The SPDX license identifier provides a standardized way for specifying
licenses that is both human- and machine-readable. It is used upstream
both in OpenWrt and the Linux kernel.
Replace licenses in our repository by those identifiers.
The full-text licenses corresponding to these identifiers are
provided in the LICENSES folder.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Fabian Bläse <fabian@blaese.de>
uci-defaults scripts are supposed to be run once after firstboot
and then removed. However, the removal only takes place if the
subshell created for the sourced scripts returns exit code 0.
For some of the files, the last command returned a different exit
code, though, leading to the script remaining in its location and
being executed for every boot.
To prevent cases like the latter, this adds an "exit 0" to all
uci-defaults files in our package store. While at it, remove the
shebang for all these files since they are sourced (and not
executed).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
The old name "sysupgrade.sh" is easy to be confused with OpenWrt's
/sbin/sysupgrade. Rename our script to clearly indicate its
purpose.
While at it, move from /etc to /sbin, as the former is an odd location
for an executable script.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This simplifies and shortens filenames quite significantly.
A rewrite script will be installed on the update servers
to allow updating routers with older firmwares.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
In OpenWrt commit 055cdab2bb22 ("uclient: add ALTERNATIVES for wget")
uclient is registered as ALTERNATIVES provider for wget. Since
the priority for busybox as provider is lowest, this overwrites
the link set for /usr/bin/wget, now pointing to uclient wget.
However, uclient wget does not support IPv6 link-local addresses,
as it's not aware of the "%" to separate address from link identifier.
To prevent wget from failing when those addresses are used, this
patch explicitly uses busybox wget.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
User configuration for layer3 firmware is stored in
/etc/config/gateway. To preserve this file across updates it
is added to sysupgrade.conf
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
This might reduce the chance to break devices with 32 MB RAM
during sysupgrade.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
This is just meant to make image names shorter.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
This make it easier to use new targets without subtarget.
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The previous version seemed to work only for numeric data.
Fixes#113
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Fabian Bläse <fabian@blaese.de>
[Set PKG_RELEASE back to 1]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Seems like the /etc/config/fff is owned by fff-config.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
To reduce the number of possible corner cases
in the first keyxchangev2 release, this patch
removes the sector file with the intention to
add it back after release.
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Robert Langhammer <rlanghammer@web.de>
Tested-by: Fabian Bläse <fabian@blaese.de>
Add a complete hoodfile to /etc/hoodfile to use only this file
Signed-off-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Changed according to Adrian's review
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
This moves the FFF configuration from
/etc/config/system to a new file /etc/config/fff. Thus,
this file can be copied as a whole during upgrade (with
compatibility provided) and then resulting values in
other files are re-set later.
This also fixes the bandwidth settings not being persistent
during upgrade. Other settings may join ...
I tried to go through all the code and update all occurrences
of the relevant system variables (looking for "system" both
in GitHub and my local src folder).
Note that a downgrade will result in loss of configuration!
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This patch achieves multiple goals:
- Align WR841 boardnames with image names
- Fix wrong name replace in sysupgrade
- Support sysupgrade of WR841 v12
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
- Rebased
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
This removes all references to community.cfg except in the
buildscript and except the file itself.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This writes CLIENT/BATMAN/WAN port configurations for devices
with switches to a separate file. This file can be changed
based on the desired setup and is then preserved during
firmware upgrade. In case of a future bugfix concerning the
entries of a specific network.* file, this will still be
effective as only the port configurations reside in the
new file, while the other settings could be overwritten by
the upgrade.
For one- and two-port devices, adjustments have been made so
that their relevant settings also reside in the new file now.
This also adds a WebUI interface for setting the two-port
devices (CPE210 and CPE510).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Tim Niemeyer <tim@tn-x.org>
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
- Changed doc in network.mode
- This will fix the LEDs on LEDE
- We will lose the power heartbeat trigger on the LED
- We will lose the VPN signaling on the LEDs
While remove the default system config, the LEDE system now
configures wrong ntp service. We fix this by deleting these
entries in the fff-timeserver package.
If the file is already present on the devices, we need to upgrade it.
Therefore the 05-config-system-migration is now part of the fff-sysupgrade
package.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Unfortunately the sysupgrade.conf is installed by base-files. The installed file
just contains examples and will be overwritten with this.
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
Reviewed-by: Christian Dresel <fff@chrisi01.de>
Reviewed-by: Jan Kraus <mayosemmel@gmail.com>
Adrian Schmutzler
Fabian Bläse
Christian Dresel
Tim Niemeyer