diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config index 43d063c..b407f7d 100644 --- a/bsp/ar71xx/.config +++ b/bsp/ar71xx/.config @@ -6,6 +6,8 @@ CONFIG_TARGET_ar71xx_generic=y CONFIG_TARGET_MULTI_PROFILE=y CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_gl-ar150=y CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_gl-ar150="" +CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c25-v1=y +CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c25-v1="-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca9887 ath10k-firmware-qca9887-ct" CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_archer-c7-v2=y CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_archer-c7-v2="-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca988x ath10k-firmware-qca988x-ct" CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_cpe210-220=y @@ -83,6 +85,7 @@ CONFIG_CLEAN_IPKG=y # CONFIG_KERNEL_DEBUG_INFO is not set # CONFIG_KERNEL_DEBUG_KERNEL is not set # CONFIG_PACKAGE_ALFRED_VIS is not set +CONFIG_PACKAGE_ath10k-firmware-qca9887-ct=m CONFIG_PACKAGE_ath10k-firmware-qca988x-ct=m CONFIG_PACKAGE_kmod-ath10k-ct=m CONFIG_PACKAGE_kmod-hwmon-core=m diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp index 6c541cc..1137b0d 100644 --- a/bsp/board_ar71xx.bsp +++ b/bsp/board_ar71xx.bsp @@ -31,4 +31,5 @@ images=("lede-ar71xx-generic-cpe210-220-squashfs-sysupgrade.bin" "lede-ar71xx-generic-tl-wdr4300-v1-squashfs-sysupgrade.bin" "lede-ar71xx-generic-tl-wdr4310-v1-squashfs-sysupgrade.bin" "lede-ar71xx-generic-archer-c7-v2-squashfs-sysupgrade.bin" + "lede-ar71xx-generic-archer-c25-v1-squashfs-sysupgrade.bin" ) diff --git a/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch new file mode 100644 index 0000000..289322e --- /dev/null +++ b/build_patches/openwrt/0005-firmware-utils-tplink-safeloader-support-strings-as-.patch @@ -0,0 +1,162 @@ +From e9ef329106fbf7e71718e73aee8b48315dd22a18 Mon Sep 17 00:00:00 2001 +From: Jan Niehusmann +Date: Fri, 19 May 2017 09:42:24 +0200 +Subject: [PATCH 5/7] firmware-utils: tplink-safeloader: support strings as + soft_version + +Some TP-Link routers (C25, C59, C60) contain a version string instead +of a binary structure in the soft_version partition. + +Flashing LEDE from the original firmware's GUI, this version string +taken from the soft_ver partition of the firmware image is written to +the router's config partition. + +When using tftp recovery to go back to the original Archer C25 firmware, +a version check compares that version to the version of the firmware to +be flashed. + +Without proper contents in the config partition, reverting to the +original firmware fails. + +Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver +partition. + +Signed-off-by: Jan Niehusmann +[Rebased on v17.01.2] +Signed-off-by: Tim Niemeyer +--- + tools/firmware-utils/src/tplink-safeloader.c | 34 +++++++++++++++++++++++++++- + 1 file changed, 33 insertions(+), 1 deletion(-) + +diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c +index 4e3d205..688cdac 100644 +--- a/tools/firmware-utils/src/tplink-safeloader.c ++++ b/tools/firmware-utils/src/tplink-safeloader.c +@@ -75,6 +75,7 @@ struct device_info { + const char *vendor; + const char *support_list; + char support_trail; ++ const char *soft_ver; + const struct flash_partition_entry partitions[MAX_PARTITIONS+1]; + const char *first_sysupgrade_partition; + const char *last_sysupgrade_partition; +@@ -130,6 +131,7 @@ static struct device_info boards[] = { + "CPE220(TP-LINK|US|N300-2):1.1\r\n" + "CPE220(TP-LINK|EU|N300-2):1.1\r\n", + .support_trail = '\xff', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, +@@ -167,6 +169,7 @@ static struct device_info boards[] = { + "CPE520(TP-LINK|US|N300-5):1.1\r\n" + "CPE520(TP-LINK|EU|N300-5):1.1\r\n", + .support_trail = '\xff', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, +@@ -198,6 +201,7 @@ static struct device_info boards[] = { + "WBS210(TP-LINK|US|N300-2):1.20\r\n" + "WBS210(TP-LINK|EU|N300-2):1.20\r\n", + .support_trail = '\xff', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, +@@ -229,6 +233,7 @@ static struct device_info boards[] = { + "WBS510(TP-LINK|US|N300-5):1.20\r\n" + "WBS510(TP-LINK|EU|N300-5):1.20\r\n", + .support_trail = '\xff', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, +@@ -259,6 +264,7 @@ static struct device_info boards[] = { + "SupportList:\r\n" + "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n", + .support_trail = '\x00', ++ .soft_ver = NULL, + + .partitions = { + {"SBL1", 0x00000, 0x20000}, +@@ -303,6 +309,7 @@ static struct device_info boards[] = { + "product_ver:2.0.0," + "special_id:00000000}\r\n", + .support_trail = '\x00', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x40000}, +@@ -337,6 +344,7 @@ static struct device_info boards[] = { + "product_ver:1.0.0," + "special_id:00000000}\n", + .support_trail = '\x00', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x40000}, +@@ -369,6 +377,7 @@ static struct device_info boards[] = { + "SupportList:\r\n" + "EAP120(TP-LINK|UN|N300-2):1.0\r\n", + .support_trail = '\xff', ++ .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, +@@ -398,6 +407,7 @@ static struct device_info boards[] = { + "SupportList:\n" + "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n", + .support_trail = '\x00', ++ .soft_ver = NULL, + + /** + We use a bigger os-image partition than the stock images (and thus +@@ -441,6 +451,7 @@ static struct device_info boards[] = { + "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n" + "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n", + .support_trail = '\x00', ++ .soft_ver = NULL, + + /** + The flash partition table for RE450; +@@ -569,6 +580,23 @@ static struct image_partition_entry make_soft_version(uint32_t rev) { + return entry; + } + ++static struct image_partition_entry make_soft_version_from_string(const char *soft_ver) { ++ /** String length _including_ the terminating zero byte */ ++ uint32_t ver_len = strlen(soft_ver) + 1; ++ /** Partition contains 64 bit header, the version string, and one additional null byte */ ++ size_t partition_len = 2*sizeof(uint32_t) + ver_len + 1; ++ struct image_partition_entry entry = alloc_image_partition("soft-version", partition_len); ++ ++ uint32_t *len = (uint32_t *)entry.data; ++ len[0] = htonl(ver_len); ++ len[1] = 0; ++ memcpy(&len[2], soft_ver, ver_len); ++ ++ entry.data[partition_len - 1] = 0; ++ ++ return entry; ++} ++ + /** Generates the support-list partition */ + static struct image_partition_entry make_support_list(const struct device_info *info) { + size_t len = strlen(info->support_list); +@@ -799,7 +827,11 @@ static void build_image(const char *output, + struct image_partition_entry parts[6] = {}; + + parts[0] = make_partition_table(info->partitions); +- parts[1] = make_soft_version(rev); ++ if (info->soft_ver) ++ parts[1] = make_soft_version_from_string(info->soft_ver); ++ else ++ parts[1] = make_soft_version(rev); ++ + parts[2] = make_support_list(info); + parts[3] = read_file("os-image", kernel_image, false); + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof); +-- +2.1.4 + diff --git a/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch new file mode 100644 index 0000000..aa0f9ce --- /dev/null +++ b/build_patches/openwrt/0006-ar71xx-add-support-for-TP-Link-Archer-C25-v1.patch @@ -0,0 +1,499 @@ +From a5290bd7279f0aa4a7129ce103fec154239ddd86 Mon Sep 17 00:00:00 2001 +From: Ludwig Thomeczek +Date: Sat, 22 Apr 2017 18:21:47 +0200 +Subject: [PATCH 6/7] ar71xx: add support for TP-Link Archer C25 v1 + +The TP-Link Archer C25 is a