firmware/src/packages/fff/fff-network/ramips/network.tplink,c50-v3

. /lib/functions/fff/network

WANDEV=eth0
SWITCHDEV=eth0
CLIENT_PORTS="6t 3 4"
WAN_PORTS="6t 0"
BATMAN_PORTS="6t 1 2"

ROUTERMAC=$(cat /sys/class/net/eth0/address)
ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/net/eth0/address)")
ramips/mt76x8: Add support for TP-Link Archer C50 v3 This adds support for the TP-Link Archer C50 v3 and adds the necessary mt76x8 (sub-)target to our firmare. Flashing instructions: The image can only be flashed via TFTP, not via WebUI. 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "...-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. ref: https://github.com/openwrt/openwrt/commit/14951e8f8e09ba6e2cff140769189a66155a5345 Signed-off-by: Fabian Bläse <fabian@blaese.de> Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [extend commit title and add commit message, rebase] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-04-14 16:48:30 +02:00			`. /lib/functions/fff/network`

			`WANDEV=eth0`
			`SWITCHDEV=eth0`
			`CLIENT_PORTS="6t 3 4"`
			`WAN_PORTS="6t 0"`
			`BATMAN_PORTS="6t 1 2"`

			`ROUTERMAC=$(cat /sys/class/net/eth0/address)`
			`ETHMESHMAC=$(macFlipLocalBit "$(cat /sys/class/net/eth0/address)")`