The script for setting up wXsta (/etc/uci-defaults/24c-fff-wXsta) runs
before the main WiFi config script (/etc/uci-defaults/60-fff-wireless),
so the wXsta config is deleted again by
config_foreach removeWifiIface wifi-iface
This moves the latter script (and another script for WiFi config)
before the wXsta setup, so the WiFi config will be set up correctly.
Fixes: #128
Fixes: 3d9eb1db2e ("fff-hoods/fff-wireless: Reconfigure instead of
delete and create")
Reported-by: Christian Dresel <fff@chrisi01.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Some output and exit status are hidden, as they are a valid behaviour
if the device doesn't have any radios.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
The rssileds set up by OpenWrt cannot be used in our firmware.
Despite that those are bound to "wlan0" initially, we also cannot
change them to one of our interfaces, as the interface recreation
due to configurehood seems to break something in rssileds, causing
high load.
This patch now disables the rssileds entirely, which has been found
to be the only solution reliably solving the problem of high load
under all circumstances.
While at it, add all remaining devices with rssileds enabled in
openwrt-18.06. (When updating to openwrt-19.07, most of the ubnt
will have to be added.)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This merges the wifi.* files into a single script, which improves
overview/manageability and makes merging of cases possible.
While at it, remove suppression of errors with "-q".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Previously, when configurehood switched status, all WiFi devices
were completely rewritten and all interfaces were deleted and
recreated. This is both unnecessary and ugly.
This patch redesigns WiFi setup to create all interfaces (in
parallel) initially, and then only to enable/disable them as
necessary. Where reconfiguration is necessary, only the variable
parts are changed.
Since most of the wifi-device config is already created by
OpenWrt, this builds based on the existing wifi-devices and
only removes the default wifi-ifaces.
This patch will not change the logic (codeflow) of configurehood,
but only affects how action on the WiFi devices/interfaces is
taken.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This will prevent batman-adv packet fragmentation on 802.11s mesh.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Like the network.* files, this introduces wifi.* files to set
device-specific settings.
In contrast to the former, the wifi.* settings are only run during
firstboot and only if there is a file present.
In this patch, we set the antenna gain values for the devices not
treated correctly in OpenWRT.
Side conditions:
- The script requires 50-fff-boardname and 60-fff-wireless
beforehand, so I chose 62 as number.
- The wifi command is not necessary, since after firstboot
configurehood will run "wifi" in any case
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed to base on the ubnt board names
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Adrian Schmutzler
Fabian Bläse
Christian Dresel
Tim Niemeyer