low-cost dual-band router. + +Specification: + +- CPU: Atheros QCA9561 775 MHz +- RAM: 64 MB +- Flash: 8 MB +- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 +- NET: 5x 10/100 Mbps Ethernet + +Some LEDs are controlled by an additional 74HC595 chip. + +Signed-off-by: Ludwig Thomeczek +[minor code style fixes, boards alphabetical order fixes, +reworked commit message] +Signed-off-by: Piotr Dymacz +[Rebased on v17.01.2] +Signed-off-by: Tim Niemeyer +--- + target/linux/ar71xx/base-files/etc/board.d/01_leds | 9 + + .../linux/ar71xx/base-files/etc/board.d/02_network | 1 + + target/linux/ar71xx/base-files/etc/diag.sh | 1 + + .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 + + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + + target/linux/ar71xx/config-4.4 | 3 + + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 + + target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + + .../files/arch/mips/ath79/mach-archer-c25-v1.c | 227 +++++++++++++++++++++ + .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + + target/linux/ar71xx/image/tp-link.mk | 24 +++ + target/linux/ar71xx/mikrotik/config-default | 1 + + target/linux/ar71xx/nand/config-default | 1 + + 14 files changed, 285 insertions(+) + create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c + +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds +index 0279dfc..3aa2bfb 100755 +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds +@@ -49,6 +49,15 @@ antrouter-r1) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" + ;; ++archer-c25-v1) ++ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" ++ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" ++ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" ++ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" ++ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" ++ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" ++ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" ++ ;; + arduino-yun) + ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" + ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1" +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network +index c8c7827..4404e80 100755 +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network +@@ -122,6 +122,7 @@ ar71xx_setup_interfaces() + a60|\ + alfa-ap96|\ + alfa-nx|\ ++ archer-c25-v1|\ + dr344|\ + gl-ar150|\ + gl-ar300m|\ +diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh +index 7b8aac8..cf6278c 100644 +--- a/target/linux/ar71xx/base-files/etc/diag.sh ++++ b/target/linux/ar71xx/base-files/etc/diag.sh +@@ -47,6 +47,7 @@ get_status_led() { + ap135-020) + status_led="ap135:green:status" + ;; ++ archer-c25-v1|\ + mr12|\ + mr16|\ + nbg6616|\ +diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +index b3e23c9..68f90de 100644 +--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata ++++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +@@ -92,6 +92,7 @@ case "$FIRMWARE" in + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) + ;; ++ archer-c25-v1|\ + tl-wdr6500-v2) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh +index b035535..0d01c5e 100755 +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh +@@ -457,6 +457,9 @@ ar71xx_board_detect() { + *AP90Q) + name="ap90q" + ;; ++ *"Archer C25 v1") ++ name="archer-c25-v1" ++ ;; + *"Archer C5") + name="archer-c5" + ;; +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +index 580e09a..e2aaceb 100755 +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +@@ -205,6 +205,7 @@ platform_check_image() { + airrouter|\ + ap132|\ + ap90q|\ ++ archer-c25-v1|\ + bullet-m|\ + c-55|\ + carambola2|\ +diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 +index ff6bb13..79308e8 100644 +--- a/target/linux/ar71xx/config-4.4 ++++ b/target/linux/ar71xx/config-4.4 +@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_AP152=y + # CONFIG_ATH79_MACH_AP81 is not set + CONFIG_ATH79_MACH_AP90Q=y + CONFIG_ATH79_MACH_AP96=y ++CONFIG_ATH79_MACH_ARCHER_C25_V1=y + CONFIG_ATH79_MACH_ARCHER_C7=y + CONFIG_ATH79_MACH_ARDUINO_YUN=y + CONFIG_ATH79_MACH_AW_NR580=y +@@ -269,6 +270,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y + CONFIG_GENERIC_TIME_VSYSCALL=y + CONFIG_GPIOLIB=y + CONFIG_GPIOLIB_IRQCHIP=y ++CONFIG_GPIO_74X164=y + CONFIG_GPIO_DEVRES=y + # CONFIG_GPIO_LATCH is not set + CONFIG_GPIO_NXP_74HC153=y +@@ -335,6 +337,7 @@ CONFIG_LEDS_NU801=y + CONFIG_LIBFDT=y + CONFIG_MARVELL_PHY=y + CONFIG_MDIO_BITBANG=y ++CONFIG_SPI_GPIO=y + CONFIG_MDIO_BOARDINFO=y + CONFIG_MDIO_GPIO=y + CONFIG_MICREL_PHY=y +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +index 76ba6fa..d49659c 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +@@ -1224,6 +1224,17 @@ config ATH79_MACH_BSB + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_ARCHER_C25_V1 ++ bool "TP-LINK Archer C25 v1 support" ++ select SOC_QCA956X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ ++ + config ATH79_MACH_ARCHER_C7 + bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" + select SOC_QCA955X +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile +index c91d03f..fc28716 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile +@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o + obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o + obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o + obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o ++obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o + obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o + obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c +new file mode 100644 +index 0000000..a0f001c +--- /dev/null ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c +@@ -0,0 +1,227 @@ ++/* ++ * TP-Link Archer C25 v1 board support ++ * ++ * Copyright (C) 2017 Ludwig Thomeczek ++ * based on mach-archer-c60/C59-v1.c ++ * Copyright (C) 2016 Henryk Heisig ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++ ++#include "common.h" ++#include "dev-m25p80.h" ++#include "machtypes.h" ++#include "pci.h" ++#include "dev-ap9x-pci.h" ++#include "dev-eth.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-spi.h" ++#include "dev-usb.h" ++#include "dev-wmac.h" ++#include ++#include ++ ++#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */ ++#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */ ++#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */ ++#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */ ++#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */ ++ ++#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT ++#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27 ++#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28 ++#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29 ++#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30 ++#define ARCHER_C25_74HC_GPIO_LED_LAN1 23 ++#define ARCHER_C25_74HC_GPIO_LED_LAN2 24 ++#define ARCHER_C25_74HC_GPIO_LED_LAN3 25 ++#define ARCHER_C25_74HC_GPIO_LED_LAN4 26 ++ ++#define ARCHER_C25_V1_SSR_BIT_0 0 ++#define ARCHER_C25_V1_SSR_BIT_1 1 ++#define ARCHER_C25_V1_SSR_BIT_2 2 ++#define ARCHER_C25_V1_SSR_BIT_3 3 ++#define ARCHER_C25_V1_SSR_BIT_4 4 ++#define ARCHER_C25_V1_SSR_BIT_5 5 ++#define ARCHER_C25_V1_SSR_BIT_6 6 ++#define ARCHER_C25_V1_SSR_BIT_7 7 ++ ++ ++#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20 ++#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \ ++ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL) ++ ++#define ARCHER_C25_V1_GPIO_BTN_RESET 1 ++#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22 ++ ++#define ARCHER_C25_V1_GPIO_LED_POWER 17 ++#define ARCHER_C25_V1_GPIO_LED_WPS 2 ++ ++#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000 ++ ++static struct spi_gpio_platform_data archer_c25_v1_spi_data = { ++ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK, ++ .miso = SPI_GPIO_NO_MISO, ++ .mosi = ARCHER_C25_GPIO_SHIFT_SER, ++ .num_chipselect = 1, ++}; ++ ++static u8 archer_c25_v1_ssr_initdata[] __initdata = { ++ BIT(ARCHER_C25_V1_SSR_BIT_7) | ++ BIT(ARCHER_C25_V1_SSR_BIT_6) | ++ BIT(ARCHER_C25_V1_SSR_BIT_5) | ++ BIT(ARCHER_C25_V1_SSR_BIT_4) | ++ BIT(ARCHER_C25_V1_SSR_BIT_3) | ++ BIT(ARCHER_C25_V1_SSR_BIT_2) | ++ BIT(ARCHER_C25_V1_SSR_BIT_1) ++}; ++ ++static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = { ++ .base = ARCHER_C25_74HC_GPIO_BASE, ++ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata), ++ .init_data = archer_c25_v1_ssr_initdata, ++}; ++ ++static struct platform_device archer_c25_v1_spi_device = { ++ .name = "spi_gpio", ++ .id = 1, ++ .dev = { ++ .platform_data = &archer_c25_v1_spi_data, ++ }, ++}; ++ ++static struct spi_board_info archer_c25_v1_spi_info[] = { ++ { ++ .bus_num = 1, ++ .chip_select = 0, ++ .max_speed_hz = 10000000, ++ .modalias = "74x164", ++ .platform_data = &archer_c25_v1_ssr_data, ++ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK, ++ }, ++}; ++ ++static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = { ++ { ++ .name = "archer-c25-v1:green:power", ++ .gpio = ARCHER_C25_V1_GPIO_LED_POWER, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:wps", ++ .gpio = ARCHER_C25_V1_GPIO_LED_WPS, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:wlan2g", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:wlan5g", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:lan1", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:lan2", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:lan3", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:lan4", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:green:wan", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN, ++ .active_low = 1, ++ }, { ++ .name = "archer-c25-v1:amber:wan", ++ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER, ++ .active_low = 1, ++ }, ++}; ++ ++static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = { ++ { ++ .desc = "Reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "RFKILL button", ++ .type = EV_KEY, ++ .code = KEY_RFKILL, ++ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL, ++ .active_low = 1, ++ }, ++}; ++ ++static void __init archer_c25_v1_setup(void) ++{ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008); ++ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ spi_register_board_info(archer_c25_v1_spi_info, ++ ARRAY_SIZE(archer_c25_v1_spi_info)); ++ ++ platform_device_register(&archer_c25_v1_spi_device); ++ ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE, ++ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, ++ "LED control"); ++ ++ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR, ++ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, ++ "LED reset"); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio), ++ archer_c25_v1_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(archer_c25_v1_gpio_keys), ++ archer_c25_v1_gpio_keys); ++ ++ ath79_register_mdio(0, 0x0); ++ ath79_register_mdio(1, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); ++ ++ /* WAN port */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_eth0_data.phy_mask = BIT(4); ++ ath79_register_eth(0); ++ ++ /* LAN ports */ ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ath79_switch_data.phy_poll_mask |= BIT(4); ++ ath79_switch_data.phy4_mii_en = 1; ++ ath79_register_eth(1); ++ ++ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac); ++ ap91_pci_init(NULL, NULL); ++} ++ ++MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1", ++ archer_c25_v1_setup); +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +index b9a8e3e..53f0d1c 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +@@ -39,6 +39,7 @@ enum ath79_mach_type { + ATH79_MACH_AP152, /* Atheros AP152 reference board */ + ATH79_MACH_AP90Q, /* YunCore AP90Q */ + ATH79_MACH_AP96, /* Atheros AP96 */ ++ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */ + ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ + ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ + ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ +diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk +index 1c88f43..f70c12c 100644 +--- a/target/linux/ar71xx/image/tp-link.mk ++++ b/target/linux/ar71xx/image/tp-link.mk +@@ -45,6 +45,14 @@ define Build/mktplinkfw-kernel + @mv $@.new $@ + endef + ++define Build/uImageArcher ++ mkimage -A $(LINUX_KARCH) \ ++ -O linux -T kernel \ ++ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ ++ -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new ++ @mv $@.new $@ ++endef ++ + define Device/tplink + TPLINK_HWREV := 0x1 + TPLINK_HEADER_VERSION := 1 +@@ -95,6 +103,22 @@ $(Device/tplink) + IMAGE_SIZE := 15872k + endef + ++define Device/archer-c25-v1 ++ DEVICE_TITLE := TP-LINK Archer C25 v1 ++ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 ++ BOARDNAME := ARCHER-C25-V1 ++ TPLINK_BOARD_NAME := ARCHER-C25-V1 ++ DEVICE_PROFILE := ARCHERC25V1 ++ IMAGE_SIZE := 7808k ++ LOADER_TYPE := elf ++ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma ++ IMAGES := sysupgrade.bin factory.bin ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory ++ MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware) ++endef ++TARGET_DEVICES += archer-c25-v1 ++ + define Device/cpe510-520 + DEVICE_TITLE := TP-LINK CPE510/520 + DEVICE_PACKAGES := rssileds +diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default +index 44ea327..3f11c23 100644 +--- a/target/linux/ar71xx/mikrotik/config-default ++++ b/target/linux/ar71xx/mikrotik/config-default +@@ -15,6 +15,7 @@ + # CONFIG_ATH79_MACH_AP152 is not set + # CONFIG_ATH79_MACH_AP90Q is not set + # CONFIG_ATH79_MACH_AP96 is not set ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set + # CONFIG_ATH79_MACH_ARCHER_C7 is not set + # CONFIG_ATH79_MACH_ARDUINO_YUN is not set + # CONFIG_ATH79_MACH_AW_NR580 is not set +diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default +index 515266b..6357531 100644 +--- a/target/linux/ar71xx/nand/config-default ++++ b/target/linux/ar71xx/nand/config-default +@@ -8,6 +8,7 @@ + # CONFIG_ATH79_MACH_AP136 is not set + # CONFIG_ATH79_MACH_AP147 is not set + # CONFIG_ATH79_MACH_AP96 is not set ++# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set + # CONFIG_ATH79_MACH_ARCHER_C7 is not set + # CONFIG_ATH79_MACH_AW_NR580 is not set + # CONFIG_ATH79_MACH_CAP324 is not set +-- +2.1.4 + diff --git a/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch new file mode 100644 index 0000000..861ccfd --- /dev/null +++ b/build_patches/openwrt/0007-firmware-utils-tplink-safeloader-add-TP-Link-Archer-.patch @@ -0,0 +1,112 @@ +From ae91fb7f8cef0fbd9b0ee707ce577ac9c5cdf2f2 Mon Sep 17 00:00:00 2001 +From: Ludwig Thomeczek +Date: Sat, 13 May 2017 11:40:48 +0200 +Subject: [PATCH 7/7] firmware-utils: tplink-safeloader: add TP-Link Archer C25 + v1 + +This adds the necessary firmware layout definitions for the Archer C25. +It has an addtional partition containing some static data ("extra-para") +without which no factory flash is possible, therefore put_data() has been +added. + +Signed-off-by: Ludwig Thomeczek +[Rebased on v17.01.2] +Signed-off-by: Tim Niemeyer +--- + tools/firmware-utils/src/tplink-safeloader.c | 59 +++++++++++++++++++++++++++- + 1 file changed, 58 insertions(+), 1 deletion(-) + +diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c +index 688cdac..2468426 100644 +--- a/tools/firmware-utils/src/tplink-safeloader.c ++++ b/tools/firmware-utils/src/tplink-safeloader.c +@@ -299,6 +299,48 @@ static struct device_info boards[] = { + .last_sysupgrade_partition = "file-system" + }, + ++ /** Firmware layout for the C25v1 */ ++ { ++ .id = "ARCHER-C25-V1", ++ .support_list = ++ "SupportList:\n" ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n" ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n" ++ "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n", ++ .support_trail = '\x00', ++ .soft_ver = "soft_ver:1.0.0\n", ++ ++ /** ++ We use a bigger os-image partition than the stock images (and thus ++ smaller file-system), as our kernel doesn't fit in the stock firmware's ++ 1MB os-image. ++ */ ++ .partitions = { ++ {"factory-boot", 0x00000, 0x20000}, ++ {"fs-uboot", 0x20000, 0x10000}, ++ {"os-image", 0x30000, 0x180000}, /* Stock: base 0x30000 size 0x100000 */ ++ {"file-system", 0x1b0000, 0x620000}, /* Stock: base 0x130000 size 0x6a0000 */ ++ {"user-config", 0x7d0000, 0x04000}, ++ {"default-mac", 0x7e0000, 0x00100}, ++ {"device-id", 0x7e0100, 0x00100}, ++ {"extra-para", 0x7e0200, 0x00100}, ++ {"pin", 0x7e0300, 0x00100}, ++ {"support-list", 0x7e0400, 0x00400}, ++ {"soft-version", 0x7e0800, 0x00400}, ++ {"product-info", 0x7e0c00, 0x01400}, ++ {"partition-table", 0x7e2000, 0x01000}, ++ {"profile", 0x7e3000, 0x01000}, ++ {"default-config", 0x7e4000, 0x04000}, ++ {"merge-config", 0x7ec000, 0x02000}, ++ {"qos-db", 0x7ee000, 0x02000}, ++ {"radio", 0x7f0000, 0x10000}, ++ {NULL, 0, 0} ++ }, ++ ++ .first_sysupgrade_partition = "os-image", ++ .last_sysupgrade_partition = "file-system", ++ }, ++ + /** Firmware layout for the C5 */ + { + .id = "ARCHER-C5-V2", +@@ -643,6 +685,15 @@ static struct image_partition_entry read_file(const char *part_name, const char + return entry; + } + ++/** Creates a new image partition from arbitrary data */ ++static struct image_partition_entry put_data(const char *part_name, const char *datain, size_t len) { ++ ++ struct image_partition_entry entry = alloc_image_partition(part_name, len); ++ ++ memcpy(entry.data, datain, len); ++ ++ return entry; ++} + + /** + Copies a list of image partitions into an image buffer and generates the image partition table while doing so +@@ -824,7 +875,8 @@ static void build_image(const char *output, + bool add_jffs2_eof, + bool sysupgrade, + const struct device_info *info) { +- struct image_partition_entry parts[6] = {}; ++ ++ struct image_partition_entry parts[7] = {}; + + parts[0] = make_partition_table(info->partitions); + if (info->soft_ver) +@@ -836,6 +888,11 @@ static void build_image(const char *output, + parts[3] = read_file("os-image", kernel_image, false); + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof); + ++ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) { ++ const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; ++ parts[5] = put_data("extra-para", mdat, 11); ++ } ++ + size_t len; + void *image; + if (sysupgrade) +-- +2.1.4 + diff --git a/src/packages/fff/fff-network/Makefile b/src/packages/fff/fff-network/Makefile index fee3f98..d34016c 100644 --- a/src/packages/fff/fff-network/Makefile +++ b/src/packages/fff/fff-network/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=fff-network -PKG_VERSION:=0.0.6 +PKG_VERSION:=0.0.7 PKG_RELEASE:=1 PKG_BUILD_DIR:=$(BUILD_DIR)/fff-network diff --git a/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1 b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1 new file mode 100644 index 0000000..e524545 --- /dev/null +++ b/src/packages/fff/fff-network/ar71xx/network.archer-c25-v1 @@ -0,0 +1,8 @@ +WANDEV=eth0 +SWITCHDEV=eth1 +CLIENT_PORTS="1 2 0t" +WAN_PORTS="" +BATMAN_PORTS="3 4 0t" + +ETHMESHMAC=eth1 +ROUTERMAC=eth0