ac48e63c4a
gluon-autoupdater: no need to provide a default config just to delete it in the initial script
2014-01-20 00:06:55 +01:00
6d0234a813
gluon-autoupdater: typo corrected
2014-01-19 23:19:55 +01:00
858f9d7c9a
Merge pull request #7 from FreifunkBremen/master
...
gluon-autoupdater: get random number from /dev/urandom
2014-01-19 13:40:13 -08:00
5cad7dba41
gluon-autoupdater: get random number from urandom
...
The approach with awk's rand() wasn't really random between across
devices: When srand() was called without arguments, time() was used as
seed, which of course is the same on all devices when the script is
called via cron at HH:00:00.
This patch instead uses /dev/urandom as source of random (we don't need
cryptographically strong random numbers, so urandom is just fine) but
still uses awk for the comparison as busybox's ash cannot deal with
floats in $(())
2014-01-19 22:36:49 +01:00
e85aeabbb6
gluon-alfred: add chosen gateway and load average
2014-01-19 21:44:26 +01:00
f54ffafb1b
gluon-alfred: run every minute
...
The run frequency and exact time affect the alfred announce interval, so we can
just run it every minute to supply alfred with the most up-to-date data.
2014-01-18 21:56:05 +01:00
47866fc6eb
gluon-mesh-batman-adv: set gateway mode to client
2014-01-18 19:44:02 +01:00
8a66201813
Merge pull request #2 from FreifunkBremen/autoupdater-patches
...
gluon-autoupdater: use awk to split manifest
2014-01-17 08:10:44 -08:00
1a00f672fe
autoupdater: Use awk instead of grep+head+tail to split manifest
2014-01-17 16:09:34 +01:00
249ce3982f
gluon-mesh-batman-adv: set bat0 MAC address to primary address
2014-01-16 23:57:42 +01:00
7197eb09dc
alfred: add more traffic statistics
...
+ mgmt and forward counters
+ packet in addition to byte counters for everything
2014-01-16 23:47:41 +01:00
7cca730ce4
alfred: Add --no-sleep option to send immediately
2014-01-16 23:46:54 +01:00
238994e1e2
alfred: clean up delay code
2014-01-16 22:42:02 +01:00
8217d666ee
alfred: add random node-specific delay before sending
2014-01-16 22:36:09 +01:00
7538125a82
alfred: make traffic counters absolute
...
After a lenghty discussion, we settled on absolute vs. relative values.
Main reasons:
* stateless implementation on node possible
* convertable to relative values by differentiaion on receiver
* missed transmissions only decrease granularity, whereas relative
values would introduce wrong numbers on integration if values are
missed
2014-01-16 22:34:57 +01:00
10f419deef
alfred: add statistics (uptime+traffic)
2014-01-16 16:50:25 +01:00
bd69f55a81
gluon-mesh-vpn-fastd: enable secure handshakes
2014-01-14 19:37:15 +01:00
86b72c2042
gluon-radvd: don't run as root
2014-01-14 19:34:07 +01:00
5b6988a512
fastd: fix creation of PID file as non-root user, add secure_handshakes to example config
2014-01-14 19:33:43 +01:00
9675535afb
gluon-mesh-vpn-fastd: don't run as root
2014-01-14 18:46:17 +01:00
cfa49b30c0
gluon-core: add function to add users
2014-01-14 18:19:51 +01:00
f7cb80e7f8
Add firewall rules
...
gluon-mesh-batman-adv should not be used without firewall to prevent forwarding
of packets from the mesh to the wan interface.
For some reason, the firewall package won't work at all without
kmod-ipt-nathelper.
2014-01-14 01:50:59 +01:00
7c56102c4d
gluon-config-mode: use different document root
2014-01-13 20:17:29 +01:00
ebf4a7e8a2
Remove initscript enable/disable hacks
...
Better configure these properly.
2014-01-13 18:29:00 +01:00
138bba1222
gluon-mesh-batman-adv: disable client interface in dnsmasq
2014-01-13 18:02:45 +01:00
3e99152716
Merge pull request #4 from FreifunkBremen/master
...
alfred: added more information to send, reformatted location
2014-01-13 08:30:12 -08:00
e38a0c9f11
alfred: name -> hostname
2014-01-13 17:11:41 +01:00
f756a71de9
alfred: improved readability
2014-01-13 17:09:15 +01:00
0cfb32ce95
alfred: split up firmware info, include fastd version+status
2014-01-13 17:06:47 +01:00
9648152ef9
alfred: added more information to send, reformatted location
...
location is object with latitude and longitude
added:
* firmware
* autoupdater status
* hardware model
* primary mac address
* mesh IPv6 addresses
2014-01-13 16:10:03 +01:00
137a311e1e
gluon-autoupdater: strip trailing - from model
2014-01-13 12:45:55 +01:00
f3fec005e9
gluon-mesh-vpn-fastd: enable no_rebroadcast on the VPN interface
2014-01-13 01:03:08 +01:00
40ea8d9880
Clean up gluon-alfred
...
* Merge gluon-alfred-ffmap into gluon-alfred
* Use gluon-crond instead of alfred's "facter" mechanism based on the broken busybox crond
2014-01-12 22:37:28 +01:00
b9ac954915
added gluon-alfred and gluon-alfred-ffmap
2014-01-12 22:06:50 +01:00
2f9b06e825
gluon-autoupdater: use the new get_model function
2014-01-12 21:40:19 +01:00
37c0716b9b
gluon-core: add sh file to get model name etc.
2014-01-12 21:33:44 +01:00
877e1acd83
gluon-autoupdater: improve manifest.sample
...
Makes manifest.sample use the model instead of the board name as that is
what the script actually expects. Also, a sample signature is added.
2014-01-12 21:18:27 +01:00
d101e2d6af
gluon-autoupdater: remove dead code
...
Recently the autoupdater contained a case statement to distinguish
between TP-Link WDR3600 and TP-Link WDR4300. This was left over from
previous development versions of autoupdater that relied on the board
name instead of the model. It is thus no longer needed and be removed
safely.
2014-01-12 21:18:27 +01:00
10d163697b
gluon-config-mode: don't depend on haveged
...
Now that haveged starts before the config mode, there is no need to explicity
depend on it; instead it is just used when specified in the site configuration.
2014-01-12 00:50:43 +01:00
35494393a8
gluon-core: fixup WAN interface MAC address setting
2014-01-11 21:31:28 +01:00
ec862435d7
gluon-core: remove left over 'EOF' from config script
2014-01-11 20:34:58 +01:00
54d3ce94d3
gluon-ebtables-filter-multicast: correct interface name
2014-01-11 19:27:06 +01:00
5edc68e7c7
Don't accept router advertisements by default
2014-01-11 17:43:35 +01:00
616fef804d
Add gluon-radvd package
2014-01-11 16:05:17 +01:00
1318cf0600
next-node: rename config sections
2014-01-11 14:23:27 +01:00
fcc9b2dbd4
next-node: remove unused include
2014-01-11 14:11:42 +01:00
b939096129
Disable IPv6 forwarding on br-client
...
Disabling forwarding prevents the node from reacting to the Subnet-Router
anycast address.
2014-01-11 14:01:23 +01:00
4efe5575fe
Reimplement next-node configuration based on the new netifd version
2014-01-10 22:34:26 +01:00
4d8d989980
Add ebtables filters from the legacy firmware
2014-01-10 21:49:18 +01:00
bb3fd05d1a
Allow telnet login in config mode again
2014-01-09 10:06:36 +01:00
Matthias Schiffer