firmware/src/packages/fff/fff-network/ar71xx/network.cpe210

PORTORDER="5 4"

WANDEV=eth0
SWITCHDEV=eth0
CLIENT_PORTS="0t"
WAN_PORTS="0t"
BATMAN_PORTS="0t"

ROUTERMAC=$(cat /sys/class/net/eth0/address)
ETHMESHMAC=$(cat /sys/class/net/w2ap/address)

. /etc/network.mode

LAN0PORT=5
LAN1PORT=4
fff-web: Extend switch port assignment display in ports.html This adds information to the switch port overview and shows the VLAN configuration. For some routers the port order is provided, so the physical arrangement is resembled in the Web UI. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org> 2017-10-15 18:17:15 +02:00			`PORTORDER="5 4"`

adds support for tp-link cpe210 Signed-off-by: Tobias Klaus <tk+ff@meskal.net> Reviewed-by: Jan Kraus <mayosemmel@gmail.com> Reviewed-by: Christian Dresel <fff@chrisi01.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org> 2016-05-11 08:40:27 +02:00			`WANDEV=eth0`
			`SWITCHDEV=eth0`
			`CLIENT_PORTS="0t"`
			`WAN_PORTS="0t"`
			`BATMAN_PORTS="0t"`

fff-network: evaluate macaddress in device config This allows for more latitude when evaluating the addresses needed for br-mesh and ethmesh. Signed-off-by: Fabian Bläse <fabian@blaese.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org> Tested-by: Fabian Bläse <fabian@blaese.de> Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2017-11-03 15:59:18 +01:00			`ROUTERMAC=$(cat /sys/class/net/eth0/address)`
			`ETHMESHMAC=$(cat /sys/class/net/w2ap/address)`
adds support for tp-link cpe210 Signed-off-by: Tobias Klaus <tk+ff@meskal.net> Reviewed-by: Jan Kraus <mayosemmel@gmail.com> Reviewed-by: Christian Dresel <fff@chrisi01.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org> 2016-05-11 08:40:27 +02:00
			`. /etc/network.mode`

fff-network: Make custom port configuration update-safe This writes CLIENT/BATMAN/WAN port configurations for devices with switches to a separate file. This file can be changed based on the desired setup and is then preserved during firmware upgrade. In case of a future bugfix concerning the entries of a specific network.* file, this will still be effective as only the port configurations reside in the new file, while the other settings could be overwritten by the upgrade. For one- and two-port devices, adjustments have been made so that their relevant settings also reside in the new file now. This also adds a WebUI interface for setting the two-port devices (CPE210 and CPE510). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Tim Niemeyer <tim@tn-x.org> Signed-off-by: Tim Niemeyer <tim@tn-x.org> - Changed doc in network.mode 2017-08-21 18:46:28 +02:00			`LAN0PORT=5`
			`LAN1PORT=4`