The ethernet MAC addresses of the Archer C60 v1/v2 were swapped
compared to the vendor assignment. This has been fixed in OpenWrt
after 19.07.2.
Apply this to our firmware already, so we cannot forget it later
and prevent having messed-up br-mesh MAC addresses.
The OpenWrt patches can be removed again when bumping to 19.07.3.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
At the moment, the ETHMESHMAC for the TL-WR1043ND v4 is loaded from
the config partition. The data there is written by the stock firmware,
and thus is dependent on the version installed before and may even
vary in position.
Instead, this patch uses the product-info partition, which is not
modified by stock firmware.
While at it, update the sourced library files and the comment for
both v4 and v5.
ref: 53839da46e
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
In OpenWrt commit 27eea249213b ("ar71xx: fix MAC address setup for
TL-WDR4300 board") the LAN/WAN MAC addresses for the TL-WDR3600,
TL-WDR4300 and TL-WDR4310 were changed.
This creates an overlap of the LAN und 5 GHz MAC addresses, where
the first will also affect the BATMAN interface eth0.3.
To keep BATMAN interfaces with separate addresses, this patch will
set the ETHMESHMAC to eth0 +1, corresponding to the virtual WAN device
(VLAN 2) OpenWrt sets up (which we aren't using anyway).
ref: https://github.com/openwrt/openwrt/commit/27eea249213b04a372491009850926f9282d13
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
In OpenWrt commit 8a21bc36229d ("ar71xx: fix MAC addresses for
Archer C5 v1, C7 v1/v2, WDR4900 v2") the WiFi MAC addresses for
the Archer C7 v2 were changed.
This creates an overlap of the LAN und 2.4 GHz MAC addresses, where
the first will also affect the BATMAN interface eth1.3.
To keep BATMAN interfaces with separate addresses, this patch will
set the ETHMESHMAC from eth0, corresponding to the separate WAN
device we are not using in our firmware anyway.
ref: https://github.com/openwrt/openwrt/commit/8a21bc36229d3eabad213ae47fddb4d86d76ac
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This migrates to the new configuration architecture introduced
and required in
54af5a209e
This is a side-effect of the switch to openwrt-19.07.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fabian@blaese.de: Rebase onto fff firmware master]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
As odhcpd is used as router advertisement server in layer3 variant,
but configurenetwork is still necessary, the dependency to fff-uradvd has
to be removed.
This is done by first checking, if the fff-uradvd service exists, before it
is restarted.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This interface was using 1500 anyway and setting ethernet to
MTU > 1500 might not be a good idea.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langammer <rlanghammer@web.de>
Currently, Makefile use a mixture of tabs and spaces with various
indents. This harmonizes all Makefiles to use tab indentation only.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Fixes#83
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Tested-by: Christian Dresel <fff@chrisi01.de>
This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Using wifi devices makes it possible to get mac address
without having to configure wifi networks.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-By: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
- Increment package version
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Since there is a PKG_NAME variable, there is no need to repeat
the individual package name five times.
This makes editing and particularly copying Makefiles much
easier, as only the PKG_NAME has to be changed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- mv /etc/network.* files to package
- mv /etc/config/network to package
- also removes the bsp specific root_file_system
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Changed mode of configurenetwork to 755
Signed-off-by: Tim Niemeyer <tim@tn-x.org>