdns_drv" ] && set -- "$@" "usb_DRV=$mdns_drv"
|
||||
[ -n "$mdns_sn" ] && set -- "$@" "usb_SN=$mdns_sn"
|
||||
[ -n "$mdns_ver" ] && set -- "$@" "usb_VER=$mdns_ver"
|
||||
|
||||
# Call procd_add_mdns with the positional parameters
|
||||
MDNS_INSTANCE_NAME="$mdns_ty" procd_add_mdns "$@"
|
||||
fi
|
||||
procd_close_instance
|
||||
fi
|
||||
}
|
||||
|
|
@ -61,6 +94,6 @@ start_p910nd() {
|
|||
service_triggers()
|
||||
{
|
||||
procd_open_trigger
|
||||
procd_add_config_trigger "config.change" "p910nd" /etc/init.d/p910nd reload
|
||||
procd_add_config_trigger "config.change" $DAEMON_NAME /etc/init.d/$DAEMON_NAME reload
|
||||
procd_close_trigger
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue