The rssileds set up by OpenWrt cannot be used in our firmware.
Despite that those are bound to "wlan0" initially, we also cannot
change them to one of our interfaces, as the interface recreation
due to configurehood seems to break something in rssileds, causing
high load.
This patch now disables the rssileds entirely, which has been found
to be the only solution reliably solving the problem of high load
under all circumstances.
While at it, add all remaining devices with rssileds enabled in
openwrt-18.06. (When updating to openwrt-19.07, most of the ubnt
will have to be added.)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This merges the wifi.* files into a single script, which improves
overview/manageability and makes merging of cases possible.
While at it, remove suppression of errors with "-q".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
So far, we have meta packages and config packages for the variants
in parallel, e.g. fff-node and fff-variant-node.
Since the sole purpose of the meta packages is to define
dependencies, one can just merge them into the corresponding config
packages to reduce overhead.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
In some cases (mostly for one-port devices) IF_WAN was used
although not set, resulting in not obviously iptables error
messages like
- Bad argument `conntrack'
- Bad argument `REJECT'
Thus, check whether IF_WAN is set to something before using it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In OpenWrt commit 055cdab2bb22 ("uclient: add ALTERNATIVES for wget")
uclient is registered as ALTERNATIVES provider for wget. Since
the priority for busybox as provider is lowest, this overwrites
the link set for /usr/bin/wget, now pointing to uclient wget.
However, uclient wget does not support IPv6 link-local addresses,
as it's not aware of the "%" to separate address from link identifier.
To prevent wget from failing when those addresses are used, this
patch explicitly uses busybox wget.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
As odhcpd is used as router advertisement server in layer3 variant,
but configurenetwork is still necessary, the dependency to fff-uradvd has
to be removed.
This is done by first checking, if the fff-uradvd service exists, before it
is restarted.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
On layer3 variant ("gateway firmware"), 60-fff-gateway.conf
changes "forwarding" for all interfaces, overwriting the
changes from 51-fff-network-$iface.conf.
By putting the WAN-specific commands after 60-fff-gateway.conf
this patch should provide the correct device-specific value
for WAN interface now.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Rephrased commit title and added message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
babeld filters routes before announcing them with the
redistribute filters.
Users might add unknown public subnets to the client interface,
so redistribute filters have to be generated for these addresses.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
This adds two checks:
- Does gateway config exist?
- Does gateway config version match?
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
In d9ec8edb15 ("batman-adv: Move from DEBUGFS to batctl") we
switched from deprecated DEBUGFS to batctl.
Despite debugfs, batctl seems to also have deprecated sysfs
(https://www.open-mesh.org/news/90).
This patch thus replaces a reference to iface_status by the
corresponding batctl command.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This renames two options for wireguard interfaces in
/etc/config/gateway:
public_key -> remote_public_key
private_key -> local_private_key
Signed-off-by: Alexander Gutzeit <alexander.gutzeit@web.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
[adjusted commit message/title, added version bump, remove
rename for network config]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
"ip" is one of the most essential tools on a gateway. At the moment
there is only one dependency to the metapackage ip from the nodewatcher,
which pulls ip-tiny. Dropping the nodewatcher causes a fallback to the
busybox built-in ip-command.
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[fabian@blaese.de: rebase onto master]
Signed-off-by: Fabian Bläse <fabian@blaese.de>
This package adds gateway.d scripts which create
peering interfaces using wireguard.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
When the user removes a peer from /etc/config/gateway,
the script has to be able to find any leftover configurations
that have been created for it.
This can be made very easy by prepending a prefix to every
automatically generated configuration.
This also allows to remove the nasty check for the babeld default interface.
Therefore the naming check for cfg* also can be removed.
As a side effect all manually created configuration blocks that do not match a
prefix will not be touched by configuregateway.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Various things have to be done for every interface on
which babeld shall run.
Those procedures are moved into functions to reduce duplicate code.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This adds a line containing the device name and the current
firmware version to the MOTD shown after logging in via SSH, e.g.
> TP-Link TL-WR1043N/ND v2 @ jubtl9_20190320
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Previously, when configurehood switched status, all WiFi devices
were completely rewritten and all interfaces were deleted and
recreated. This is both unnecessary and ugly.
This patch redesigns WiFi setup to create all interfaces (in
parallel) initially, and then only to enable/disable them as
necessary. Where reconfiguration is necessary, only the variable
parts are changed.
Since most of the wifi-device config is already created by
OpenWrt, this builds based on the existing wifi-devices and
only removes the default wifi-ifaces.
This patch will not change the logic (codeflow) of configurehood,
but only affects how action on the WiFi devices/interfaces is
taken.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The two different names "wXmesh" and "wXibss" have no functional
purpose and are just for indication. Remove this distinction, so
mesh is just mesh.
This will make further adjustment easier and clearer.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[Bump PKG_RELEASE and SCRIPT_VERSION]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The symbols BUSYBOX_CONFIG_WGET and
BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT are set in different
packages and do not correlate with where Busybox wget is
actually used.
This updates packages dependencies based on the current
situation.
Note that with current firmware, both two versions of wget
are installed:
/bin/wget
/usr/bin/wget
The latter is from busybox and is used as the default version.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
PKG_VERSION is meant to refer to the version of external packages,
as we do e.g. in the tunneldigger package.
For our own packages, we just need the PKG_RELEASE variable.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Rebased onto current state of master]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Although this tag is very old, this is how PKG_VERSION is meant
to be used.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This hasn't been used since it was replaced. Remove it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Because DNS Forwarding is done by dnsmasq which we configure
inside the fff-dhcp package, the configuration scripts for dns
are placed in this package.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
User configuration for layer3 firmware is stored in
/etc/config/gateway. To preserve this file across updates it
is added to sysupgrade.conf
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
fff-gateway is mandatory when compiling layer3 firmware.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This will prevent batman-adv packet fragmentation on 802.11s mesh.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This interface was using 1500 anyway and setting ethernet to
MTU > 1500 might not be a good idea.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langammer <rlanghammer@web.de>
When running OpenWrt master, "type <functionname>" only returns
"<functionname> is a function". Thus, to make the implementation
future-proof and since it is also working with the current state,
change the grep in execute_subshell to match "function".
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>