So far, we are selecting specific squashfs images to be copied
from openwrt bin folder to our "final" bin directory. This has
the disadvantage that additional image types/names have to be
added explicitly, bloating the relevant code in buildscript.
With this patch, this behavior is changed in order to copy all
squashfs images for a particular device. To achieve that, the
image names in the bsp files are changed to contain a wildcard
that will be evaluated in buildscript.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
So far, building the firmware happens in parallel subdirectories
of "build", one for each subtarget. However, OpenWrt itself is
capable of hosting several target builds in its directory, so
there is no need for this extra separation.
This patch thus build all targets/subtargets directly in the
"build" folder.
Since most of the time during build is spent for the toolchain,
this will also significantly boost build time if more than one
target is used.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This device is still in PR state in OpenWrt, since ar71xx target
is deprecated and thus lacking reviewers.
It worked nicely for me anyway, so I include the current state of
the PR (has not changed for months).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
With our dynamic resetting of WiFi interfaces, the rssileds
of OpenWrt do not work correctly. This disables them as a
workaround, since they otherwise create about 20 % CPU load.
Since the MACH file for all CPE210/510 is the same, no adjustment
of the OpenWrt-tiny patch is needed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This is the correct firmware for the Unifi AC Mesh I have only
tested at Unifi AC Mesh and not at Unifi AC lite But my information
is, that both have the same Hardware
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Prepares a subtarget variable for cases where it is not 'generic'
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This is based on the LEDE pull request as on 2017-10-17.
Tested successfully on device (including flashing factory
image, no TFTP).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch adds support for the WR841N v12. For TFTP recovery, the
image name has to be wr841nv11_tp_recovery.bin (with 11, not 12)!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Dieses Patch fügt den Support für den WR1043 v4 hinzu. Dieses Patch
baut auf den LEDE Patch auf und darf erst nach dem LEDE Patch
applied werden.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
* adds openwrt patch
* adds networkconfig
power-LED is not working
Signed-off-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
[rebased to master]
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
also removed function board_clean from bsp files and board_postbuild from buildscript
Signed-off-by: Jan Kraus <mayosemmel@gmail.com>
suggested-by: Alexander Wunschik <freifunk@wunschik.net>
Co-Authored-by: Alexander Wunschik <freifunk@wunschik.net>
Co-Authored-by: Tobias Klaus <tk+ff@meskal.net>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Tobias Klaus <tk+ff@meskal.net>
Der TP-Link WA850RE ist von der Hardware baugleich mit dem WA860RE somit
wurde die Konfiguration zu größten Teilen kopiert. Der einzige
Unterschied ist der, das der Router keinen Durchgang für den Strom hat
und somit eine Steckdose blockiert.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Tim Niemeyer <tim.niemeyer@mastersword.de>
